Cotronics Corporation
Brooklyn, NY 11232
New Ceramic Tapes with Low Specific Heat and Thermal Conductivity
Made from asbestos-free, aluminum oxide based, high purity and refractory fibers. Wraps around pipes and equipment for thermal as well as electrical insulation to 2300ºF. Eliminates the time spent twisting, slipping and unwrapping that occurs with standard tapes.
Read More »
Thermeez™ 397PS Ceramic Tape meets OSHA and U.S. Coast Guard standards.
Thermeez™ 397PS Ceramic Tape is suitable for industrial, maintenance, research and production application such as insulating wires, thermocouples, induction coils, sensors, tongs and glass-handling equipment. Unit is made from industrial grade ceramic fibers that offer resistance against thermal shock, corrosive attack, mechanical vibration and stress. Product is offered in 1, 2 or 3 in. wide...
Read More »
Thread-Locker Gel eliminates running and dripping.
Available in 3 strengths, Resbond™ 907TSG provides high-temperature, thermally stable, electrically insulating, and chemical-resistant seals up to 2,100°F. ProductÂ- comes in Blue Standard for general purpose use, Red High Strength for vibrating applications, and Gold High Strength to fill large gap widths. Packaged in 4 oz applicator bottles, gel goes exactly where is is applied and...
Read More »
High-Temperature Adhesive bonds dissimilar materials.
Resistant to corrosion, chemicals, thermal shock, and electricity, Resbond™ S5H13 suits adhesive applications up to 500°F. Epoxy bonds heavy plastic to stainless steel; seals and insulates Bi-Polar, Electro-Cauterizers; and withstands thousands of steam sterilization cycles at 375°F. Adhering toÂ- metals, plastics, composites, glass, and ceramics, paste cures at room...
Read More »
Ceramic Adhesives support continuous use to 2,800°F.
Offering chemical and thermal shock resistance, Resbond™ 940 Customizable Series can be matched to physical properties of substrate for optimized adhesion to quartz, cordierite, fused silica, glassware, ceramics, and metals. Products cure in 4-8 hr at room temperature or in 5 min at 175°F. Applications include bonding, sealing, and insulating light bulbs, fixtures,Â- and sensors;...
Read More »
Thermal Insulation Ceramic Blankets have REACH-compliant design.
Available Â-¼, ½, 1, 1 ½, and 2 in. thicknesses, 370R blankets are made from alkaline earth silicate wool and designed for use in applications that require thermal insulation as well as compliance with strict safety requirements/regulations. Flexible blankets, thermally stable to 2,730°F, are resistant to chemicals as well as splashes of molten metal, oil, and water....
Read More »
Alumina Adhesive offers electronics protection up to 3,000°F.
Resbond(TM) 989 high-purity, alumina adhesive protects critical electronic components against moisture and humidity in temperatures up to 3,000Â-ºF. Applying to metals, glass, ceramics, graphite, and silicon carbide, it cures at room temperature, provides high bond strength, and is resistant to chemicals and solvents. Product has compressive strength of 3,000 psi and flexural strength of...
Read More »
Adhesives and Putties suit applications to 2,000F.
Designed to bond metals, ceramics, and dissimilar materials, Durabond(TM) Metallic Adhesives and Putties overcome brittle bonds obtained with ceramics and offer impact resistance associated with soldering and welding. Adhesives can be drilled, tapped, and machined, and do not contain epoxies or silicones. Inorganically bonded and chemically cured, VOC-free products are suitable for repairing and...
Read More »
Conductive Electrical Adhesive suits applications to 500°F.
Offering alternative to silver-filled, electrically conductive epoxies, nickel-filled Duralco 122 cures at room temperature in 16-24 hr at 75°F or can be fast cured in 10 min at 200°F. Resistant to moisture, chemicals, and solvents, 2-part epoxy bonds well to glass, ceramics, plastics, dissimilar materials, and metals, including steel, stainless, aluminum, and lead. It is suited for...
Read More »
Woven Ceramic Tape is backed with high-temperature adhesive.
Thermeez 397PS thermally insulating tape is woven from flexible industrial-grade ceramic fibers that are resistant to chemicals, thermal shock, corrosion, mechanical vibration, and stress. Product is non-irritating, non-toxic, and meets OSHA requirements as well as U.S. Coast Guard requirements for non-combustible material. It is available in rolls 1, 2, or 3 in. wide x 25 ft long. Adhesive...
