Welding Equipment & Supplies

Fluid & Gas Flow Equipment, Mounting & Attaching Products, Welding Equipment & Supplies

Feeders, Indexers, and Accumulators are plug and play.

Mar 15, 2002

Glidepath(TM) system of assembly line feeders, indexers, and accumulators are suitable for automated introduction of components for industrial assembly processes. Systems include fall-away stop coupled to Sure Start nudger, which pushes conveyed unit on downstroke of stop without additional controls, thus eliminating additional operator intervention. Read More

Welding Equipment & Supplies

Weld Head provides high purity welding of micro-fittings.

Mar 13, 2002

UHP Mini-Micro(TM) Orbital Weld Head can be used to weld micro-fittings and tubing from 1/8 to 1/2 in. OD. Water-cooled design ensures long-term operation at 100% duty cycle with no damage to head. Unit features vise clamping tool steel jaws and narrow profile. Weld heads up to 6 in. OD are also available. Read More

Welding Equipment & Supplies

Weld Head offers scissors clamping mechanism.

Mar 12, 2002

Scissors-Lock Orbital Weld Head provides alignment for precision welding of tube up to 6 in. OD. It features heavy-duty construction, reliable arc starting, and efficient gas coverage for clean welds. Micro-weld heads down to 1/8 in. OD are also available. Read More

Welding Equipment & Supplies

Auxiliary/Trailing Shields redistribute inert gas.

Mar 08, 2002

GTAW/PAW Ultimate Shield gas auxiliary and trailing shields proportionally redistribute single source of inert gas coming into standard welding torch into multiple gas paths throughout shielding system, so no secondary source of gas is required. Outer gas streams, which surround primary gas emanating from welding torch, provide layers of protection from atmosphere. Users can attain pure silver... Read More

Electrical Equipment & Systems, Welding Equipment & Supplies

Inverter powers arc-welding systems.

Mar 06, 2002

Power-Master(R) 500P, with 560 A dc output, is suitable for most welding applications. 24 factory-preset pulse programs facilitate matching size and type of wire to pulse welding applications. Programs are available for mild steel, stainless steel, aluminum, nickel alloys, and silicon bronze. Inverter switches between weld processes, such as gas tungsten, shielded metal, gas metal, and pulsed gas... Read More

Fluid & Gas Flow Equipment, Welding Equipment & Supplies

Torch Tip reduces brazing time.

Mar 05, 2002

TurboTorch(R) Extreme(R), for use with air/acetylene in HVAC/R and plumbing applications, uses rotor to generate hot swirl, and reduces brazing time by as much as 40% compared to company's previous products. Field testing showed that operators experienced less wait times in joint brazing, and quickly adapted to tip's faster/hotter characteristics. Applications include high-volume OEM and... Read More

Materials & Material Processing, Welding Equipment & Supplies

Butane Torch provides as much power as 20-60 W electric unit.

Mar 05, 2002

Ultratorch Model UT-35 is an entry-level, butane-powered soldering iron, heat tool, and torch. It runs for 1 hr on full tank, and has fuel reservoir window to indicate butane level. Adjustable temperature control regulates power to tip. Iron-plated and corrosion-resistant preheat solder tips work as both soldering and flameless-heat tip. 1.6 mm chisel-type preheat tip and protective plastic cap... Read More

Fluid & Gas Flow Equipment, Welding Equipment & Supplies

Control Valves suit light industrial applications.

Feb 20, 2002

DKLO Series Control Valves offer Class IV shutoff up to 400 psig, and stainless steel trim. Single seat bronze model has union end connections and is available in 1/2 through 2 in. sizes. Single seat cast iron model with flanged connections is available in 2 1/2 through 4 in. sizes. Epoxy coated pneumatic actuator has multi-spring design. Live loaded V-ring packing assembly is self-adjusting,... Read More

Welding Equipment & Supplies

Weld Positioner allows accurate torch placement.

Feb 13, 2002

Circumferential weld positioner provides maximum versatility and productivity in welding various circular parts. Full length tracks, free-moving carriage, and torch tower permit positioning of weld torch where users need it. Capacity length is 240 in., capacity diameter is 36 in., and weight capacity is 500 lbs. Read More

Material Handling & Storage, Welding Equipment & Supplies

Welding Products include power sources, drives, and feeders.

Feb 12, 2002

CST(TM) 250 Stick/TIG power source provides 250 A for stick and TIG welding. CST Rack for multiple operators can hold up to 4 welding units. Bobcat(TM) 250 NT engine driven welding generator's rated output in CC/DC/AC mode is 250 A at 25 V, 100% duty cycle. 70 Series constant-speed wire feeders are available in bench-top, boom-mounted, and single- and dual-wire configurations. Read More

Fluid & Gas Flow Equipment, Welding Equipment & Supplies

Ball Valves and Actuators suit severe duty applications.

