Accelerometers

MEMS Shock Accelerometers measure high g-shock events.
Motion Sensors / Detectors / Transducers

MEMS Shock Accelerometers measure high g-shock events.

Offered in packaged and OEM configurations, PCB® Series 3991/3501 are capable of measuring long duration transient motion, as well as responding to and surviving fast rise times typical of high-g shock events. Measuring 2.5 x 1.7 x 0.9 mm, DC response acceleration sensors incorporate seismic mass, protective over range stops and full active, piezoresistive Wheatstone bridge. Slight...

Read More »
MEMS Accelerometer features 0.75 mm thickness.
Accelerometers

MEMS Accelerometer features 0.75 mm thickness.

Model LIS302DLH 3-axis digital MEMS accelerometer is high-stability 16-bit device that measures 3 x 5 mm and 0.75 mm high. Unit's circuitry outputs acceleration measurements up to ±8 G in standard I2C/SPI serial format, allowing direct connection to system processor without external components. Featuring power saving mode, it wakes automatically when motion is detected. Unit is also...

Read More »
Triaxial Accelerometer is for submersible applications.
Accelerometers

Triaxial Accelerometer is for submersible applications.

Model 3243A is miniature triaxial 10 mV/g accelerometer that features 2-meter moisture sealed integral cable, which allows sensor to be used in damp and moist conditions. With weight of 2.5 g and vertical height of 0.28 in., sensor is suited for situations where vertical space is limited. Model 3243A has adhesive mount and contains 3 miniature quartz shear mode accelerometer elements mounted to...

Read More »
Miniature Triaxial Accelerometer weighs 0.8 g only.
Accelerometers

Miniature Triaxial Accelerometer weighs 0.8 g only.

Featuring sensitivities of 2, 5, and 10 mV/g, 3133A series are suited for shock and vibration testing in printed circuit boards, board-mounted components, and other miniature products. With operating temperature up to +300°F, low profile unit has height of 0.23 in. and comes with 3 ft integral cable terminating to 4-pin connector. Designed for adhesive mount, triaxial IEPE accelerometer can...

Read More »
Choosing the Right Material for Your Project
Sponsored

Choosing the Right Material for Your Project

When choosing an appropriate metal material, the range of options is so broad that selecting the correct material for your unique application can be challenging. Different metals have characteristics that can affect weldability, ductility, and formability. Our new eBook outlines the unique properties and applications of popular metals including: Stainless Steel Brass Aluminum Copper Titanium

Read More »
Triaxial Accelerometer includes IEEE 1451.4 TEDS.
Accelerometers

Triaxial Accelerometer includes IEEE 1451.4 TEDS.

Designed for modal analysis applications, 3273AT series features robust, laser welded titanium design that includes ceramic sensing elements coupled to ultra low noise JFET electronics. It has low end frequency response of -10% down to 0.31 Hz and is available in sensitivities of 10, 50, and 100 mV/g. Featuring hermetic seal, adhesive mount, and single 4-pin connector, this triaxial IEPE...

Read More »
Triaxial Accelerometers have measurement range of 10 kHz.
Accelerometers

Triaxial Accelerometers have measurement range of 10 kHz.

With operating temperature range from -54 to +163°C and temperature coefficient of less than 0.0125%/°F, Series 339A Triaxial ICP® accelerometers are suitable for powertrain testing, NVH, road load data acquisition, and durability testing in climatic chambers. They have built in low pass filter, and are available in stud and adhesive mounting configurations.

Read More »
Miniature Triaxial Accelerometer is hermetically sealed.
Accelerometers

Miniature Triaxial Accelerometer is hermetically sealed.

Weighing only 3 gm, Model 3023M27 has footprint of 0.36 x 0.36 in., sensitivity of 10 mV/g, and features 4-pin radial connector. Labels of axes X, Y, and Z are laser marked in large font size on 3 orthogonal faces aiding user in orienting sensor. Adhesive mount unit is suited for use in modal analysis, noise vibration and harshness (NVH), Environmental Stress Screening (ESS), and general purpose...

Read More »
Miniature IEPE Accelerometers weigh only 0.6 grams.
Force Sensors / Transducers

Miniature IEPE Accelerometers weigh only 0.6 grams.

Offering sensitivity of 1 mV/g, Models 3225M5 and 3225M7 ultra miniature sensors are designed for mounting in narrow spaces only slightly greater than 0.25 in. wide. They are adhesive mount and have 3-56 coaxial connector which mates with replaceable coaxial cable. Featuring titanium case, units are only 0.15 in. high and are suited for measurement of shock and vibration of very small lightweight...

Read More »
Motion Sensors / Detectors / Transducers

MEMS-Based Motion Sensor suits battery-operated devices.

Featuring absolute analog output, 3-axis Model LIS352AX operates with any supply voltage from 2.16-3.6 V. Internal regulated voltage makes measurements insensitive to typical variations in power-supply voltage that occur in battery-operated devices, such as mobile phones and other portable devices. Housed in 3 x 5 x 1 mm plastic package, sensor provides accurate output across full-scale range of...

Read More »
Accelerometers suit general purpose vibration applications.
Accelerometers

Accelerometers suit general purpose vibration applications.

Models 3255C and 3256C charge mode accelerometers are intended for general purpose vibration applications under high temperatures. They exhibit 15 pC/g sensitivity and feature robust, laser welded titanium construction that includes ceramic sensing element. Both are hermetically sealed, weigh only 10 grams, and have 10-32 mounting hole. Model 3255C has 10-32 radial connector and Model 3256C has a...

Read More »

All Topics