New Adapters Products

Adapter Card enables communication with serial I/O.

Isolated adapter card, PCI-AC48, links RS-485 serial devices with industrial and personal computers using 33 MHz PCI bus. It enables RS-485 communication with Opto 22 serial-based I/O, including remote bricks for mistic(TM) I/O product family, as well as SNAP-B3000 serial brain. Product incorporates 2 RS-485 serial ports that provide communication in 2- or 4-wire mode, and software that allows...

Impedance Converter Kit permits use of probe with DMM.

Model CT3197 adapts High Voltage Oscilloscope Probe Model CT2982 for use with standard digital multimeter. Kit, comprised of BNC feed-through terminator and BNC-to-4 mm banana plug adapter, features DC-to-50 MHz bandwidth, 1 W max working power, and Ã-

Ethernet Adapter is offered for eserver pSeries-® systems.

Ethernet-SR PCI-X adapter, No. 5718, offers 10 Gigabit Ethernet PCI-X based server connections with throughput on standard, shortwave multimode optical cable. It supports distances to 33 m using 62.5 Ã-µm multimode fiber with 200 MHz km min modal bandwidth @ 850 nm or 300 m using 50 Ã-µm multimode fiber with 2,000 MHz km min modal bandwidth @ 850 nm. Product supports Etherchannel/802.3ad,...

Adapter connects flash drives to IDE port.

Available in single- and dual-drive versions, CFADPT7 allows users to connect 1 or 2 compact flash drives to any system with IDE port. It fits in 2.5 in. hard drive footprint to allow for retrofit of existing products. In addition to standard 44-pin, 2 mm IDE connector, CFADPT7 can also have 40-pin IDE connector. Unit accepts both type 1 and type 2 CF cards and works with DMA capable CF cards.

Increase Asset Uptime with Agile MRO

Optimize Your Plant Floor Operations With Tofino

USB to RS232 Adapter is USB bus powered.

Utilizing Cygnal's CP2101 USB to UART IC, Model ADP-232 helps users transition from RS-232 applications to standard USB 2.0. Designers can maintain desired RS-232 device and plug it into available USB port. Corresponding mounting holes are provided on PCM-2004 USB Hub/Controller to allow for mounting up to 4 ADP-232 devices, adding as many as 4 RS-232 ports to system.

Bridge provides USB-to-serial connectivity.

Supporting both self- and bus-powered modes, Model TUSB3410 allows connectivity between serial-based embedded applications and laptops or legacy-free PCs. It contains 8052 microcontroller unit with 16 kB RAM that can be loaded from host or external on-board memory via I2C bus. Fully compliant with USB Full Speed specifications, bridge supports data rate of 12 Mbps and can sustain 6 total...

Adapters and Crosses are suited for medical applications.

Without using sleeves, Upchurch ScientificÃ-® MicroTees, MicroCrosses, and MicroTightÃ-® Adapters are suited for direct connection of 1/32 in. and 360 Ã-µm OD tubing. Made of chemically resistant PEEK(TM) polymer, adapters provide true zero dead volume connections between 1/16 in. OD tubing and capillary tubing. MicroTees and MicroCrosses have .006 in. thru holes and swept volume as...

IP Phone Power Adapter is compatible with CISCO standard.

Model EPA3 Ethernet Power Adapter enables IP telephones to receive power from network supplying power over Ethernet. Incorporated 3-port switch makes it possible to deliver full network bandwidth to PC or laptop. Unit uses 802.3af standard or proprietary Cisco in-line power as input and delivers 12 V to standard dc power jack on IP phone. Adapter has power and connection status LEDs as well as...

PC Card Controller Module suits embedded computers.

Single-slot PCMCIA PC Card(TM) adapter is added to Xpand104(TM) line of modular PC/104 PCMCIA controller boards. Simple-to-use expansion card for adding Type I, II, or III PC Card functionality to embedded computer, board integrates XT/AT PC Card slot together with IntelÃ-® PCMCIA to ISA bus controller fully compatible with PCMCIA V2.1 and JEIDA V4.1 standards. Adapter requires single +5 V...

Copper XENPAK Module suits network/server markets.

Copper XENPAK module conforms to 10GBASE-CX4 specification for 10-Gigabit copper Ethernet and supports VSR parallel optics through one port. Integrated media detect circuit allows unit to sense if I/O cable is standard copper interconnect or one that requires power. Product supports XAUI to XENPAK MSA 3.0 to CX4 interface and delivers 10 Gbps Ethernet data rates over 15 m of copper cable....

3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership

At 3Sixty Mission Critical, we specialize in maintaining the performance and uptime of our customer's mission-critical applications. Our services are comprehensive and designed to take on the entire burden of maintenance. Our "UPS as a service" is just another example of how we develop out of the box solutions to help our customers operate more efficiently; see our video to earn more.