MODRoto
Saddle Brook, NJ 07663
Software Safe meets 1-hour UL Class 125 fire rating.
Rotationally molded from cross-linked polyethylene in seamless, insulated, double-wall design, MediaVault prevents electronic record contamination. Unit secures sensitive media from fire, water, heat, humidity, and theft. Gap between double walls is injected with fire retardant soda ash through molded-in openings, then compacted, sealed and covered with melted, spin welded polyethylene closures....
Read More »
Container permits transport/storage of wastewater chemicals.
Rotationally molded and seamless, UN/DOT-certified Unitote intermediate bulk container has all-plastic, polyethylene design that resists swelling and elongation due to chemical contact. Permits secure shipping and on-site storage of chemicals used in treatment of municipal and industrial water and wastewater. Container comes in 275- and 330-gal capacities, has 1.9 specific gravity rating, and...
Read More »
Airtight Bulk Container holds flavors and fragrances.
UN/DOT certified Unitote intermediate bulk container lets manufacturers safely ship natural, nature identical, synthetic, and mixed flavors in large volumes. Available in 275 and 330 gal capacities, IBC stacks 2 high when filled, 3 high when empty, and drains to less than 3 oz. All plastic, chemical resistant, polyethylene container accommodates hazardous materials with specific gravity ratings...
Read More »
IBC accommodates off-the-mark forklift entry.
HenHandler Intermediate Bulk Container (IBC) for food features polyethylene pallet base that may be removed and replaced (if necessary) to extend operational life of container. Rotationally molded in one piece, 4-way accessible base is attached to impact-resistant bin with four, one-piece, polyethylene bolts. IBC accommodates weights to 2,000 lbs., stacks two-high, and is available in 30 and 32...
Read More »
Indoor-Outdoor Globes provide impact-resistance.
Shatterproof, weatherproof, polyethylene globes are rotationally molded in single, seamless piece of uniform thickness and deliver even lighting distribution in anti-glare, UV-resistant design. They are UL-listed as suitable for wet locations on light posts and wall sconces. Globes are available in translucent finish with choice of 3 fitters: threaded (6, 7 1/2 in.); neck (6, 8, 10, 12 in.); and...
Read More »
All-Plastic IBC replaces steel cage units.
Heavy-duty OTP intermediate bulk container consists of seamless, reinforced, 1-piece container and base that permits secure shipping and storage of heavy weight products in all-plastic, anti-bulging, reusable design. Rotomolded of LLDPE, IBC holds more than 4,000 lbs. of product and stacks 2 high when filled or 3 high empty. Molded with 4-way lift access, container is offered in 275- and 330-gal...
Read More »
IBC prevents material from sticking to walls.
Hopper Bottom Intermediate Bulk Container features 30 deg angle, hopper-shaped bottom that promotes consistent flow and complete drainage. Seamless, UV- and chemical-resistant IBC is rotomolded from linear low density polyethylene, and includes 2 in. full port valve as either bottom or side discharge and 23 in. top with lever lock ring. Container is offered in 285 and 330 gal capacities measuring...
Read More »
Intermediate Bulk Container resists bulging without steel.
OTP-All-Plastic IBC can be used for shipping and storage of heavy products with specific gravity ratings up to 1.6, such as adhesives, sauces, gravies, paints, and coatings. Supported by reinforcing ribs, IBC resists bulging and ensures structural integrity without requiring steel frames or cages. Rotomolded of LLDPE, it accommodates 4-way lift access, stacks 2 high when full and 3 high when...
Read More »
Shipping Containers contain serial numbers.
Ship Shape(TM) UV-resistant, rotationally molded plastic shipping and storage containers have permanent, molded-in serial numbers, FDA/USDA codes, company logos, addresses, symbols and other graphics, letters and numbers. Color text and graphics may be molded-in in any language or in multiple languages and in any type size or font. Weatherproof text and graphics are impervious to water and...
Read More »
Bulk Container accommodates double blade mixers.
All-plastic intermediate bulk container accommodates double blade mixers for mixing multiple ingredients and raw materials. It enables food, chemical and other processors to mix and blend inside bulk container, eliminating need to mix in processing vessel and transfer to another container for shipping. It handles products with up to 1.5 specific gravity, stacks 2-high when full and 3-high when...
Read More »