Honeywell Sensotec, Inc.

2080 Arlingate Lane

Columbus, OH 43228

Strain Gage Amplifiers are adjustable over wide range.

Universal Series in-line strain gage transducer amplifiers have field selectable excitation voltage and wide adjustable gain range, making them suitable for transducers with sensitivities from 0.5-10 mV/V. Metal enclosure provides NEMA 4 or IP65 protection. Outputs include Ã-

Sensors, Monitors & Transducers

Pressure Sensor has two outputs.

Model DS pressure sensor provides RS485 or RS232 output capable of 380 readings/second and 0 to 5 Vdc analog output with frequency response rated to 1200 Hz. All-welded stainless steel construction is suited for factory floor or test cell installation. Model DS has combined accuracy of Ã-

Electrical Equipment & Systems

Load Cell is designed for low creep.

Model 48 pancake style load cells are traceable to NIST, making them suitable for use in metrology lab and as reference standard for calibrating other load cells. Tension/compression devices have accuracy to 0.02% in ranges from 250-100,000 lb. Options include 4-20 mA or Ã-

Sensors, Monitors & Transducers

Pressure Sensors offer true gage design.

Models TJE and STJE include second sensing diaphragm, mechanically linked to pressure sensing diaphragm, sealing electronic circuitry in hermetic chamber. Standard output is mV/V, with optional outputs of +/- 5 Vdc, +/- 10 Vdc, or 4-20 mA. Sensors are available in ranges from 0-1 psig to 0-60,000 psig. Model STJE delivers accuracy of 0.05% FS, with temperature errors of less than Ã-

Electrical Equipment & Systems

Load Cells measure up to 3,000,000 lb.

Compact MPB family of high capacity all-welded stainless steel compression load cells measure 1.0 to 14 in. high and from 1.25 to 10 in. dia, making them suitable for use in space restricted areas. Cells are available in ranges up to 3,000,000 lb. Optional high level outputs include 0 to 5 Vdc, 0 to 10 Vdc, and 4 to 20 mA. Accuracy is +/- 0.25% and operating temperature is from -65 to 250 deg F....

Sensors, Monitors & Transducers

Accelerometer offers frequency range from 0 to 2400 Hz.

Model JTF, with anodized-aluminum housing, provides overload protection to 20x range. It is available in 3 different mounting configurations: flat-pack rectangular unit mounts with 2 bolts; bolt-mount model has center through hole; and stud-mount utilizes tapped hole in base. Triaxial mounting block is available for flat-pack style to mount 3 accelerometers for sensing vibration in each of 3 axes.

Electrical Equipment & Systems

Load Cell offers ranges to 20,000 lbs.

Model 75a pancake-style, tension and compression type load cell provides +/-0.1% FS non-linearity and internal amplifier for voltage or current output. It has hermetically sealed, all welded stainless steel construction, providing resistance to side loads. Load cell features life cycle rating of approximately 10E+09 fully reversed cycles and standard operating temperature from 0 to 185 deg F. It...

Sensors, Monitors & Transducers

Torque Transducer mounts in-line to SAE or Metric flanges.

Non-contact, rotary Model RTC sensor transmits torque signal to RF receiver, delivering output of 0 to 10 V, proportional to torque, or optional 4 to 20 mA output. Operating range is 1,500 to 170,000 in.-lb, with running speeds up to 15,000 rpm, depending on range. RF telemetry package is induction-powered by stationary loop antenna coupled to power supply and receiver. Transmitter may be...

Electrical Equipment & Systems

Load Cell Calibrators perform duties on-site.

Portable, mechanical, pneumatic, and hydraulic load frames; calibration class load cells; load cell calibration software; instrumentation; and verification systems allow load cells to be routinely calibrated without sending them to calibration labs. Systems allow on-site checks and verifications to be carried out on load cells that have been moved or abnormally treated.

Sensors, Monitors & Transducers

Transducer Simulator utilizes wire-wound resistors.

Model TS simulates millivolt-per-volt output of unamplified strain gauge transducer. Input resistance is field-selectable to 350 or 5000 ohms. Output is selectable in 5 ranges of 0.5, 1, 2, 5, and 10 mV/V, and each can be adjusted in 10% steps to simulate output of various transducers. Portable unit is enclosed in weatherproof aluminum case and needs no power supply. It draws its excitation...