Wheelabrator Group
Lagrange, GA 30240
Blast Machine features self-contained design.
Operating from 230 or 460 V, Smartline(TM) Basket Blaster is equipped with removable rotating load basket to tumble parts as they are being blasted from bottom of heat-treated steel basket. Basket is 20 in. dia x 27 in. long with max capacity of 224 lb. Machine also includes gravity reclaim system and integral bag type dust collector. Skewer system adaptation is available for low production...
Read More »
Hanger Machine cleans and prepares odd-shaped work pieces.
Self-contained Smartline(TM) Y Track Spinner Hanger Machine consists of blast cabinet built from welded steel frame with internal lining of Ã-¼ in. manganese steel plating on blast side and opposing wall. Vertical bucket elevator, driven by 1.5 hp gear motor, transfers abrasive media from lower hopper. Two trolley hangers, which can each handle loads of 1,100 lb, allow for one trolley to load...
Read More »
Bi-Directional Wheel offers direct-drive design.
EZ-FIT(TM) Wheel features cast 11-13%, Hadfield grade, manganese housing and integrated rear hub seal with labyrinth seal configuration to minimize abrasive leaking. Two-piece end liner allows for complete interchangeability as discharge end of liner wears. Optional pivot system can move wheel blast pattern from side to side in continuous or indexing motion and ultimately create multiple wheel...
Read More »
Corn Cob Dryer suitable for mass finished parts.
Walther TrowalÃ-® G Series of ground corn cob dryers heats ground cob with electric elements that are mounted in non-vibratory base. Vibratory motion moves parts through machine from load chute to separation screen. Model G 100 has net usable volume of 2.3 cu ft, drive power of 0.6 hp, and adjustable heating power of 4 hp. Dryers feature speed of 1800 rpm and use ratio of drying media to work...
Read More »
Water Cleaning System processes up to 80 gallons per hour.
Walther TrowalÃ-® ZM 01-ECO Centrifugal Effluent Cleaning System cleanses wastewaters of abrasives, metal fines, and oils after finishing process. Direct drive motor generates 2150 g's of centrifugal force to separate processed water from solid sludge. Electro-generatory brake averages stopping speed of 20 sec. Clean water discharges directly to vibrators and residual water is removed to mud...
Read More »
Vibratory Finishers process wide range of part sizes.
Direct drive Walther TrowalÃ-® DD Vibratory Finishers feature stress-free, annealed, flat bottom work bowl with wear-resistant cast polyurethane lining. Separation gate discharges parts and media onto 90Ã-
Read More »Airblast Room handles steel shot and grit applications.
For precision finishing of delicate surfaces and removal of rust and heat-treat scale, Vacu-BlastÃ-® walk-in system offers controlled processing environment for surface preparation. For use with ferrous and non-ferrous metallic and non-metallic abrasive blasting materials, system includes ventilation and lighting provisions, dust collection, UL- and CSA-approved relay logic system, and choice...
Read More »
Tumbler enables processing of small parts.
Barrel Blaster allows parts to tumble uniformly in abrasive blast for cleaning and surface preparation. It consists of one 13 in. dia, 8-bladed wheel unit, powered by one 15 hp, 3600 rpm, NEMA T-frame, direct mounted motor. Its 32 in. dia barrel is 37 in. deep, providing three cubic feet tumbling capacity for up to 600 lbs. Single slide gate and pneumatically operated butterfly valve allow for...
Read More »
Blaster cleans castings and forgings.
Super III Tumblast(TM) uses 15 in. bi-directional wheel with patented curved blades to provide batch cleaning of castings, forgings, and other metal working pieces. Its 14 cu ft work capacity makes it suitable for scale, rust, sand, and contaminant removal; preparing surfaces for coating, grinding or machining; and deflashing, deburring, and shot peening. Abrasive recycling system reclaims and...
Read More »
Blaster cleans castings and deflashes dies.
Wheelabrator(R)45 cu ft Super V Tumblast(TM) is suitable for castings, diecast deflashing, contaminant removal, peening, and surface finishing. Direct-drive 75 hp motors power two 15 in. bi-directional wheel assemblies. Cast-manganese housings have LongLyfe(R) cast liners for durability. Control panel has programmable electric controls or relay logic in NEMA 12 enclosure. Machine holds 45 cu ft...
Read More »