Milacron LLC
Suite 200
Cincinnati, OH 45242
Injection Molding Machines offer optional robot.
Five-axis SR Mate 100iB is available as integrated option on Roboshot SiB 55- and 110-ton machines. Part removal stroke of 0.5 sec/27.5 in. matches with Roboshot's clamp cycle of 1.6 sec and injection acceleration of 0-300 mm/sec in 27 ms. Robot offers payload capacity of 11 lb with extracting stroke of 20.4 in. for parts and 14.6 in. for runners, and lifting stroke of 27.5 in. for parts and...
Read More »
Injection Machines produce thin-wall precision parts.
Rated at 165 and 275 tons, all-electric Roboshot SiB Machines offer 17-385 tons clamp force. When equipped with 18 mm screw, Roboshot 165 can inject as little as 0.63 oz at over 35,550 psi with max velocity of 13 ips and rate of 5.1 in.Ã-³/sec. Equipped with 32 mm A barrel/screw combination, Roboshot 275 delivers shot size of 114 g with 39,816 psi pressure at max speed of 13 ips and rate of...
Read More »Injection Molding Machine facilitates changeover/setup.
Along with XTREEMÃ-® PC-based control system and multi-pump, digital hydraulics, vertical-insert Magna V combines digital positioning and overlapping functions with open-access, tiebar-less C-frame design. Injection unit sizes range from 0.7-54 oz. Offering clamp forces from 30-280 tons, unit can be equipped with stationary, shuttle, or rotary tables. Digital transducers, immune to EMI/RFI,...
Read More »IMM incorporates double turning-cube stack mold system.
Available in 40-450 metric ton sizes, K-TEC injection molding machines (IMMs) utilize FOBOHA's double turning-cube stack mold system, which has 3 parting lines that allow one IMM to mold 2 precision parts from 2 materials, label, and assemble finished product. By mounting secondary injection unit at 45Ã-
Read More »
Injection Molding Machine features 4,400 ton clamp force.
Metric Maxima 3900 has global, dual-platen design that occupies 18.5 x 54.8 ft footprint and offers optimized daylight area of 165.3 in. Unitized on injection and clamping base components, IMM design accommodates 2 injection units for co-injection or multi-material molding and utilizes single pancake cylinder for clamp tonnage. It features 607 oz. injection unit, 134 in. clamp stroke, 30 in./sec...
Read More »Metalworking Oil handles all metals and all operations.
CIMPERIALÃ-® 1070 multi-purpose soluble oil maintains control of bacteria and mold, is mild to skin, low foaming, and compatible with machine components and materials. Rust inhibitors combined with physical protection of oil prevent in-process corrosion on parts and components. Product is suited for turning, drilling, tapping, reaming, gear cutting, broaching, and grinding of steels, cast...
Read More »
Database Software helps optimize IMM processes.
Residing on servers operating on Windows 2000, NT, or XP, Mold 24i software utilizes Intranet/Internet for remote monitoring, data collection, and process analysis of up to 128 injection molding machines (IMMs). Product serves as master database for networked IMMs and provides charting capabilities to optimize process repeatability. Quality Radar uses 4-quadrant radar screen graphic that shows...
Read More »
Injection Molding Machine is offered in 1,125 ton version.
Powerline 1125 employs wide-platen configuration to accommodate multi-cavity molds and large parts, while 50 in./sec clamp speed and pre-inject capability reduce cycle times. With 2-stage injection unit with maximum shot of 220 oz, unit is available in 70 and 120 mm feedscrew diameters. Maximum injection pressure is 35,000 psi. Direct-connected, rack-and-pinion clamp drive has 31 in. stroke...
Read More »Injection Machines use barrier screws for melt uniformity.
Maxima two-platen injection machines are available in 6 sizes with clamp force rating of 2,750-7,820 kN. Wide-platen configurations accommodate molds that normally require tie-bar spacing of larger machines. With footprint of 6,588 x 2,251 x 2,300 mm, smallest machine accommodates molds weighing up to 3,762 kg with 650 mm thickness, with tie-bar spacing of 915 x 660 mm and clamp stroke of 1,060...
Read More »Twin Screw Extruders produce siding, fence, pipe, and profiles.
Series TP Parallel Extruders come in 4 models ranging from 93-172 mm diameter, with high-torque gearbox and up to 224 kW motor. Outputs are as high as 1800 kg/hr for rigid PVC profile and 2275 kg/hr for rigid PVC pipe or sheet. Integrated Crammer Feeder with torque based speed control ensures complete flooding of screws. Eisenbeiss Torque Master gear box delivers up to 96,130 Nm max torque.
Read More »