AMETEK Technical Industrial Products
Harleysville, PA 19438
Nov 24, 2009 Rotron® brushless DC motors come in 47 and 64 frame sizes and accept voltage inputs of 12, 24, 37, 74, 90, and 110 Vdc. Applications include fans, blowers, pumps, and compressors from 0.5-2.25 hp. Series 47 Frame motors are available in lengths of 6.08 and 6.68 in. and achieve continuous torque up to 50 oz-in. and speeds up to 4,425 rpm, while 64 Frame series comes in 7.08, 10.125, 10.36, and 13.34 in. lengths and offers 800 oz-in. continuous torque and speeds up to 3,900 rpm.

AMETEK Technical Industrial Products
Harleysville, PA 19438
Nov 16, 2009 Available in 2.080, 2.552, and 3.025 in. lengths, 30 mm Pittman® Series 8540 achieves continuous torque up to 9.3 oz-in., peak torque up to 78.7 oz-in., speeds to 6,440 rpm at continuous torque, and continuous power up to 43 W, depending on model. DC motors integrate bonded neodymium magnets, 7-slot straight armature, diamond-turned commutator, and copper-graphite brushes. PC board brush card with integral surface mount components incorporates electrical noise suppression.

Applimotion, Inc.
Loomis, CA 95650
Nov 09, 2009 Covering 29-240 mm dia with thin radial length, UTS Series direct drive slotless motors suit direct drive positioning or high speed spindle applications. Frameless feature allows integration of unit into high speed spindles, operate with very low heating. Motors operate from industry standard brushless DC or brushless AC drivers from 12-300 V and can be wound for low speed or high speed applications.

Maxon Precision Motors
Fall River, MA 02720
Nov 06, 2009 Available with footprint of Ø25 x 84 mm, brushless EC 25 is designed for high speed applications of up to 70,000 rpm. Equipped with preloaded ball bearings and 2 pole Neodymium permanent magnet, unit is rated for nominal voltage of 36 Vdc and reaches nominal torque of up to 42.2 mNm, nominal speed 61,600 rpm. Motor-specific speed/torque gradient amounts to 44.9 rpm/mNm. Suitable applications include high speed spindle-driven applications in medical technology or machine tools.

Midwest Motion Products
Watertown, MN 55388
Nov 03, 2009 Accepting any 12 Vdc source, including battery power, Model MMP-D33-455B-12V GP81-308 requires just 21 A to generate full load torque. Unit features keyed output shaft measuring 19 mm dia x 40 mm long, and mounts via 4 face mount M6 threaded holes, equally spaced on 65 mm dia B.C. Rated IP54 for harsh environments, reversible gearmotor is suited for battery powered electric vehicles, robotics, and automation applications. Motor windings for 24, 36, 48, 60, 90 V are available.

Midwest Motion Products
Watertown, MN 55388
Jul 29, 2009 Measuring 2.24 in. dia x 7.75 in. long, MMP-TM55-24V GP57-317 reversible gearmotor has 12 mm dia x 25 mm long keyed output shaft and gearhead efficiency of 90%. Mounting is accomplished via 4 face mount M5 threaded holes, and variable-speed operation is supported. Able to generate up to 1,000 lb-in. peak, this IP54 gearmotor is available with 12, 36, 48, 60, and 90 V windings are available. Areas of use include battery-powered electric vehicles, robotics, and automation applications.

AMETEK Technical Industrial Products
Harleysville, PA 19438
Jul 24, 2009 Suited for commercial and light-industrial OEM applications, I Series motors are available in NEMA frame sizes 17, 23, 34, and 56 and in multiple lengths for each, offering performance capability from 40-1,700 W continuous. They can provide continuous stall torque from 1-58 lb-in. and peak torque from 3.1-174 lb-in., depending on model. Motors can be customized with gearing, optical encoders, holding brakes, cables, and unique features to meet specific application requirements.

Midwest Motion Products
Watertown, MN 55388
Jul 07, 2009 Accepting any 24 Vdc source, MMP-D22-376D-24V GPk52-046-LS measures 2.14 in. dia x 7.2 in. long and has keyed output shaft of ½ in. dia x 1.5 in. long. Mounting is accomplished with 4 face mount M5 threaded holes equally spaced on 40 mm dia BC. Output of this reversible gearmotor is rated for 50 lb-in. continuous torque at 110 rpm and 89 lb-in. peak. Requiring 4.3 A @ 24 Vdc to generate full load torque, IP54 rated product is available with 6 motor windings for 12-90 V.

ThinGap LLC
Ventura, CA 93003
Jun 17, 2009 With ability to deliver controllable high speed/high shaft power without gearbox, TG14010 brushless DC ring motor can be used for direct drive ducted-fan applications in unmanned aerial vehicles and hub-mounted motors for unmanned ground vehicles. Unit supplies 50 ft-lb peak torque from 3.7 in. length by 13.55 in. dia package that weighs only 23 lb. It conserves energy with gyroscopic effect that reduces vibration, and can be mounted inside wheel hub of vehicle propulsion systems.

Greenheck
Schofield, WI 54476 0410
May 28, 2009 Available in ¼, ½ and ¾ hp sizes, electronically commutated high-efficiency motor Vari-Green is capable of operating from 20-100%. Unit offers 3 different control options including 0-10 Vdc input wiring, motor-mounted dial, or wall-mounted dial.