Feb 05, 2002

Trunion style ball valves and actuators are specifically designed for shut-off of liquid and gas flow up to 20,000 psi. Two 3-way and 3-way diverter ball valve configurations are available in orifices of .187 or .375 in. Valves incorporate 316 stainless steel construction, Viton 0-rings, Arlon ball seats and peek bearing washers. They have 1 1/16 in. dia hole for panel mounting. Air-operated... Read More

Safety & Security Equipment, Vision Systems, Welding Equipment & Supplies

Welding Lens is suited for low light conditions.

Jan 31, 2002

Speedglas(R) FlexView has 4.75 x 3.6 in. spring-mounted clear polycarbonate lens that flips up for weld preparation. Auto-darkening lens allows for grinding and cleaning, alignment of electrodes and inspection of newly completed welds, all with eye and face protection. It offers clear view combined with breathable, Speedglas 9000 CO2 reducing helmet. Lens meets ANSI Z87.1 industrial eye and face... Read More

Fluid & Gas Flow Equipment, Welding Equipment & Supplies

High-Pressure Valves provide positive leak-free shut-off.

Jan 30, 2002

Co-ax(R) valves are available for pressures up to 7,500 psi, actuation speeds of 30 msec, and in wide range of sizes, seal and construction materials. They handle high pressure applications, such as gas turbine fuel systems, cylinder filling, cryogenic pumps and vacuum furnace quench gas supply systems. Units come in 2/3- and 3/2-way versions, and in normally-opened or normally-closed... Read More

Welding Equipment & Supplies

Ultrasonic Welder is designed for thermoplastics industry.

Jan 14, 2002

Handheld Model H-540 40 kHz, 500 watt welder can be used for staking, inserting and spot welding applications. Microprocessor based programmable timer offers weld times from 0.1 to 9.9 sec. DB9 I/O connector is provided to interface with automated machines via PC or PLC. Autotune circuitry eliminates need to tune system when changing horns. Compact unit is suited for manual operations with low... Read More

Welding Equipment & Supplies

Welding System is available with OHV engine.

Jan 03, 2002

Ranger 250 Onan OHV can produce up to 275 A, 27V at 60% duty cycle in CV mode for Innershield and MIG welding. It provides 9,000 W of peak and 8,500 W of continuous ac generator power for tools, lights and plasma cutters. DC multi-process gasoline engine driven welder can be used for general purpose stick, pipe mode for stick welding, Touch Start TIG, cored-wire, MIG and arc gouging up to 3/16... Read More

Vision Systems, Welding Equipment & Supplies

Welding Lenses darken automatically.

Jan 02, 2002

Speedglas 9000 auto-darkening welding lenses have six different protection plate options. For welders using high-amperage processes, High Heat injection-molded protection plates withstand temperatures up to 365 ºF; HD outside protection plate offers additional resiliency to scratches and abuse; Passive Filters come in two shades, #1 and #2, and are used to extend shade range of Utility, 9000F... Read More

Material Handling & Storage, Welding Equipment & Supplies

Wire Feeder has microprocessor control.

Dec 18, 2001

DuraDrive4 has 4-roll drive system and grooved-and-driven upper and lower feed rolls to impart maximum feed force to wire. Feed motor handles various torch lengths and wire sizes. Adjustable burnback and run-in start allow operator to select slow start for difficult-to-start wires. Dual-speed switches from low to high-speed without gear or motor changes. Quick-disconnect feed rolls aid in wire... Read More

Welding Equipment & Supplies

Welding Power Source communicates via Ethernet.

Dec 11, 2001

Suitable for robotic applications, Power Wave 655R has Ethernet, ArcLink and DeviceNet protocols, giving user ability to monitor, control and troubleshoot from remote location. Its digital controls also can connect seamlessly to robot controllers and hard automation PLCs. Inverter has high amperage capabilities for high deposition requirements, Tandem MIG configurations, or heavy gauge materials... Read More

Welding Equipment & Supplies

Microscopic Welder repairs tools, dies, and molds.

Dec 07, 2001

PA-10/100 makes low temperature weld repairs under microscope. System includes power supply, small diameter weld wire, specialized welding torches, lighting, optics, and accessories. Applications include automatic welding of heat sensitive assemblies, wires, precision instruments, and small areas to be repaired without affecting adjacent material. Welder is available with computer controlled... Read More

Welding Equipment & Supplies

Self-Igniting Torch comes with adjustable flame control.

Dec 05, 2001

PREST-O-LITE® PZ-503 self-igniting torch is designed for use with either MAPP (mixture of methyl, acetylene, propane and propadiene), propane gas or FG-2. Torch lights instantly with push-button lighting feature. Constant on/off locking button keeps flame on or off continuously, allowing user to maintain stronger grip on handle. PZ-503's lightweight cast-aluminum body allows for handling and... Read More