Aaronia AG
Euscheid DEU
Share:
Turnkey System calibrates color of LED display panels.
With 14-bit dynamic range, PM-LED CCD-based colorimeter system performs color and luminance measurements and automatically corrects display control electronics based on said measurements to achieve desired results. Product consists of PM-1400 series CCD camera, control PC, and ProMetric 7.0 software for data acquisition, image processing, and instrument control. Product can be configured to...
Read More »
Gas Spring attaches to stock rails.
SL stock lifter gas spring with counterbore for rail attachments eliminates need for pins, bushings, or other devices to guide rails up and down as metal stock travels through die. Device attaches to stock rails and is available with stroke lengths from 25 to 210 mm. Force range is adjustable between 112-800 lb. Updated spring can be ordered with or without stock lifter cap.
Read More »
Label System provides more product information.
Seven-panel bottle label enables nutritional supplement manufacturers to provide detailed product information at point of sale. Top panel of ReseaLabels(TM) peels back to reveal information on reverse side. Four-panel insert is bound between top panel and bottom panel that adheres to product. Pages of label are turned like a book.
Read More »
Epoxy encapsulates microelectronic chips.
TRA-BOND 933-2 one component, electrically insulating epoxy encapsulant is for encapsulating microelectronic chips. Epoxy provides environmental and mechanical protection, exhibits longer work life and lower moisture sensitivity than anhydride-cured systems. Low coefficient of thernmal expansion minimizes stress effects on components and wiring during thermal shock tests.
Read More »
Plug-In Board offers 700 MHz Pentium III processor.
NI PCI-7041/6040E is for real-time measurement and control applications embedded in desktop computers. Processor provides loop rates up to 26 kHz and allows users to build integrated real-time applications that run independent of operating system. With 32 MB of non-volatile CompactFlash memory, board stores embedded software, user application and data, while RS-232 port communicates to peripheral...
Read More »VHF Power MOSFETs operate up to 175 Vdc.
Model ARF463 comes in common source TO-247 plastic package, and delivers 100 W of CW output power up to 100 MHz. Model ARF473 uses 2 die in Gemini ceramic-metal package for push-pull operation, and provides 300 W output up to 200 MHz. Model ARF520 has single die in standard .5 in. SOE package and delivers 150 W CW up to 150 MHz. Applications include RF Plasma generators at 13, 27 and 40 MHz, MRI...
Read More »S-Band Transistors cover applications from 2.7 to 3.4 GHz.
Series S-Band Transistors use Gold Topside metallization and Gold Wires. Model 2727-125 is rated with input power of 15.8 W to provide minimum power output of 125 W and power gain in excess of 9.0 dB.
Read More »
Solid Carbide Drills machine titanium and titanium alloys.
T-Geometry Solid Carbide Drills feature sharp cutting edges, large back taper, and optimized geometry, reducing workpiece deformation, excessive heat build-up, residual surface-hole stress, and creation of exit burrs. Units are offered as semi-standard in 3xD or 5xD with internal or external coolant. Diameter range is .187-.708 in. in increments of 0.004 in.
Read More »
PC card converts DC voltages for bus use.
Dual-function embedded PC card, PC/104-Plus Power Interface, converts DC voltages for output to PC/104 and PC/104-Plus buses, while also providing forced air circulation to embedded systems. Integrating onboard 3.3 Vdc regulator, interface generates +3.3 V for up to 6 A, from +5 Vdc and routes power through PC/104-Plus header for PC/104-Plus peripherals. Board also routes Ã-
Read More »
Excimer Laser extends gas and tube lifetimes.
OPTexPro(TM) 500 Hz excimer laser for refractive eye surgery and dermatology features air-cooling, solid state pulser, and stable energy discharge preionization. Portable laser is available at 157, 193, 248, 308, and 351 nm. Features such as internal energy monitor, and WindowsÃ-®-based software with automated maintenance routines make laser ideal for mask and wafer inspection, optics quality...
Read More »