AntsSoft
Shanghai 201102 CHN
Share:
Magnetic Drive Pump has inert flow path and long life.
Model NH-PX brushless dc pump series has all inert pump housing and impeller, ceramic shaft and bearings, and wetted materials of glass filled polypropylene, PVDF, or ETFE. Pump offers life expectancy in excess of 10,000 maintenance-free hours. Maximum free flow is 30 lpm and maximum head pressure is 16 ft of water. Applications include plating tanks, temperature recirculators, ultrapure water...
Read More »Feedthrough Actuator provides motion control in vacuum.
Chamberlink, single-unit combination feedthrough and servo actuator, allows output shaft to operate in vacuum without shaft seals, preventing leaks. It is available in sizes 10, 14, and 32, with output torques from 10 to 300 in.-lb and output speeds of 10 to 50 rpm. Actuator is rated for vacuum levels of 10E-8 Torr.
Read More »Pneumatic Actuator works like human muscle.
Type MAS Fluidic Muscle uses material deformation and flexure to achieve linear motion. Basic concept involves wrapping flexible hose with non-elastic fibers arranged in rhomboidal fashion. This results in 3D grid pattern. When compressed air is introduced into system, grid pattern is deformed, pulling force is generated in axial direction, and muscle shortens. Range includes 10, 20 and 40 mm...
Read More »Micro Controller offers distributed processing.
FEC-FC34, with 10Base-T connectivity and TCP/IP protocol, provides local and remote process communication. It operates on 24 Vdc and has 12 inputs (user configurable as PNP or NPN) and 8 outputs. Two inputs can be used as high speed counters. 16-bit 20 MHz processor allows for multi-tasking of up to 64 programs. When connected to network, process/control information is available for enterprise...
Read More »Valve Manifold supports DeviceNet interface.
Direct Link Compact Performance Valve Manifold provides for 8 valve positions and is available in 10, 14 and 18mm port sizes. Voltage range of 11 to 28 Vdc is supported. Manifold can be populated with single or double solenoid 5/2- or double solenoid 5/3-way, and dual 3/2-way (normally open) or dual 3/2-way (normally closed), or combination of dual configurations. Type 10 manifold meets IP 65...
Read More »Miniature Valves meet IP 40 protection standards.
MH1 Miniature Valves feature 10mm grid design and are available for single sub-base, standard manifold, sub-D manifold, and PCB mounted manifold configurations. Series includes 10 lpm 3/2 direct-acting units, 3/2 normally open and normally closed, and 2/2 normally closed unit that provides 20 lpm flow for vacuum applications. Electrical connections include plug-in, horizontal or top connector....
Read More »Miniature Inductors are designed for surface mount uses.
SMI-1 Series consists of 13 parts having inductance values ranging from 10.0 Ã-µHy @ 1.00 amp to 220.0 Ã-µHy @ .42 amp. Tolerances for inductance values are 20% for 10.0 Ã-µHy to 47.0 Ã-µHy values and 10% for 56.0 Ã-µHy to 220.0 Ã-µHy values. With pads solder-masked to core, inductors can be IR or vapor phase soldered directly to printed circuit board. Inductors are...
Read More »Membrane Filter works on air and gases.
SteridyneÃ-® 0.2 Ã-µm PVDF hydrophobic filter is absolute-rated for sterile filtration of air and gases. It has broad chemical compatibility, and is suitable for filtration of pharmaceutical, biological, and aggressive process gases such as sterile tank venting, fermentation air, and compressed air and gases.
Read More »Network Processor plugs into OEM equipment.
IQ2200(TM) interfaces with PowerPC, MIPS, and other host processors to provide packet input, classification and order management, payload buffering, processor load balancing, lookup operation, output queuing, and discard management in multi-Gigabit Ethernet and OC-48 applications. It handles up to 600 Instructions Per Packet (XIPPs), MPLS switching, VPN processing, and complex Layer 7...
Read More »FRL Units are constructed of stainless steel.
Prep-AirÃ-® II units include filters, coalescing filters, regulators, piggybacks and lubricators. They are available in 2 basic body sizes: 3/8 in. body with 1/2 in. ports and miniature 1/8 in. body with 1/4 in. ports, with either NPT or BSPP threads. Individual units can be piped together using stainless steel pipe nipples. All units meet NACE specifications.
Read More »