Artesyn Communication Products, LLC
Madison, WI 53717
Share:
Mezzanine Card targets telecom infrastructure applications.
ProcessorPMC Card, Model PmPPC7447 combines 1 GHz Motorola PowerPC MPC7447A processor with Marvell Discovery III system controller. Processor features 32 KB on-die L1 instruction/data cache and 512 KB on-die L2 cache. Discovery controller gives processor high-speed accesses to up to 2 GB of external memory via 133 MHz Processor Bus. Consuming 18 W of power, Model PmPPC7447 includes 2 Gigabit...
Read More »Mezzanine Card adds processing power to telecom systems.
Pentium M-based AM7501 Advanced Mezzanine Card (AMC) provides hot swappability and integrated system management, which enable individual AMC modules to be remotely monitored, controlled, and replaced in field. Suited for use as control plane processor for optical and wireless infrastructure, card features server-class E7501 North Bridge, dual Gigabit Ethernet channels, and I2C-based Intelligent...
Read More »Mezzanine Card supports AdvancedTCA platforms.
Hot-swappable, Pentium M-based KosaiPM allows OEMs to add processing power to AdvancedTCA or proprietary systems equipped with AMC expansion bays. Optimized for embedded control, single-wide full-height card features 1.6 GHz processor with 400 MHz Front Side Bus, 1 Mbyte Level 2 cache, and SIMD extensions for compute-intensive applications. KosaiPM communicates with ATCA carrier cards via 2...
Read More »PCI Mezzanine Card suits telecom applications.
Optimized for distributed multiprocessing, PmPPC2750 Processor PMC card enables telecom OEMs to add processing power to systems equipped with PMC expansion sites. It features two 800 MHz IBM PowerPC PPC750FX processors, each with 512 kbytes of L2 cache; Marvell Discovery GT-64260B PCI bridge with 133 MHz Processor Bus; and up to 512 MBytes of shared SDRAM. Unit also provides two 10/100 BaseT...
Read More »
Point of Load Converters have power sequencing capabilities.
Compatible with Point-of-Load Alliance standard, PTH series non-isolated DC/DC converters provide means of addressing multiple power rail requirements of latest-generation boards. All 15 models are available in through-hole and surface-mount versions and offer output voltage adjustability, on/off inhibit function, and output over-current protection with automatic recovery. They are available with...
Read More »
DC/DC Converters meet needs of processor-equipped loads.
Typhoon(TM) isolated Ã-¼-brick converters include 1.2 V Model LQS100A48-1V2, offering full load efficiency of 84.5%, and 1.8 V Model LQS80A48-1V8 providing 89.7% efficiency at full load. Units operate from 48 V input over full 36-75 Vdc input voltage range, and offer adjustable output voltage from 110% down to 80% of nominal value. They include short circuit, over-voltage, and thermal...
Read More »
DC/DC Converters deliver VRM9.1 compliant CPU power management.
Models NXI100 and NXI150 non-isolated, point-of-load DC/DC converters power Intel's Xeon(TM) and Pentium 4 processors. They deliver up to 75 A continuous, 81 A peak at user-programmable voltage from 1.10-1.85 V using standard 5-bit VID codes. Both operate from nominal 12 V input. Multi-phase synchronous rectification techniques with interleaving achieve switching frequency of 1MHz. Converters...
Read More »
DC/DC Converters operate without heatsink.
Typhoon(TM) open-frame, single-board converters use synchronous rectification, and employ surface-mount components and planar, in-the-board transformer structures to limit height to 0.3 in. Single-output, 1/8 brick model offers 1.8 V output and delivers up to 40 A with 89% efficiency at full load. Dual-output, Ã-¼ brick models offer 3.3/1.2 V or 3.3/1.8 V independently regulated output...
Read More »
Point-of-Load Converter provides all-in-one power solution.
Dual-output, non-isolated, point-of-load (POL) converter for DDR (double data rate) memory, DDR12, enables 2.5 V VDDQ supply for DDR logic and 1.25 V DDR termination voltage (VTT) to be derived from single module. Unit employs synchronous rectification techniques and has 85% conversion efficiency when operated at half-load or greater. The 2.5 V VDDQ output delivers up to 25 A, and 1.25 V VTT...
Read More »
Converters provide 95% efficiency.
Non-isolated, point-of-load (POL), 10 A DC/DC Series SIL10, for use with 3.3 and 5.0 V on-board bus levels, employs synchronous-buck topology, using fixed-frequency switching and low on-resistance MOSFETs. Power density is 107 W/in3. Fixed-output converter provides 8 voltages from 0.8 to 3.3 V, and accommodates input voltage of 3.0 to 5.5 V. Wide-output trim model requires 4.5 to 5.5 V input....
Read More »