Millimeter-Wave Amps provide broadband performance.
Available in 10 models covering 33-75 GHz bandwidths, LA Series features P1dB input powers as high as +11 dBm, noise figures as low as 7 dB, and gain options from 10-40 dB. Additional performance characteristics include input/output VSWR of 2.2:1 and gain flatness of Ã-
Read More »Power Amplifier Chip suits portable audio products.
Offered in 4 x 4 mm QFN16 package with 0.65 mm pad pitch, Model TS4997 delivers 1.2 W per channel of continuous average output power into 8 W loads. It operates on 2.7-5.5 V power supply, providing immunity to supply interference with 85 dB PSRR. Unit integrates analog 3D technology and 2-pin digital interface that controls 3D effect through independent gain adjustments. Signal-to-noise ratio is...
Read More »Electrograph Showcases Industry's Hottest New Technologies at InfoComm International 2007
HAUPPAUGE, N.Y., June 19 - Electrograph Systems, Inc. (InfoComm booth #6625), one of the nation's largest display technology distributors, today announced it is showcasing some of the industry's hottest new professional A/V products and technologies at the InfoComm International 2007 show June 19-21 in Anaheim, California. We have great relationships with our manufacturing partners, which is...
Read More »Linear Power Amplifier targets 3G cell phones.
Model AWT6388 is for CDMA450-based cell phones and wireless local loop applications that bring 3G voice and data communications to wide areas in emerging and developed countries. High power and -134 dBm/Hz receive band noise enable performance over extended coverage areas of wide area CDMA450 networks. At 4 x 4 x 1 mm, it is built using InGaP HBT technology and features low-power quiescent...
Read More »
Customized Silicone Technology: For Today's and Next Generation Electronic Applications
This white paper provides and in-depth overview into the customized silicone technology for electronic protection.
Read More »
High Side Current Sense Amp has 10 -µV offset, zero drift.
Supplied in 3 x 3 mm package, LTC6102 has max input offset voltage that allows for lower sense resistance without sacrificing resolution. Differential sense voltages are accepted up to 2 V, and 106 dB dynamic range allows unit to resolve micro-amps from amps of current. Topology allows designer to customize power consumption, 1 Ã-µs response time, and I/O impedance characteristics. While 4-60...
Read More »ANADIGICS Ships WCDMA PAs for Huawei's Music Optimized 3G Handset
ANADIGICS' AWT6279 PA Selected for Stylish, Feature-Rich U120 Mobile Phone WARREN, N.J., June 12 // -- ANADIGICS, Inc. (NASDAQ:ANAD) today announced that they are shipping production volumes of ANADIGICS AWT6279 High-Efficiency-at-Low-Power (HELP3(TM)) wideband CDMA (WCDMA) power amplifiers to Huawei Technologies Co., Ltd. for its U120 music optimized 3G handset. The stylish, feature-rich U120 is...
Read More »GDA Collaborates with AMD to Develop Home Cinema Design
Innovative Home Entertainment Device Design Speeds Time to Market SAN JOSE, Calif., May 9, 2007 - GDA Technologies Inc., a leading Electronic Design Services (EDS) and Silicon Intellectual Property (SIP) solution provider for embedded, networking, and consumer electronics markets, today announced its successful collaboration with AMD to create a new reference design that OEMs can leverage to...
Read More »Post Amplifier is designed for fiber optic transceivers.
Model SY88973BL low-power limiting post amplifier offers multi-rate capability from 622 Mbps up to 3.2 Gbps operation. It incorporates low loss-of-signal, open-collector TTL output with external 4.75-10k micron pull-up resistor, and also features internal 50 micron data input and low-noise 50 micron CML data output. Available in 3 x 3 mm 16-pin MLFÃ-® package, device operates from single +3.3...
Read More »Amplifier is modular and stackable.
Offering dual duplex operation, ClearGain DD1900 Ground-Mounted Amplifier (GMA) incorporates fixed-gain, low-noise amplifier and high-performance filters. Without need for tower climbs, GMA improves signal quality by boosting uplink (RX) signal of mobile system. Amplifying full 1,900 MHz band, it consists of amplification module and power distribution unit, providing full compatibility with all...
Read More »Broadband Wireless Access Point supports up to 4 radios.
DOCSISÃ-®-based HyFi(TM) 1100 enables Cable Operators to leverage existing Hybrid Fiber Coax network to provide broadband wireless services for city-wide Hotzone and Municipal Wi-Fi applications. When deployed in concert with CASA software, network of installed HyFi 1100s will be able to be auto-discovered, remotely configured, and centrally managed. Solution supports up to 4 independent IEEE...
Read More »
Ensure Safety, Reliability in Your Cement Plant with Aerzen Blowers and Compressors
Aerzen offers blowers and compressors for challenging cement applications such as pneumatic conveying from raw mill to raw meal silos, combustion air, cement silos fluidization, and more. At Aerzen, safety is our top priority. Check out our video to learn more.
Read More »
