Seco Tools
Troy, MI 48083
Drill Crown chamfers and drills in one operation.
M-geometry crown, for CrownLoc(TM) drill system, is optimized for hard-to-drill materials and incorporates chamfer module that utilizes 2 inserts, each with 2 cutting edges. Heat generation is minimized via small edge preparation. Sharp cutting edges and conical front rake clearance reduce workpiece work hardening, while cutting geometry reduces residual stress and minimizes burrs at hole exit....
Read More »
Coated Turning Grade minimizes common wear patterns.
TP1000 cemented carbide grade features cobalt-enriched substrate with hard interior and wear-resistant surface. Negative and positive chipbreaker geometries are offered, including MF2, M3, M5, MR7, FF1, R4, F1, and F2, as well as wiper inserts in W-M3, W-MF2, and W-F1 geometry to handle roughing, medium roughing and finishing operations. TP100 machines steel in high production and batch...
Read More »
Coating provides 300% increase in tool life.
PVD Coating consists of thick layer of titanium aluminium nitride topped by thin layer of titanium nitride, offering wear resistance and low stress state. CP200 coated grade machines variety of stainless steels and powder metallurgical materials. CP500, with high cobalt micrograin substrate, is complemented by PVD coating for threading, grooving and turning high temperature alloys. CP600 has...
Read More »
Routing Cutter suits applications running to 10,000 rpm.
Suitable for slotting, square shoulder, and pocketing operations in aluminum, router cutter works with various insert nose radii. Available in cylindrical shank, shell mill, and Combimaster two-piece designs, routing cutter offers metal removal rate of 185 to 245 inÃ-³/min. and minimized runout of .0008 in. on master insert edge. Positive axial rake provides chip evacuation, and rake angle of...
Read More »
Milling Cutter is available in inch and metric sizes.
Helical Super Turbo(TM) milling cutter provides positive cutting rake angle for soft cutting action. Reduced runout due to tighter precision is attributed to fully-hardened steel cutter bodies. Cutter performs at high feed rates and offers center-lock screw holding system for reliability. Insert thickness reduces risk of pocket damage, and offers high metal removal. Optimized insert edge...
Read More »
Drill matches brazed drill precision.
CrownLoc(TM) allows users to drill different diameters using same drill body. It features precision-ground interface of interlocking V-grooves to ensure repeated positioning of each crown. Cutting edges are produced by injection-molding carbide substrate, producing homogenous tungsten carbide. Double coolant holes through each crown permit high volume of coolant to reach cutting edge. Crowns are...
Read More »
Toolholding System provides rigid, stable contact surface.
MDT(TM) uses single toolholder and insert for turning, profiling, and grooving in both axial and radial directions. For complex components with many grooves and profiles, one tool replaces several conventional tools for simplified tool handling and stocking requirements. It can handle wide variety of face machining operations and has PCBN inserts for tougher materials and small diameter boring...
Read More »
Face Cutters have hexagonal inserts.
Hexamill 220.66 is suitable for medium to heavy-duty face milling applications. Face milling cutters have strong, thick inserts with 6 cutting edges that enable feed rates in excess of 0.020 in/tooth. Also available are cassettes to accept inserts, and CM cutter body can be fitted with cassettes to cut at depths of more than 0.315 in. Cutter is available in both normal and close pitch versions....
Read More »
End Milling Cutter provides light depth of cut.
Nano Turbo is designed for small-diameter endmilling operations including slotting, ramping, rough- and finish-contouring, and plunging. It offers light to moderate depth of cut (.20 in. and under). Available in range of cutter sizes from .375 to 1.5 in. dia, Nano Turbo utilizes 2 to 10 inserts to provide high metal removal capability. Inserts feature large wiper flat for good surface finish.
Read More »Boring Bars include internal coolant capability.
Boring bars feature rigid carbide construction and brazed head connection. They allow for increased overhang (length-to-diameter ratio) over steel bars for demanding applications. Bars are designed for C-Lock screw down positive inserts which are available in wide range of Seco-Carboloy grade and groove combinations.
Read More »