Accelerometers

Miniature Triaxial Accelerometer suits modal analysis.
Accelerometers

Miniature Triaxial Accelerometer suits modal analysis.

Model 3023M30 contains 3 miniature quartz laminar shear mode accelerometer elements mounted orthogonally to single support to measure complete motion of point. Operating temperature is up to +325°F, and product has labels on X, Y and Z axes laser marked in large font size on 3 orthogonal faces, aiding user in orientation. Accelerometer features adhesive mount design, sensitivity of 10 mV/g,...

Read More »
Mouser Electronics First to Stock Freescale MMA7660FC Accelerometer
Accelerometers

Mouser Electronics First to Stock Freescale MMA7660FC Accelerometer

Sensor features 3-axis low-g I2C digital embedded intelligence Mansfield, Texas, USA - July 27, 2009 - Mouser Electronics, Inc., known for its rapid introduction of the newest products, today announced it is the first to stock Freescale Semiconductor's MMA7660FC, a 3-axis +/-1.5g I2C digital capacitive accelerometer with integrated embedded intelligence and reduced power consumption. The...

Read More »
Damped MEMS Accelerometer suits impact testing applications.
Accelerometers

Damped MEMS Accelerometer suits impact testing applications.

Featuring sensing elements housed within rugged, lightweight, aluminum and weighing 1.4 g, Model 7264G features full bridge with 2 fixed resistors to facilitate shunt calibration. In-built sensor delivers shock resistance of up to 10,000 G in any direction, with range of +2,000 G full scale. Full scale output is 400 mV with 10 Vdc excitation. With frequency response extending down to DC and...

Read More »
Accelerometers and Cables feature M12 style connectors.
Motion Sensors / Detectors / Transducers

Accelerometers and Cables feature M12 style connectors.

Providing acceleration range of 80 g, top-exit Model 786A-M12 and side-exit Model 787AM8-M12 offer +5% sensitivity tolerance, while side-exit Model 787BM8-M12 offers +10% sensitivity tolerance. Equipped with M8 mounting screws, 100 mV/g vibration sensors are suited for applications such as motors, pumps, fans, and compressors. Connector-cable assemblies come in IP67 rated versions for...

Read More »
Choosing the Right Material for Your Project
Sponsored

Choosing the Right Material for Your Project

When choosing an appropriate metal material, the range of options is so broad that selecting the correct material for your unique application can be challenging. Different metals have characteristics that can affect weldability, ductility, and formability. Our new eBook outlines the unique properties and applications of popular metals including: Stainless Steel Brass Aluminum Copper Titanium

Read More »
Piezoelectric Accelerometers enable through-hole mounting.
Accelerometers

Piezoelectric Accelerometers enable through-hole mounting.

Designed for shock and vibration measurement, PE accelerometers feature welded construction, have wide bandwidth greater than 15 kHz, and offer outputs from 5.6-20 pC/g with operating temperatures from -73 to +260°C. Model 7500A weighs 10 g and is available in 3 ranges; 7, 13, and 20 pC/g, while 7501A weighs 2.1 g and has titanium case that is available in 5.6 pC/g configuration. Each...

Read More »
IEPE Triaxial Accelerometer suits modal analysis applications.
Accelerometers

IEPE Triaxial Accelerometer suits modal analysis applications.

Model 3293A consists of 3 miniature ceramic shear mode accelerometer elements mounted to single support and welded into titanium housing. Unit features low end frequency response of ±10% down to 0.25 Hz, electrical noise floor of 0.0002 kHz, and sensitivity of 500 mV/g. Available with hermetic seal, 5-40 stud mount and single 4-pin connector, it weighs 8.8 g. Labels of axes X, Y and Z are...

Read More »
IEPE Accelerometers can withstand ±10,000 g overshock.
Force Sensors / Transducers

IEPE Accelerometers can withstand ±10,000 g overshock.

Designed for shock and vibration measurement, Models 7104A (Side Connector) and 7105A (Top Connector) measure less than 0.75 in. high and weigh less than 8.8 g. Stainless steel devices feature welded construction, bandwidth greater than > 12 kHz, and are offered in ranges ±50 to ±500 G with operating temperatures from -55°C to +125°C. Stud mounting and 10-32 connectors...

Read More »
Triaxial Accelerometer is designed for modal analysis.
Accelerometers

Triaxial Accelerometer is designed for modal analysis.

Along with 2-wire internal IEPE electronics, Model 3023A9 contains 3 miniature quartz laminar shear mode accelerometer elements mounted orthogonally to each other to single support and welded into titanium housing. Device mounts using 10-32 tapped hole in base, has sensitivity of 1 mV/g, single connector, is hermetically sealed, and weighs only 4 g. Labels of X, Y, and Z axes are laser marked in...

Read More »
Electrical Connectors

Six New Class I Division 2 (Zone 2) Accelerometers from Wilcoxon Research

Germantown, MD -- Wilcoxon Research, a Meggitt Group company and a leading supplier of quality vibration sensors and sensor networks, announces the release of six new Class I Division 2 (Zone 2) accelerometers. In addition to the vibration sensors, the company is also releasing three compatible cable-connector assemblies suitable for installation in a Class I Division 2 (Zone 2) environment....

Read More »
Ultra Miniature IEPE Accelerometer weighs 0.2 grams.
Accelerometers

Ultra Miniature IEPE Accelerometer weighs 0.2 grams.

Designed for shock and vibration measurements, Model 3224A3 has sensitivity of 5 mV/g and can operate at temperatures up to 300°F. Unit is laser welded in titanium housing, and features integrated electronics, adhesive mount, and planar shear, ceramic design. Suitable applications include environmental stress screening, PC board vibration measurements, product response, general purpose...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics