NovaTorque, Inc.    Fremont, CA 94538
Jan 21, 2013 Offering 3 and 5 hp versions of both 2,400 rpm (3,600 rpm max) and 1,800 rpm models (2,700 rpm max), Gen2.0 PremiumPlus+™ Electronically Commutated Permanent Magnet (ECPM) motors utilize ferrite magnets in flux-focusing design. Motor-only rated point efficiencies are 93.0% and 92% for 3 and 5 hp versions, respectively; efficiency and torque are maintained over speed and load range. Driven by variable frequency drives, motors feature standard NEMA frame sizes and mounting dimensions.

CS Unitec, Inc.    Norwalk, CT 06850
Jan 11, 2013 As 20 A electric drill motor with 4-speed gearbox offering load speeds of 80, 130, 360, and 570 rpm, EAU 34/4 CB is designed for continuous use in driving machines for turning operations that require torque up to 203 lb-ft. Oilbath gearbox provides permanent lubrication, and control box includes on/off switch and switch for forward/reverse direction. Available in 120 and 220 V variants, 19.5 lb motor offers 1 ¾ in. dia max twist drilling capacity and 1 5/8 in. max tapping capacity.

Johnson Electric    New Territories   Hong Kong (prc)
Jan 10, 2013 Based on interior permanent magnet brushless motor technology, Flux Multiplier™ Drive Motor can support 12 kg wash loads and 6 ft³ drum sizes. Intelligent motor controller enables drive to deliver 30:1 spin-to-wash speed ratio for multiple wash modes. Energy savings exceed A+++ and Energy Start ratings.

Elmo Motion Control, Inc.    Westford, MA 01886
Jan 07, 2013 Gantry, The Elmo Way combines distributed motion control with servo tuning tools. System provides precise control with 2 servo drives that operate as one integrated unit and can be mounted anywhere. Eliminating need for dedicated motion controller or extra moving cables, design employs MIMO communications; one servo drive is configured as master, with second drive following its lead and sending feedback data. Software guides user through implementation in GUI format.

Nippon Pulse America, Inc.    Radford, VA 24141
Dec 13, 2012 Rated at 2.7 V, Model PFC10 features 1.0 mN-m holding torque, starting pulse rate of 960 pps, and 20 Ω resistance, while Model PFC20, rated at 8.9 V, provides 10 mN-m holding torque, starting pulse rate of 370 pps, and 100 Ω resistance. Both 2-phase, permanent magnet motors deliver 20 steps/revolution with step angle of 18°. Featuring thin stack design, Model PFC20T provides 4.4 mN-m of holding torque. Applications include valve control, fluid dispensing, gaming machines, and medical devices.

Siemens AG    Munich D-80333  Germany
Dec 03, 2012 Occupying minimal control cabinet space with its 22.5 mm width, Sirius 3RM1 is designed as direct-on-line starter and reversing starter with integrated overload protection for switching up to 3 kW motors. Semiconductor components are responsible for connection and disconnection operations, while relay system is used during operation. This combination extends service life and reduces maintenance. Available infeed system facilitates accelerated implementation of assemblies.

Midwest Motion Products    Watertown, MN 55388
Nov 30, 2012 Accepting any 24 Vdc source, IP54-rated Model MMP-D33-455D-24V GP81-029 measures 3.2 in. dia (max) x 9.25 in. long and has keyed output shaft of 19 mm dia x 40 mm long. Output of this 11 lb, fully reversible gearmotor is rated 136 lb-in. continuous at 138 rpm and 1,062 lb-in. peak. Motor windings for 12, 18, 28, 36, 42, 48, 60, and 90 V are available, and 14 A @ 24 Vdc is required to generate full-load torque. Areas of use include mobility equipment, robotics, and automation applications.

Precision Microdrives Limited    London SW9 6DE  United Kingdom
Nov 20, 2012 Sized to fit into handheld or body worn devices, 308-103 eccentric rotating mass (ERM) vibration motor is suited for use in vibration alerting applications where user may be wearing protective clothing. Product is built from high-torque, 3 Vdc motor, and size of eccentric mass creates maximum vibration amplitude; users benefit from high vibration amplitudes with relatively low vibration frequency. At 9.5 G, this sub-12 mm vibration motor is optimized for strength.

Applimotion, Inc.    Loomis, CA 95650
Nov 16, 2012 Intended for high-torque, low-speed, and low-profile applications, custom gearmotor assemblies consist of ULT, UTH, or UTS direct drive, frameless motors with appropriate gearing for project at hand. Precision bearings and high-resolution encoders are also included, and assemblies range in size from 25–800 mm dia; 150 mm dia, 150 mm unit can produce 50 nm continuous torque (150 nm peak). End-products can run with any traditional servo controller meeting power and communications demands.

Moog, Inc.    East Aurora, NY 14052
Nov 15, 2012 With commands in Class 5 SmartMotor firmware, material of changing width can be wound onto spool without gaps or unwanted overlap in wind pattern. Firmware offers both relative and absolute position control for setting traverse points, spool widths, dwell points, and more. Ability to dynamically phase-adjust incoming master signals enables real-time offsets for variations in material width without sacrificing positioning accuracy at traverse point.

