C3D Labs
Moscow 127106 RUS
Share:
Frame Sensor detects parts passing through.
FRS and CAD frame sensors detect part passing thru or dwelling in detection area. Sensors with areas up to 200 x 250 mm can detect parts as small as 4 mm dia. Smaller sensors detect parts down to 2 mm dia. Sensing devices are enclosed in aluminum, industrial housing. Response time is 1 msec and outputs are NPN, PNP, normally open, and normally closed. Power requirement is 24Vdc. On board...
Read More »
Emissions Monitor processes data according to EPA regulations.
MicroCEM(TM) continuous emissions monitoring system comes in 2 compact, field-mountable weather-resistant NEMA 4X rated enclosures. It measures oxygen, carbon monoxide and NOx using paramagnetic, NDIR and chemiluminescent technologies. Built-in data acquisition and handling system (DAHS) stores relevant raw and diluent corrected emissions data, status information, calibrations and alarms for...
Read More »
Anti-Roll System is designed for company's cryostats.
Glass anti-roll system provides efficient and easy solution for cryomicrotomy. It consists of reusable metal frame and glass insert. All 4 edges of insert can be used. Back of metal frame is equipped with spacers to ensure optimum distance to knife holder for sectioning without manual adjustments. Existing CE and CN cryostat knifeholders, manufactured from 1996 can be upgraded.
Read More »
Oscilloscope Probe gets to hard-to-reach test points.
Microline 500 MHz bandwidth probes tests high-frequency applications. Measuring 5mm dia. and 65mm long, probes access miniaturized and multiple test points such as fine-pitch IC leads. Spring-loaded plunger allows probe to float while maintaining constant level of pressure on tip. It has input resistance of 10 Mohm, and is rated for use in CAT II, 300V and CAT I, 500V environments. Probe set...
Read More »
Urethane Hose transfers abrasive materials.
Clear, all-plastic UFD-AP hose and ducting has smooth interior to prevent material entrapment, bright, safety-yellow, plastic helix, and is flexible for making tight turns for material transfer. Puncture-resistant hose operates from -65 to 200 deg F. Sizes range from 1 1/2 to 8 in. ID, with 25 or 50 ft lengths. Applications include transferring stones, rocks, pellets, and scrap, and collecting...
Read More »Fine Powder suits high stretch applications.
POLYFLON(TM) F-107 high molecular weight homopolymer PTFE fine powder has same properties as PTFE, making it suited for both uniaxial and biaxial stretching. It provides dimensional stability, uniformity of color and translucency, and can be used to make extruded films and membranes such as tape wrap, dental floss, thread seal tape and dielectric film. Powder can also be used in filtration and...
Read More »
Power Supplies produce 40W outputs.
MKS40-Series high density enclosed switching power supplies accept universal input from 85-265 Vac and are available in 4 models that provide single outputs from 5 to 24 Vdc. All models have LED indicator, output adjustment potentiometer, 3,000 V isolation, over voltage and short circuit protection, and integral input line filtering. They operate over ambient temperature range of -10 to +60 deg C...
Read More »
Solid State Relays work in telecommunications.
Optically coupled SSRs are available in 4 models: HSR312, HSR412, HSR312L, and HSR412L. All consist of AlGaAs infrared LED optically coupled to photovoltaic generator that drives power MOSFET detector, and all have 4,000 Vrms isolation. HSR312 and HSR312L switch loads up to 250V, while HSR412 and HSR412L switch loads up to 400V. HSR312L and HSR412L employ active current limit circuitry that...
Read More »Printer Mechanism suits high-speed portable applications.
FTP-628MCL35x thermal printer and cutter measure 26.4 x 83.5 x 43.0 mm and weigh 120g, making them suitable for use in portable terminals, POS equipment, hand-held label printers, banking terminals, and portable measurement and medical equipment. Pair delivers 480 dotlines/sec output speed at 8 dot/mm resolution, accommodates 2 in. wide paper 60 to 100 micro-mm thick, and supports variety of...
Read More »
Focusing Fibers detect ultra-small targets.
Focused-beam fibers pipe light into otherwise inaccessible locations, and focus beam to very small spot, allowing fiber-optic sensors to detect small parts. Fibers come in fixed and adjustable sensing distance models. L4C6 and L4C20 convergent lens attachments allow sensing at fixed focal distances of 0.24 and 0.79 in., respectively, with spot dia. as small as 0.01 in. Other attachments include...
Read More »