HD Video Filter Amplifiers operate from single 3.3 V supply.
Consuming only 9.5 mA of quiescent current per channel, and featuring low-power shutdown mode at 12 Ã-µA, models MAX9652/MAX9653/MAX9654 suit applications in set-top boxes, A/V receivers, and portable equipment with HD outputs. Designed for YPbPr component-video signals, MAX9652/MAX9653 have fixed passband for HD video, while passband of MAX9654 is logic selectable between SD and HD. HD...
Read More »Laser Amplifier delivers over 3.5 mJ pulse energy at 1 kHz.
Available in choice of either less than 50 or 100 fsec pulse width models, Libra(TM) HE one-box ultrafast Ti:Sapphire amplifier is offered with standard pulse repetition rate of either 1 or 5 kHz at 800 nm. Utilizing E-2 Engine(TM) regenerative amplifier design, unit offers beam quality with M2 less than 1.3, and output stability of less than 0.5% rms. Unit is suited for power-heavy applications...
Read More »RF Modules optimizes space, functionality in mobile devices.
TRIUMF (TriQuint Unified Mobile Front-end) Module(TM) series streamlines RF footprint for mobile device manufacturers designing next-generation 3G/4G products by combining GSM/GPRS/EDGE and WCDMA/HSPA/LTE transmit functionality. Used in place of multiple discrete modules to conserve board space, modules support 3G and 4G Long Term Evolution (LTE) standards and feature Quad Band...
Read More »GPS LNA Module features integrated SAW filter.
Designed for use in GPS receivers, Model RF2815 integrates low noise amplifier with low noise figure of 0.85 dB, surface acoustic wave filter, and supporting components in 3.3 x 2.1 x 1.0 mm, RoHS-compliant module. Unit features 13.5 dB gain, +8 dBm IIP3, and CMOS-compatible shutdown mode. Current consumption is tunable via single resistor. With both cellular- and PCS-band rejection...
Read More »
Pressure Sensor Selection Guide
This white paper provides information and a guideline for pressure sensor selection.
Read More »
Transimpedance Amps have multi-channel architecture.
Programmable gain transimpedance amplifiers, MTI04E and MTI08, feature circuits designed for processing signals from sensors with multiple current outputs. Sensitivity and dynamic range enable use with photodiodes in array or row sensors that operate in low-light environments or those with extreme intensity/color changes. While MTI04E integrates 3 functional channels for processing signals from...
Read More »Transimpedance Amplifiers suit sensors that output currents.
Operating at 3-5 V, MTI08 amplifiers feature 8 channels that can be individually programmed via SPI interface, with 8 amplification stages ranging from 200 kW to 25.6 MW. They also provide MUX after output and power-down mode. Lowest input is 20 nA using highest amplification stage, with signal frequency of 19 kHz/22 kHz, and lowest stage at 387 kHz/563 kHz with input current of 2.56 Ã-µA....
Read More »Video Distribution Splitter/Amplifier supports HDMI 1.3.
Model AT-HD-V12 can split any HDMI source into 2 outputs without signal loss. It allows digital video source with HDMI output, such as DVD, satellite, cable box, PC, Xbox, and PS3, to connect to 2 simultaneuous HD displays. Featuring single-link bandwidth of 349 MHz, device supports Dolby TrueHD (5.1/7.1/10.1 Ch) audio. Product suits in store video displays, education, and worship facility...
Read More »
Laser Amplifiers suit advanced scientific applications.
SpitfireÃ-® Pro XP ultrafast regenerative amplifier outputs less than 35 fs pulses at 4 W average power at 1, 5 or 10 kHz, while Solstice one-box ultrafast amplifier generates 3.5 W average power at 1, 5 or 10 kHz. Amplifiers are suited for advanced scientific applications, such as time-resolved spectroscopy, terahertz generation, coherence control, and high-harmonic generation.
Read More »GaAs pHEMT Amps offer multiple performance ranges.
Die-level GaAs pseudomorphic heterojuction transistor (pHEMT) amplifier ICs SUF-7000/-8000/-8500/-9000 respectively cover 0.1-16 GHz, DC-12 GHz, DC-10 GHz, and DC-10 GHz frequency ranges. Available levels of P1dB performance are 13 or 15 dB; OIP3 ratings are either 27 or 28 dBm; and signal gains are 11, 12, or 19 dB, all at 10 GHz. Enabling flexibility for integration, products suit applications...
Read More »
Amplifier/Controller features 4-quadrant design.
Suited for variety of speed and positioning control applications, QC6210 Series operates across range of 7-24 Vac or 10-30 Vdc at up to 30 A. Open-frame amplifier offers adjustable current limits, loop gain, and independent ramp times for each direction, as well as multiple operating modes. Unit is suited for industrial vehicles, conveyors, machine tools, packaging machines, assembly machines,...
Read More »
SEALTITE® Fittings and Cord Grips Offer Longer Lasting Protection
Anamet Electrical's 316 Stainless steel SEALTITE® fittings and UL-listed cord grips protect sensitive wiring components from fluids, corrosive contaminations, bumps, and abrasions with a steel core and liquid tight conduit jacket. Check out this video to learn more.
Read More »
