New Amplifiers Products

Signal Conditioner/Amplifier accepts high level signals.

With frequency response of 110 kHz, Model A2 features digital control of system instrumentation and monitoring of 10 Vdc analog outputs, both locally on control panel and remotely by Ethernet from PC. Embedded web server is scalable in multiples of 8 channels to maximum of 128. All system, card, and channel settings are accessible using HTTP commands or GUI provided by system. Model A2 is...

Current Sense Amplifier features 6 gain settings.

Able to sense input voltage to 48 V, high side LT6100 uses internal resistors and can be configured for one of 6 gain settings with gain accuracy of 0.5%. Buffered output allows part to be directly loaded by other circuitry. Differential inputs have 300 Ã-µV offset and can accept fully differential voltages up to supply. Able to withstand -48 V reverse battery condition, LT6100 uses separate...

Broadband Amplifiers suit EMC test applications.

With rated power outputs of 700 and 800 W, Models 700S1G4 and 800S1G3 operate from .8-4.2 GHz and .8-3 GHz respectively. Both have low levels of spurious signals, and are suited for use as driver amplifiers in testing wireless and communications components and subsystems. Each can be used as test instrument covering multiple frequency bands, and operates with variety of communication technologies...

Triple Video Amplifier facilitates RGB signal routing.

Suited for high-resolution video with multiple inputs or outputs, 2:1 multiplexing Model LT6555 features 650 MHz bandwidth, 2,200 V/Ã-µs slew rate, and 6.5 ns settling time. Multiplexers simplify selection of 2 video signals, while internal fixed gain of 2 amplifiers eliminates external gain setting resistors when driving 75 ohm back-terminated cables. Offered in 4 x 4 mm QFN and 24-pin SSOP...

Manufacturing 101 for Rubber Molding

Rubber molding is the process of converting uncured rubber into a stable final product.

RF Amplifier provides 1,000 W power.

Designed for 100 kHz to 250 MHz frequency range, Model 1000A250 provides RF power for applications such as RF susceptibility testing, antenna and component testing, and Watt meter calibration. In addition to remote control and remote status indicators, unit features gain control, internal/external automatic level control, pulse input capability, and RF output level protection. Internal RF...

Preamplifier features built-in, 20 Hz high-pass filter.

Featuring pre-polarized design, Model 426A10 is a Ã-½ in. preamplifier that operates from ICPÃ-® sensor power. Built-in filter minimizes unwanted low frequency sounds that may saturate analyzer. Unit terminates in BNC connector and uses standard coaxial cable. Operating temperature is -40 to +80Ã-

Measurement Amplifier optimizes press-fit accuracy.

Model MP85 facilitates 2-channel monitoring by checking 2 inter-related signals. Almost any sensor can be connected to amplifier, including strain gage sensors, inductive or incremental transmitters, and SSI transducers. Model MP85 uses algorithms for curve evaluation with max of 9 predefined windows for each curve, or 1 master curve with envelope as evaluation criteria. Digital I/Os save...

RF Power Amplifier Module offers dual-band capability.

Manufactured in 3 x 3 mm LCC package, RMPA2265 PowerEdge(TM) WCDMA/UMTS RF PAM supports 1850-1910 MHz and 1920-1980 MHz operation to address frequency flexibility and size requirements of mobile handsets, PDAs, and wireless PC data cards. Lead (Pb)-free unit complies with HSDPA standard and utilizes InGaP Heterojunction Bipolar Transistor technology. It has selectable high/low power modes and...

Current Sense Amplifier offers 1 microsecond response time.

With input voltage of 4-60 V, Model LTC6101 can withstand voltages up to 70 V, making it suited for automatic power shutdown under fault conditions. Unit extracts small differential signal from high common mode voltage, then amplifies and translates it into ground-referenced signal. Housed in SOT23 package, amplifier consumes 250 Ã-µA and operates from -40Ã-

Fixed Gain Differential Amps drive high-speed ADCs.

Manufactured in 16-lead, 3 x 3 x 0.8 mm QFN package, LT1993 fully differential amplifier series is available with fixed gain options of 2 (6 dB), 4 (12 dB), and 10 (20 dB) over 700-900 MHz bandwidth. Products enable designers to directly drive ADCs while minimizing support circuitry. Along with adjustable output common mode voltage, amps feature built-in, user-adjustable filter and harmonic...

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.