Accelerometers

High-Temp IEPE Accelerometer integrates 2-pole, low-pass filter.
Accelerometers

High-Temp IEPE Accelerometer integrates 2-pole, low-pass filter.

With 10 mV/g sensitivity, single-axis 27BLPF operates reliably up to +347°F and comes in teardrop-shaped, hermetically sealed, titanium housing that has side-exit M3 connector. Standard options include 27BLPF-10-02 and 27BLPF-10-10, which offer respective corner frequencies of 2 and 10 kHz. Supplied with 10 ft mating cable, adhesive-mounted sensor has 0.25 in. dia and weighs 0.8 g....

Read More »
Accelerometers

Integrated eCompass with Soft Gyro enhances smart devices.

Respectively supplied in 2 x 1 x 1.1 mm and 3 x 3 x 1.0 mm LGA packages, dc213 and dc312 single-chip eCompass solutions combine 3-axis accelerometer and 3-axis magnetometer. Products, which feature IÂ-²C interface and dedicated programmable interrupt, provide 9 DoF (Degree of Freedom) with soft gyroscope with MiraMEMS Xmotion™ software enabled. Pin-to-pin compatible with g-sensor series,...

Read More »
Personal Computers (PC)

Low-power Microcontroller Provides Superior Precision and the Highest Level of Security for Wellness Metric Measurements

Maxim Integrated to preview Wellness Platform at electronica 2014. San Jose, CA – Demonstrating its commitment to the wearables market, Maxim Integrated Products, Inc. (NASDAQ: MXIM) will preview its Wellness Platform at electronica 2014. The new Wellness Platform is a suite of design hardware and software, including the WASP/MAX32600 microcontroller unit (MCU), for wearable medical...

Read More »
General-Purpose Accelerometer features modular mounting system.
Accelerometers

General-Purpose Accelerometer features modular mounting system.

Threaded model 46A, available inÂ- 5 sensitivities from 10–1,000 mV/g, can be fitted into various mounting blocks (pods) with stud or adhesive mount. While hex and cube pods mount single-axis measurements, tri-hex pod, with slots for 3 sensors, let technicians test up to 3 sensitivities concurrently. For multi-axis testing, triaxial pod enables different sensitivities to be tested on...

Read More »
Signal Receivers

Seismic and Geodetic System monitors infrastructure.

Combining 220-channel GNSS receiver, broadband seismic recorder, and force-balance triaxial accelerometer, Trimble® SG160-09 SeismoGeodetic System provides real-time GNSS positioning and seismic data for earthquake early warning and volcano monitoring as well as infrastructure monitoring for buildings, bridges, dams, and other natural and manmade structures. System includes variable size,...

Read More »
MEMS Accelerometers measure both vibration and acceleration.
Accelerometers

MEMS Accelerometers measure both vibration and acceleration.

Suited for use within low-current applications consuming 2 mA with 5 V excitation, Model 1410 Accelerometers use clock frequency from 100 KHz to 1.0 MHz and produce pulse density output relative to acceleration. Variable capacitive accelerometers are available in 7 ranges from ±2 g to ±200 g, with sensitivities from 0.625 kHz/g (200 g range) to 62.5 kHz/g (2 g range). Hermetically...

Read More »
Accelerometers

Monolithic 3D Accelerometer uses WLP technology.

CombiningÂ-  3D IC sensor with Wafer Level Packaging, Model MXC400xXC enables mobile consumer devices such as phones, tablets, toys, and wearable devices. Thermal accelerometer technology uses thermal convection of heated gas molecules inside sealed cavity to sense acceleration or inclination. Measuring 1.2 x 1.7 mm, accelerometer provides 12-bit resolution on all 3 axes, programmable FSR of...

Read More »
Servo Accelerometers are suited for monitoring structural health.
Accelerometers

Servo Accelerometers are suited for monitoring structural health.

Single-axis SA-107LN, 2-axis SA-207LN, and 3-axis SA-307LN are powered by +12 to +15 Vdc and designed for use in seismic and low-level, low-frequency motion studies. Low noise electronics, used in conjunction with force balance principle, enable measurements in low frequency micro-G range. Each self-contained unit provides DSC-coupled zero output as well as AC-coupled zero output, which...

Read More »
Shock and Vibration Detector optimizes drilling productivity.
Force Sensors / Transducers

Shock and Vibration Detector optimizes drilling productivity.

Adding shock and vibration measurement capabilities to Tensor Directional Module, Directive™ System optimizes drilling penetration rates by enabling adjustments and corrections to be made based on real-time data. Real-time management of downhole vibrations also minimizes equipment damage, helping to avoid potential well-drilling delays. Operating at up to 175°C, system combines processor,...

Read More »
Brüel & Kjær Licences Fiboptic Accelerometers to Smart Fibres
Miscellaneous Controls

Brüel & Kjær Licences Fiboptic Accelerometers to Smart Fibres

Deal targets vibration measurements in harsh environments like the oil and gas industry DENMARK – BrÃ-¼el and Kjær has entered into an exclusive licensing agreement with UK Company, Smart Fibres to produce and sell fibre-optic acceleration sensors worldwide. Created in Brüel and Kjær's R&D laboratory, the SmartAccel-HF is a fibre-optic acceleration sensor suitable for...

Read More »

All Topics