Roller Bearings feature optimized roller crown design.

Roller Bearings feature optimized roller crown design.

Cylindrical roller bearings are single and double row spindle bearings with crown profile for optimized load distribution. Typically used in combination with double direction angular contact thrust bearings, they are suited for applications where combination of radial stiffness, high radial capacity and high precision support are required. Hybrid Ceramic (HCN) single row cylindrical roller...

Read More »
Support Bearings come in inch and metric sizes.

Support Bearings come in inch and metric sizes.

BSB Series (metric) and L-Series (inch) Ball Screw Support Bearings provide axial rigidity, coupled with low friction characteristics, to allow attainment of extreme accuracy during rapid position changes at high speeds. Rigidity is achieved through internal design and built-in universal preload. Cage options include reinforced phenolic (L-Series), or molded nylon, glass fiber reinforced...

Read More »
Spindle Bearings feature non-contacting seal.

Spindle Bearings feature non-contacting seal.

Sealed angular contact spindle bearings have non-contacting seal that helps retain lubricant and protects against premature failure caused by infiltration of contaminants. Non-contacting nature of design allows bearings to operate at running speeds up to 1.5 M dN without any impedance normally caused by seal interference. Bearings are offered in high speed (small ball) and standard (large ball)...

Read More »
Machine-Tool Bearing provides high corrosion resistance.

Machine-Tool Bearing provides high corrosion resistance.

X-Life Ultra utilizes rings made from Cronidur 30 low-nitrogen steel, ceramic (silicon nitride) balls with phenolic cage, thermally stable grease, and integral seal options. Bearing provides 10x longer life when compared to conventional 52100 and 440 hybrid ceramic bearings. Standard bore diameters range from 20 to 120 mm.

Read More »
Thermoplastic Bearing Housings are corrosion-resistant.

Thermoplastic Bearing Housings are corrosion-resistant.

Dimensionally stable bearing housings are offered in pillow block and 2- and 4-bolt styles in 204, 205, 206, and 207 sizes. They can be equipped with metal or plastic insert bearings with bore sizes from Â-½ to 1Â-½ in. (12 to 50 mm). Made of solid PBT thermoplastic polyester, they offer tensile strength of 17,300 psi. Able to be cleaned or hosed down with hot water, housings operate at...

Read More »
Sealed Bearings suit high speed applications.

Sealed Bearings suit high speed applications.

FafnirÂ-® True High-Speed Sealed Bearings (THSS) feature non-contact dynamic seals which retain grease inside and keep contamination out. CERBECÂ-® ceramic ball complement decreases friction in rolling contact area and lowers centrifugal forces. Integrated design helps prevent degradation of lubricant viscosity that could otherwise occur at temperatures above 160Â-

Read More »
Bearings improve machine tool performance.

Bearings improve machine tool performance.

FafnirÂ-® THSS True High-Speed Sealed bearings are angular contact ball bearings designed for high spindle speeds. Non-contact dynamic seals keep contamination out while minimizing running torque, and effectively retaining grease inside bearing. Fafnir WearEver(TM) bearings resist contamination-induced surface damage. They feature CERBECÂ-® ceramic ball and steel that resists wear debris...

Read More »
Bearings suit space, weight, and load constraint applications.

Bearings suit space, weight, and load constraint applications.

Thin-section ball bearings have bore diameter greater than 4 times radial cross section. Bore sizes range from 1 to 40 in. in 7 cross sections from 3/16 to 1 in. Bearings are also available in metric sizes and in radial, angular, and 4-point contact designs. User may specify seals, separators, and materials such as SAE 52100 steel, 440C stainless steel, and 17-4 stainless steel. Bearings are...

Read More »
Shaft, Rail, and Bearing Assemblies are offered in 2 metals.

Shaft, Rail, and Bearing Assemblies are offered in 2 metals.

EasyLinear(TM) Express Shaft, Rail, and Bearing Assemblies (SRBs) include guide bar shafts available in steel and stainless steel versions. SRBs can be specified with TeflonÂ-® composite bearings with case hardened steel shafting or hard skinned 303 stainless steel shaft. Ball bearings can be specified with case hardened steel shafting. EasyLinear Express SRBs can be cut to length.

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics