RF Amplifier suits FTTH applications.

Equipped with integrated AGC circuit, Model ACA2604 eliminates need for additional external circuit to implement AGC. Unit features 24 dB gain and operates from 50-870 MHz with 400 W differential input impedance. Housed in 5 x 5 x 1 mm, surface mount package, RoHS-compliant amplifier requires single +5 V supply. Device delivers performance and signal integrity required by GPON residential triple...

Read More »
Tunable Low Noise Amplifiers achieve less than 1 dB.

Tunable Low Noise Amplifiers achieve less than 1 dB.

Developed on LH3 0.5 Â-µm pHEMT process and supplied in RoHS-compliant SOT-26 SMT plastic package, M/A-COM MAAL-007304 and MAAL-007306 have noise figures less than 1 dB across respective designed frequency ranges of up to 3 or 2 GHz. They employ monolithic, 2-stage, self-biased design and operate from one 3.0 V supply. Supplied in RoHS-compliant SC-70 SMT plastic package, MAAL-008550 employs...

Read More »
Photodetector-Preamplifier suits low-light-level tasks.

Photodetector-Preamplifier suits low-light-level tasks.

Suited for tight spaces, 6 mmÂ-² Model ODA-6W-100M includes shielded amplifier electronics and operates in NIR wavelength with response at 940 nm. Standard version features 500 MW gain with custom gains also available. Housed in hermetically sealed TO-39 package, infrared component's operating and storage temperature ranges from -25 to +100Â-

Read More »

Xilinx Announces Digital Pre-Distortion Reference Design for Freescale's LDMOS Power Amplifier Devices

Industry leaders collaborate to substantially decrease radio development time, increase efficiency and reduce cost for wireless infrastructure BARCELONA, Spain, Feb. 11 -- Xilinx Inc. (NASDAQ:XLNX), the world's leading supplier of programmable logic solutions, today announced a new digital pre-distortion (DPD) reference design based on its Virtex(TM) family of platform FPGAs and XtremeDSP...

Read More »

Power Amplifier suits 3G wireless handsets and equipment.

Designed to meet all requirements for GSM/GPRS and EDGE operations in dual-, tri-, or quad-band handsets, Model AWE6174 Polar EDGE power amplifier (PA) module supports use of dc-dc converter to modulate bias voltage and reduce current consumption. It includes separate amplifiers for GSM850/900 and DCS/PCS bands optimized for high performance in both GMSK and 8PSK modes in 6 x 6 mm package. Unit...

Read More »
Power Amplifier targets high-efficiency VSAT applications.

Power Amplifier targets high-efficiency VSAT applications.

Designed for Very Small Aperture Terminal (VSAT) applications, M/A-COM MAAPSS0111 is 13.75-14.5 GHz, 4-stage, 1.25 W power amplifier that can be used as driver or output stage amplifier. It is designed to generate 31 dBm of saturated output power while drawing 530 mA of current. Housed in RoHS-compliant, 6 mm 28-lead PQFN package, unit has typical power gain of 32 dB with operating voltage of 8.0...

Read More »

Audio Line Driver has power supply range of 1.8-4.5 V.

Available in 4 x 4 mm package, Model DRV601 2VRMS DirectPath(TM) integrates charge pump to allow complete audio output signal chain to run from single 3.3 V power supply. It features 2VRMS/channel output voltage into 600 W at 3.3 V, independent right and left channel shutdown control, greater than 105 dB dynamic range, short-circuit and thermal protection, and pop reduction circuitry. It is...

Read More »
Amplifier-Digitizer handles large strain gage applications.

Amplifier-Digitizer handles large strain gage applications.

Designed for Series 6000 DAQ System, Model 6037 is 8-channel strain gage and transducer signal conditioning-amplifier-digitizer that automatically ranges gain according to signal level. Excitation is programmed in 1 V steps from 0-12 V, while 4-pole, low-pass filter provides bandwidths from 1 Hz to 1 kHz with programmable selection of filtered or wideband output. Unit features 16-bit Adc that...

Read More »

Gooch & Housego Receives Prestigious Award from Lawrence Livermore National Laboratory

February 5th, 2008 - Gooch and Housego has been presented with a Vendor Appreciation award from the Lawrence Livermore National Laboratory (LLNL) for the supply of crystal quartz wave plates. The wave plates, supplied by Gooch & Housego Ilminster, in the UK, are key components used in the National Ignition Facility's (NIF) laser pre-amplifier modules at LLNL. The NIF will be used as part of the...

Read More »
Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring
Sponsored

Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring

Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.

Read More »

All Topics