Thermo Electron Corporation
Ecublens CH-1024 CHE
Share:
Electronic Grade Foams protect devices against shock.
Used as shock pads, spacers or snubbers, energy-absorbent CONFOR foams help protect hard disk drives, miniaturized computers, hand-held electronics and PDAs from shock and vibration, with no silicone off-gassing. Semi-open celled foams also provide acoustical insulation. CF-40E low-stiffness formulation and CF-45E medium stiffness formulation meet HF-1 of Underwriter's Laboratory's UL94 flame...
Read More »
Isolation Pads protect floors and reduce noise.
Series 400, 700 and 900 vibration control pads are offered in variety of configurations such as low frequency, high damping, high loading, level stability, and high coefficient of friction. Available from 2 to 25 mm thick with smooth or non-skid profiles, pads measure 500 x 1000 mm and handle up to 100 tons. They can be cut to fit special applications and combined with free-standing leveling...
Read More »
Metal Thread Inserts fit wood and composition board.
Three metal thread inserts install without need for special tools. Knife thread inserts, available with coarse and fine internal threads, furnish holding power in hard woods such as oak, maple, and mahogany. Finsert thread inserts provide strong metal threads in softer materials, and prevent splintering, splitting, and thread pullout. Hex Drive thread inserts are for soft materials such as pine,...
Read More »
Drum Liner keeps drums in service.
Thermo-formed, semi-rigid plastic insert keeps 55 gallon, open-head plastic drums clean and in constant use. After processing, mixing, shipping or storing, insert is removed and new one installed. Seamless, smooth insert cuts cleaning costs and reduces product and environmental contamination by capturing problem residues. Wall thicknesses are 15, 18 and 24 mils. Insert is suitable for follower...
Read More »
Cable-Tie Hook provides secure and removable mounting.
Type TDO self-clinching hook provides attachment points for mounting tie-bundled wires to electronic chassis or enclosures. It provides capability for users to temporarily remove wire bundle from mounting point. Hook installs in sheets from .040 to .125 in., uses no adhesives, which can fail over time, promotes EMI/RFI shielding, and reduces possibility of contamination by eliminating need for...
Read More »
Software facilitates development of vision applications.
ActiveX-based VisionPro provides flexible, graphical programming environment in which machine-vision applications are prototyped and developed. Software is available for frame grabbers and packaged systems requiring no PC. Each system has comprehensive library of vision software tools. It can be used by systems integrators, OEMs, and manufacturing engineers. Proof-of-concept stage to completed...
Read More »
Cord Fittings protect against liquids.
UL-listed Liquid Tight Fittings, with metric hubs, provide 35 lb of strain relief to cords, protecting from forces of push, pull, and flex. They provide IP 68 liquid-tight protection and include locknuts to secure fittings to chassis. Flexible pigtail extender prevents sharp bends and extends cable life. Straight-thru, pigtail, and right-angle styles are available. Sizes are M12, M16, M20, M25...
Read More »
Cord Grips connect and seal.
Tuff-Seal strain-relief cord connectors, liquid tight connectors and watertight conduit hubs are available in six different materials of construction: diecast zinc for residential and commercial applications; aluminum for general industrial facilities; nylon for environments with high moisture content; steel for durability in tough environments; valox for use in washdowns; and stainless steel,...
Read More »
EMT Fittings eliminate need for bending machine.
Flexible, strip-steel Flexel fittings, with zinc-plated steel ends, connect lengths of EMT together, and to panel boards and junction boxes. Hand-bendable fittings accommodate straight tubing, full 90 degree bend, and any position in between, including compound and offset configurations. Although rigid enough to maintain shape when installed, fittings isolate equipment vibration. Sizes are 1 1/4...
Read More »
LVDT Signal Conditioner operates without line power.
Low voltage LVC-2401 operates from 24 to 30 Vdc power, and is suitable for use in industrial applications where space and power sources are limited. It has user-selectable +/-7.5 Vdc and 4 to 20 mA outputs, LVDT excitation frequency of 2.5, 5 and 10 Hz, and works with any LVDT or RVDT. Unit operates over temperature range of 0 to +160Ã-
Read More »