Accelerometers

Kionix's Breakthrough 6-Axis Accel-Gyro Combo Sensors Provide Industry-Leading Low Power Consumption

ITHACA, N.Y. and KYOTO, Japan - Kionix, Inc., a leader in the design and manufacture of MEMS solutions, has announced the mass production of its KXG03 6-axis Accelerometer-Gyroscope combo and the unveiling of two new flagship 6-axis Accelerometer-Gyroscope combos: the KXG07 and the KXG08.Â-  Our new products represent a significant technological leap forward in reducing the power consumption...

Differential Charge Accelerometers monitor gas turbines.

DEPEW, NY- – IMI Sensors, manufacturer of industrial vibration monitoring instrumentation, announced the release of two new hazardous area approved, differential output charge accelerometers designed for use in high temperature applications.  IMI has developed these products for gas turbine monitoring, commissioning of nuclear power plants and machinery monitoring in high temperature...

Miniature IEPE Accelerometers suit HALT/HASS testing.

Offering sensitivity of 10 mV/g and 500 g shock limit, Models 3030B4G and 3030B5G feature frequency response of 2 Hz and 5 Hz, respectively. Units are constructed of stainless steel and are hermetically sealed for reliable operation in high humidity and dirty environments. Both incorporate 10-32 axial connector and adhesive mounting capabilities.

Miniature Triaxial Accelerometers support modal analysis.

Available in 3 sensitivities of 10, 50, and 100 mV/g, Series 3263A combines ceramic shear sensing elements and low-noise electronics in titanium housing. Units offer broad frequency response with 4-pin radial connector and internal 4-40 thread for stud mounting. Hermetically sealed for high-humidity and dirty environments, IEPE accelerometers are suited for automotive applications, including...

Comparing Casting Processes

This white paper compares and contrasts common casting processes.

Model 3224C low-profile (0.105 in.) charge mode accelerometer weighs 0.2 g and incorporates ceramic shear sensing element in laser-welded titanium housing. Standard 3 ft integral cable terminates to 10-32 jack and is designed to mate with several Dytran extension cables. With sensitivity of 0.6 pC/g, accelerometer is designed to adhesively mount in tight spaces and suits measurement of shock and...

Triaxial ICP Accelerometer is approved for hazardous areas.

DEPEW, NY- – IMI Sensors, manufacturer of industrial vibration monitoring instrumentation, announced the release of Model EX629A11A/006CC, a hazardous area-approved triaxial ICP® accelerometer with an integral coiled cable and choice of terminating connector. IMI has developed the sensor to be used in route-based predictive maintenance in hazardous environments in conjunction with a wide...

Data Acquisition System features bridge measurement tool.

Available for PULSE 20 data acquisition system, LAN-XI Module Type 3057 performs dynamic measurements with bridge-type accelerometers and pressure sensors. ModuleÂ- supports strain gauge bridges and adapts to support virtually any type of transducer. It contains built-in half-bridge and quarter-bridge completion as well as shunt calibration. Built-in bridge excitation supply can be configured...

Supplied in Nickel 625 housing with 2-pin mini-MIL side connector, Series 357C includes Models 357C71/EX357C71 with sensitivity of 10 pC/g, Models 357C72/EX357C72 with sensitivity of 50 pC/g, and Model 357C73 with 100 pC/g sensitivity. Differential charge accelerometers are electrically case-isolated devices suited for commissioning of nuclear power plants, condition monitoring of power...

Miniature Accelerometer suits ground vibration testing.

Offering 2.5 mV/g output over 2,000 g dynamic range along with low noise resolution of 0.001 grms, TEDS-enabled Model 352A57 supports satellite component ground vibration testing for sine, random, and shaker shock applications. Hermetically sealed unit is also suitable for low outgassing thermal vacuum chamber environments. In addition to shear mode ceramic element and ICPÂ-® internal...

High Frequency Accelerometer features integral magnet.

Ideal for Route-Based Vibration Monitoring DEPEW, NY- — IMI Sensors, manufacturer of industrial vibration monitoring instrumentation, announced the release of Model 607M123/YYYCC, a high frequency ICP® accelerometer with integral magnet and integral cable to be used in route-based measurements. Model 607M123/YYYCC is a configurable model with choice of cable length and connector type. ...

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.