Read More »
New Ceramic Tapes with Low Specific Heat and Thermal Conductivity
Made from asbestos-free, aluminum oxide based, high purity and refractory fibers. Wraps around pipes and equipment for thermal as well as electrical insulation to 2300ºF. Eliminates the time spent twisting, slipping and unwrapping that occurs with standard tapes.
Read More »
Thermeez™ 397PS Ceramic Tape meets OSHA and U.S. Coast Guard standards.
Thermeez™ 397PS Ceramic Tape is suitable for industrial, maintenance, research and production application such as insulating wires, thermocouples, induction coils, sensors, tongs and glass-handling equipment. Unit is made from industrial grade ceramic fibers that offer resistance against thermal shock, corrosive attack, mechanical vibration and stress. Product is offered in 1, 2 or 3 in. wide...
Read More »
Thread-Locker Gel eliminates running and dripping.
Available in 3 strengths, Resbond™ 907TSG provides high-temperature, thermally stable, electrically insulating, and chemical-resistant seals up to 2,100°F. ProductÂ- comes in Blue Standard for general purpose use, Red High Strength for vibrating applications, and Gold High Strength to fill large gap widths. Packaged in 4 oz applicator bottles, gel goes exactly where is is applied and...
Read More »
High-Temperature Adhesive bonds dissimilar materials.
Resistant to corrosion, chemicals, thermal shock, and electricity, Resbond™ S5H13 suits adhesive applications up to 500°F. Epoxy bonds heavy plastic to stainless steel; seals and insulates Bi-Polar, Electro-Cauterizers; and withstands thousands of steam sterilization cycles at 375°F. Adhering toÂ- metals, plastics, composites, glass, and ceramics, paste cures at room...
Read More »Cotronics' High Temperature Materials Instructional Handbook
Cotronics’ 16-page instructional handbook includes easy-to-follow guidelines for high temperature solutions that will satisfy the most difficult electrical, structural and industrial applications with the following proven Cotronics brand name products: Duralco™ (High Temperature Epoxies), Resbond™ (High Temperature Ceramic Adhesives), Rescor™ (Machinable and Castable Ceramics),...
Read More »
Ceramic Adhesives support continuous use to 2,800°F.
Offering chemical and thermal shock resistance, Resbond™ 940 Customizable Series can be matched to physical properties of substrate for optimized adhesion to quartz, cordierite, fused silica, glassware, ceramics, and metals. Products cure in 4-8 hr at room temperature or in 5 min at 175°F. Applications include bonding, sealing, and insulating light bulbs, fixtures,Â- and sensors;...
Read More »
Thermal Insulation Ceramic Blankets have REACH-compliant design.
Available Â-¼, ½, 1, 1 ½, and 2 in. thicknesses, 370R blankets are made from alkaline earth silicate wool and designed for use in applications that require thermal insulation as well as compliance with strict safety requirements/regulations. Flexible blankets, thermally stable to 2,730°F, are resistant to chemicals as well as splashes of molten metal, oil, and water....
Read More »
Alumina Adhesive offers electronics protection up to 3,000°F.
Resbond(TM) 989 high-purity, alumina adhesive protects critical electronic components against moisture and humidity in temperatures up to 3,000Â-ºF. Applying to metals, glass, ceramics, graphite, and silicon carbide, it cures at room temperature, provides high bond strength, and is resistant to chemicals and solvents. Product has compressive strength of 3,000 psi and flexural strength of...
Read More »
Adhesives and Putties suit applications to 2,000F.
Designed to bond metals, ceramics, and dissimilar materials, Durabond(TM) Metallic Adhesives and Putties overcome brittle bonds obtained with ceramics and offer impact resistance associated with soldering and welding. Adhesives can be drilled, tapped, and machined, and do not contain epoxies or silicones. Inorganically bonded and chemically cured, VOC-free products are suitable for repairing and...
Read More »
Conductive Electrical Adhesive suits applications to 500°F.
Offering alternative to silver-filled, electrically conductive epoxies, nickel-filled Duralco 122 cures at room temperature in 16-24 hr at 75°F or can be fast cured in 10 min at 200°F. Resistant to moisture, chemicals, and solvents, 2-part epoxy bonds well to glass, ceramics, plastics, dissimilar materials, and metals, including steel, stainless, aluminum, and lead. It is suited for...
Read More »