Diversified Technology, Inc.
Ridgeland, MS 39157
Share:
PICMG 2.16 Blade suits military/communications networks.
Compliant with PICMGÃ-® 2.16 standard, cPB-4610 Single Board Computer features 400 MHz Front Side Bus for use in Packet Switched Backplane platforms. PentiumÃ-® M cPCI Blade has single slot form factor and comes with 1 and 2 MB L2 cache, 855PM chipset, and 256 or 512 MB ECC DDR200/266 SDRAM memory. Processor speeds varies from 1.1-1.8 GHz depending on cache configuration. Product comes...
Read More »Single Board Computer is compliant with PICMG 2.16 standard.
Model cPB-4614 supports IntelÃ-®'s PentiumÃ-® M Processor family utilizing 855PM chipset with 400 MHz front side bus. Memory array based on two SO-DIMM sockets supports 256 MB to 2 GB with ECC protection. Board management is supported via PICMGÃ-® 2.9 compliant IPMI based satellite controller. Hot-swappable SBC includes one 10/100/1000 Mbps Ethernet port and one 10/100 Mbps Ethernet...
Read More »
Hub Board is PICMG 3.0/3.1 compliant.
Model ATS-1136 Switch Blade is an AdvancedTCAÃ-® hub board for Dual-StarFabric based ATCA shelf. It features 36 Gigabit Ethernet ports in 8U specification and switches base and fabric at Gigabyte Ethernet wire-speed. Unit offers two 10/100/1000 Gigabit Ethernet copper egress ports on front panel and three copper 10/100/1000 ports on rear panel. System management of temperatures and voltages...
Read More »
Rackmount Chassis suits applied computing applications.
Model CRM/FTS-2184 2U Chassis offers micro-floppy drive, micro-CDROM, two 3.5 in. internal drive bays, and 2 front 80 mm fans. Model CRM/FTS-4194 4U Chassis offers floppy drive, 3 front-accessible 5.25 in. drive bays, and 2 front 120 mm fans. Both heavy-duty steel units feature open architecture that supports PICMG SBCs and full-length I/O cards. USB port, power on/off switch, hard drive activity...
Read More »
Processor Blade supports AdvancedTCA platforms.
Suited for carrier-grade solutions, ATC-4130 is based on IntelÃ-® E7501 Chipset with 400 MHz front-side bus, utilizes 2.0 GHz LV Intel XeonÃ-® Processor, and is compliant with PICMGÃ-® 3.0/3.1 specifications for AdvancedTCA platforms. System memory of up to 4 GB is supported via 2 ECC-protected DDR SDRAM modules. Unit uses Pigeon Point's management architecture, and offers 10/100...
Read More »
Computer Module addresses deeply embedded markets.
Based on Embedded Technology Extended form factor, Model eTX-Lx05 provides core processing, memory, and I/O for application-specific base boards. It features IntelÃ-® PentiumÃ-® III or CeleronÃ-® low power processor, IntelÃ-® 815E chipset, and up to 512 MB PC100/133 SDRAM on single 144-pin SODIMM socket. Integrated 2D/3D AGP4X video controller is enhanced with 8 MB display cache...
Read More »SBC Computer supports PICMG 2.16 and 2.17 architectures.
Suited for communications market, cPS-8161 consists of one 8U cPCI PSB System platform used to build communications solutions. It supports 2.17 StarFabric architecture and up to 14 processor nodes in multiple configurations for high-density computing for switched fabric environment. Product also supports PICMG 2.16 Packet Switching Backplane and 2.5 Computer Telephony architectures with redundant...
Read More »
Single Board Computer is based on Pentium M processor.
Model LBC-9116 PICMG 1.0 Rev. 2.2 compliant passive backplane SBC features Intel Pentium M processor at 1.10 to 1.60 GHz with Advanced Power Management including Enhanced Intel SpeedStepÃ-® technology, dynamic frequency/voltage control, 1 MB full L2 cache, and Intel E7501 chipset with power-optimized 400 MHz front side bus. Graphics controller with concurrent, independent CRT and LVDS...
Read More »
Single Board Computer offers processing speed to 3.06 GHz.
Suited for embedded/applied computing applications, LBC-9017 offers Xeon NetBurst(TM) Micro-Architecture, Hyper-Threading technology, 533 MHz FSB, dual Gigabit Ethernet, and Ultra320 SCSI. Intel Xeon/Low Voltage Xeon processor-based PICMG 1.0 Rev. 2.2 compliant passive backplane SBC offers processing speeds of 2.0-3.06 GHz, with 512 Kbyte full core speed L2 cache, Intel E7501 chipset with 400/533...
Read More »
SBC hosts Ethernet PSB and StarFabric platforms.
cPB-4311 dual use compute blade provides 2.16-based Ethernet communications or 2.17 mesh communications as either host or node blade. Offerings include 700 MHz IntelÃ-® PentiumÃ-® III processor, up to 512 MB ECC SDRAM, two 10/100 Mbits/sec Ethernet auto-negotiating controllers, optional Ultra DMA/33 IDE hard drive, and 32-bit/33 MHz PMC site. StarGen SG2010 bridge provides links to dual...
Read More »