Cotronics Corporation
Brooklyn, NY 11232
Repair Epoxy provides 450
Bond-It(TM) 7056AL is filled with activated, aluminum metal creating fast-set, machinable, repair epoxy. With 1:1 mixing ratio, product is dispensed, mixed, and troweled on without running, dripping, or sagging. It cures at room temperature without objectionable or sulphur odors and hardens in 4-8 min. Bond-It 7056AL adheres to smooth, rough, or porous surfaces, including most plastics, metals,...
Read More »Adhesive/Casting Compound protects electrical feed thrus.
Based on cross-linked, inorganic-organic polymer system, Duralco(TM) 4701 consists of single-component adhesive and casting compound that requires no mixing or measuring. It may be used in temperatures to 600-
Read More »
Adhesive/Sealant seals exhaust ducts against corrosive chemicals and high heat
Resbond(TM) 907GF Adhesive and Sealant seals exhaust ducts against corrosive chemicals and high heat. It cures in 4-12 hr to form hard ceramic with resistance to chemicals, solvents, electricity, oxidizing, and reducing atmospheres. Curing time can be accelerated with mild heat. Packaged in 11 oz caulking cartridges, Resbond(TM) 907GF adheres to clean steel, stainless, iron, most metals,...
Read More »Thread Locker/Pipe Sealant suits temperatures to 500
Offered as alternative to anaerobic sealants, Resbond(TM) 507TS is non-corrosive; adheres to threads, studs, and pipes; and cures to form thermally stable and electrically insulating joints. Product prevents vibration loosening and leakage caused by shock and vibration in high-temperature applications. Preparation requires users to mix and apply, and product cures in 2-4 hr at room temperature....
Read More »
Machinable Liquid Metals repair, rebuild, and bond.
Durabond RK454 High Temperature Epoxy Putty cures in 24 hr at room temperature or 2 hr at 250-°F to form machinable material for use up to 500-°F. Durabond 7025, rated to 1,000-°F, is formulated with active aluminum metal for resistance to corrosion, erosion, chemicals, and solvents. It cures in 24 hr at room temperature or 2 hr at 250-°F. Durabond 7032 Stainless Steel-Ceramic composite is...
Read More »Instant Epoxy withstands temperatures up to 400
Bond-It(TM) 7056 adheres to smooth, rough, or porous surfaces, most plastics, metals, ceramics, glass, and wood and is suitable for joining dissimilar materials. It cures as fast as 4 min, with no fixtures or clamps, to form bond with tensile strength of 3,000 psi at room temperature. Product rebuilds surfaces and fills gaps measuring up to -¼ in. It has no sulphur like odors, volatiles, or...
Read More »Activated Epoxy bonds dissimilar materials.
Bond-It(TM) 7050 Activated Epoxy forms high-strength bonds to Nylon, PVC, most metals, high performance composites, glass, ceramics, and combinations of dissimilar materials. In most cases, no special surface preparations are required. Cured at room temperature for 400-
Read More »Epoxy forms bonds for continuous use to 400
Stress-free Duralco(TM) 125N forms flexible, electrically conductive bonds with moisture, chemical, and solvent resistance. Able to cure at room temperature, product exhibits flexural strength of 1,150 psi, 70 Shore D hardness, and compressive strength of 6,000 psi. With density of 2.7-3.0 gm/cc, epoxy requires no measuring and does not put forth any odor. Product bonds to glass, ceramics,...
Read More »Liquid Foam forms insulating parts.
Rescor 740 consists of ceramic powder and liquid activator. When mixed and poured into non-absorbent molds and hardened overnight, it produces corrosion resistant, machinable parts for use to 2300-
Read More »