Midwest Motion Products
Watertown, MN 55388
May 19, 2009 With full continuous output torque of 398 lb-in., Model MMP-TM55-36VGP57-308 consumes 2.1 A of current and delivers 13 rpm of continuous output speed. Reversible gearmotor measures 2.14 in. dia x 7.75 in. long and incorporates 12 mm dia x 25 mm long keyed output shaft. Unit mounts using 4 face-mount M5 threaded holes, equally spaced on 40 mm dia B.C. Motor windings for 12, 24, 48, 60, and 90 V are available for IP54-rated devices.

Bodine Electric Co.
Chicago, IL 60618 4798
May 12, 2009 Pacesetter(TM) 230/460 Vac, 3-phase gearmotors and motors suit factories where various power supply options are present. In addition to range of torque, speed, and horsepower ratings, these CE- and RoHS-compliant products offer Quintsulation(TM) 5-stage insulation system that protects motor from potential spikes or corona damage caused by inverter. Frame motors 34R and 42R, available with dual-voltage windings and inverter-duty ratings, can be matched with type E, F, and 5N gearheads.

Midwest Motion Products
Watertown, MN 55388
May 12, 2009 Accepting any 12 Vdc source, reversible model MMP-FM125-12V GRA-240 has rated output of 86 lb-in. continuous torque at 19 rpm and 100 lb-in. peak. Elements of construction include 2.5 in. dia motor with 3.2 x 2.2 in. gearbox and overall length of 8.15 in. as well as ¾ in. dia x 1.5 in. long keyed dual output shaft that exits both sides of gearbox. Hollow Shaft designs are also available, and support for variable-speed operation is standard.

Sauer-Danfoss
Ames, IA 50010
May 01, 2009 Designed to meet engine cooling requirements and improve operating efficiency in off-highway applications, SGM2Y and SGM3Y fan drive gear motors are, respectively, available with 8.4-25.2 cc and 22.1-44.1 cc displacements. Durability and performance features include cast iron rear cover, with integrated electrohydraulic proportional relief valve, on aluminum housing. Also, variable-speed proportional fan control promotes efficient, on-demand cooling and fuel economy.

Midwest Motion Products
Watertown, MN 55388
Apr 21, 2009 Measuring 2.14 in. dia x 7.7 in. long with 12 mm dia x 25 mm long keyed output shaft, MMP-TM55-24VGP52-236 reversible gearmotor accepts any 24 Vdc source and can produce 238 lb-in. continuous torque at 20 rpm (443 lb-in. peak). Lightweight (3.5 lb) solution, available with motor windings for 12, 36, 48, 60, and 90 V, is rated IP54 and accommodates variable speed controls. It suits battery-powered electric vehicles, robotics, and automation applications.

Baldor Electric Company
Fort Smith, AR 72901
Apr 13, 2009 Available with standard NEMA face/foot mount, BSM25C and BSM33C Motors range from ¼-3 hp. BMC Series controls, using standard 115/208/230 Vac, require no programming and provide tight speed regulation of better than 0.5%. Units use industry standard input command of ±10 Vdc or optional pot input for speed control. Housed in fully protected package, combination of BSM motor and BMC control is adjustable to cover speeds to 7,000 rpm with adjustable acceleration time of 0.1-30 sec.

Midwest Motion Products
Watertown, MN 55388
Apr 10, 2009 Accepting any 24 Vdc source, including battery power, Model MMP-TM55-24VGP52-04.3 measures 2.14 in. dia x 6.7 in. long, weighs 3.5 lb, and has keyed output shaft 12 mm in dia x 25 mm long. Device requires 3.6 A at 24 Vdc to generate full load torque, and motor windings for 12, 36, 48, 60 and 90 V are available. Reversible motor is rated IP54 for operation in harsh environments, and can be mounted with 4 face mount M5 threaded holes, equally spaced on 40 mm dia between center.

Sauer-Danfoss
Ames, IA 50010
Apr 06, 2009 Suited for heavy-duty fan drives and powering work functions, D Series cast iron gear motors provide 4,000 psi solution in ductile 3-piece housing with electrohydraulic proportional relief valve, which maximizes machine horsepower by providing cooling only as needed. Motors also incorporate high-temperature seals and dust-resistant shaft seal. Lined with Teflon® PTFE, bronze sleeve bushings in front flange provide optimized radial load capability before requiring use of outrigger bearings.

Midwest Motion Products
Watertown, MN 55388
Apr 01, 2009 Accepting any 36 Vdc power source, including battery power, Model MMP-TM55-36VGP52-308 measures 2.14 in. dia x 7.75 in. long and has keyed output shaft of 12 mm dia x 25 mm long. Output of this reversible gearmotor is rated for 308 lb-in. continuous torque at 13 rpm and 443 lb-in. peak. Requiring 2.1 A @ 36 Vdc to generate full load torque, 4 lb gearmotor helps extend battery life and produces minimal noise. Motor windings for 12, 24, 48, 60, and 90 V are available.

Bodine Electric Co.
Chicago, IL 60618 4798
Mar 16, 2009 Available in 24A and 33A frame motor sizes, 12 V PMDC Gearmotors and Motors can be built in combination with parallel shaft, hollow shaft, or right-angle gearheads with gearmotor output speeds from 5.6-660 rpm. Units range from 1/50-1/8 hp and can generate up to 310 lb-in. torque. Pulse-width-modulated Type WPM-12 Vdc Speed Control is suited for battery-powered, solar-powered, and other low-voltage applications that require basic, single-direction speed control.