Crouzet    San Diego, CA 92154
Nov 08, 2012 Supporting 12, 24, and 48 V power supplies, DCmind Brush Series includes 15, 25, and 55 W models with 42 mm diameter, and 55 and 104 W motors with 63 mm diameter. Units are available with rear brake and optical or Hall-effect encoders with 1 or 2 channels. Operating at noise level of 35 db, motors provide more than 80% efficiency and minimum service life of 5,000 hr when used with normal power loads. Typical applications include medical equipment, office equipment, and household appliances.

Finish Thompson, Inc.    Erie, PA 16501
Oct 30, 2012 Featuring 12 V lithium-ion battery pack that provides fade-free power, industrial-strength S6 can pump up to 450 gal on one charge. Cordless design facilitates process of transferring fluids and eliminates need for electric outlet, while solid-state electronic control circuit monitors all aspects of motor and battery pack and ensures operational reliability as well as service longevity. Charging options include 115 or 230 Vac and, for mobile applications, 12 V automobile/truck port option.

AMETEK Floorcare & Specialty Motors    Kent, OH 44240
Oct 25, 2012 Providing 36% energy efficiency, 6.6 in. Two-Stage Vacuum Motors are designed with Eternity Brush, which extends average life span to more than 1,500 hours on line voltage, and, in many instances to 3,000+ hours in low-voltage applications. To protect bearings from grease wash out, motor design places bearings in clean dry area and relocates cooling fan. Design also includes labyrinth run-in seal for added protection.

Bodine Electric Company    Northfield, IL 60093
Oct 24, 2012 Integrating 34B brushless DC motor and gearhead with PWM speed control and optical encoder, INTEGRAmotor™ 34B4/FV-F Gearmotors operate from regulated 24 Vdc power supply while providing ¼ hp and up to 341 lb-in. continuous torque. Units are available in gear ratios from 5:1 to 180:1 and output speeds of 0.3–500 rpm. Integrated control accepts inputs from external motion controller or PLC, while enclosed 1024 PPR, 2-channel optical encoder provides closed loop feedback to external controller.

NUM Corp.    Naperville, IL 60563
Oct 05, 2012 Available in 75, 95, 126, and 155 mm frame sizes and 3 lengths, SHX and SPX feature embedded digital interface scheme that eliminates need for separate encoder cable. This enables CNC machine builders to use one drive-to-motor cable for each motion axis. Respectively, SHX and SPX models provide continuous torque outputs from 1.2–20 Nm and 1.4–23 Nm. Both series offer choice of single- or multi-turn digital encoders with medium, 20-bit resolution and ±60 arc sec accuracy.

KNF Neuberger, Inc.    Trenton, NJ 08691-1810
Sep 26, 2012 With outside diameter of 32 mm, Type BL30 is designed to fit within standard compressor housings. Unit can be supplied in 12 or 24 V versions configured as either 2-wire or 4-wire solutions. All provide protection against reverse polarity, over-voltage, and over-temperature. IP54-rated for protection against dirt, dust, oil, and/or splashing water, motor integrates with Type NF30 and NF60 pumps for liquid handling applications as well as Types NMP830 and NMP850 for gas handling.

AMETEK Floorcare & Specialty Motors    Kent, OH 44240
Sep 24, 2012 Available with both single- and 2-stage fan systems, Eternity Brush motors feature wet bearing protection system and fan diffuser designs that prevent failures from grease washout. These 120 and 230 V motors also employ curved brushes with life ratings from 1,460–3,075 hr that let users operate equipment until brushes are completely worn, signaling motor has reached end of its maximum life. Motors suit applications that require high volume air flow or operate continuously.

Lin Engineering    Santa Clara, CA 95054
Sep 24, 2012 Offered in 4 body lengths of 1.7, 2.4, 3.2, and 3.9 in., NEMA 17 Brushless DC Motors are capable of peak torque up to 82 oz-in., depending on stack size. Units are available with various modifications, including shaft modifications, special cabling and connectors, spur and planetary gearboxes, and optical encoders. Motors are suitable for users that prefer velocity control with analog input and do not need holding torque.

API Portescap U.S. Inc.    West Chester, PA 19382
Sep 10, 2012 Weighing 0.47 oz, Athlonix(TM) 12GS Motors feature coreless design with self-supporting coil and magnetic circuit to maximize power density and provide energy efficiency approaching 80%. Units are available with 3 winding options to suit varied application needs. Providing maximum continuous torque up to 1.5 mNm, RoHS-compliant motors are suited for life science and medical applications, including fluid handling machines, insulin pumps, and collimators.

Epec Engineered Technologies    New Bedford, MA 02740
Sep 06, 2012 Comprised of electronically commutated motors, EXR series enables energy-efficient residential ventilation. System powered by EXR50 in testing exceeded Energy Star® requirements of moving at least 2.8 ft³ per meter of air per Watt of electrical energy consumed by fan by more than 500%.