Honeywell Sensotec, Inc.
Columbus, OH 43228
Share:
Calibration Systems are IEEE 1451.4 compliant.
Plug, Play, and Calibrate Systems are compliant to IEEE 1451.4 standard for connectivity of sensors and associated signal conditioning. Transducer electronic data sheet containing sensor specifications, calibration data, and user-defined location information is stored in sensor. When connected to SC2000 or any IEEE 1451.4 compliant signal conditioning, sensor is interrogated for TEDS information...
Read More »
Wireless Transmitter works with bridge based sensors.
Model WTB battery-powered, wireless transmitter for use with Honeywell-Sensotec bridge based sensors simplifies testing, measurement, and automation by eliminating hookup of cables and sensing devices. Based on PWM technology, system features up to 1000 Hz frequency response for data transmission over line-of-sight distances up to 300 ft. Product operates in 900 MHz ISM radio band and does not...
Read More »
Accelerometers survive harsh environments.
Stainless steel MA Series test and measurement accelerometers withstand temperatures from 100-500Ã-
Read More »
Sensor Amplifiers are DIN rail mounted.
Sensor Amplifiers offer hi-level output signals, ready for long cable runs and/or direct interface to common PLC interface cards. They provide controlled power to associated sensor and condition sensor's return signal before providing it to output terminals. Relay buffered shunt calibration circuit offers simplified calibration, set-up, and real time circuit verification. Outputs include Ã-
Read More »
Software calibrates load cells.
Load Cell Calibration Software accepts output from both load cell under test and load being applied to cell. Upon completion of loading cycle, it calculates linearity and hysteresis and provides least squares fit and polynomial information on cell under test. Software works with excitation and signal conditioning equipment. Archiving and data storage functions allow information on previously...
Read More »
In-Line Load Cell works in compression and tension.
Fully welded and hermetically sealed Model RG has 50% overload capacity rating. Unit exhibits only .003 in. FS deflection and suits applications where side loading cannot be completely controlled. It is available for ranges from 2,000 to 50,000 lb and can be configured with integral male and/or female threads. Excitation up to 15 Vdc or Vac is acceptable and standard output is 2 mV/V. Combined...
Read More »
Weld-Thru Sensor provides force-triggered firing.
Model WEL weld-thru load cell combined with Model WGM Weldmeter allows control of electrode force at time of firing for spot and projection welds. System works equally well with differential air or hydraulic pressure sensors to provide consistent results.
Read More »
Tank Level Sensor measures virtually any depth.
Model LL-V vertical entry style submersible sensor may be suspended in open tank or attached to crown of enclosed tank to measure liquid level with 0.1% accuracy. Sensor has all-welded stainless steel construction, and welds are helium leak tested. Atmospherically vented oceanographic cable assembly exits through Ã-½-14 NPT threaded conduit connection. This allows mechanical or chemical...
Read More »
Displacement Sensors operate in sea water up to 10 years.
Model SSA (AC/AC) and Model SSD (DC) are submersible LVDT displacement sensors designed to operate in sea water at depths up to 7500 ft. They have all welded 316 stainless steel construction and waterproof cable and connector. Sensors are offered in ranges from Ã-
Read More »
Communication Module helps calibrate sensors.
SC2000 Signature Module communicator for pressure transducers, load cells, and torque sensors allows auto-calibration with Model SC digital indicator. Calibration information is stored in each sensor, including serial number, full scale range, units of measure, decimal point, and last calibration date. Upon power-up or command, Model SC interrogates sensor and automatically sets zero and span of...
Read More »