EXAIR Corporation
Cincinnati, OH 45249-1621
Nov 30, 2007 Featuring cast aluminum body and ergonomic composite rubber grip, Heavy Duty Safety Air Gun safely removes chips, dust, and other contaminants from products, machinery, and work surfaces. Unit uses 3/8 NPT compressed air inlet to maximize airflow available to Super Air Nozzle. Airflow cannot be blocked, which complies with OSHA standards. Providing reach for areas not easily accessible, aluminum extension pipes are available in lengths up to 72 in.

Norwalk Equipment Corp.
Norwalk, OH 44857
Nov 29, 2007 Designed for electric hot water heaters only, Sediment Suction Kit has 2 nozzles with adapter that fits both. Nozzles are inserted into bottom heater element port, while shop vacuum is hooked up to adapter to suck out sediment. Kit cleans up to 24 in. diameter tanks.

BEX, Inc.
Livonia, MI 48150 5031
Nov 09, 2007 Available with tips that provide flat V, solid stream, and full cone spray patterns, Air Atomizing Spray Nozzle uses 1 port for gas to atomize sprayed liquid and another for gas that drives cylinder, preventing contamination from cylinder lubricants. Unit can spray from ½-70 gal of fluid per hour. It can spray atomized liquid or liquid itself, continuously or in pulses. Each nozzle can be changed by itself, without interfering with operation of other nozzles.

EXAIR Corporation
Cincinnati, OH 45249-1621
Oct 08, 2007 Featuring split design that can be clamped around continuously moving material such as pipe, hose, cable, wire, and extruded shapes, stainless steel Super Air Wipe(TM) produces 360° airstream that can blow off, dry, clean, or cool material passing through center. Air velocity can be varied with instant on/off control, and additional shims can be installed if more blowoff force is required. Areas of use include food, chemical, and pharmaceutical applications.

Spraying Systems Co.
Wheaton, IL 60189
Aug 28, 2007 Constructed of Kynar® or polypropylene, FullJet® Nozzles offer chemical and corrosion resistance. Internal vane helps produce even, uniform full cone spray pattern and ensures complete and consistent coverage. Suited for cleaning and rinsing, nozzles offer capacities from 2.4-26.0 gpm and spray angles of 70, 90, and 120°. Compact design facilitates mounting and installation.

NozzTeq, Inc.
Dunedin, FL 34698
Aug 27, 2007 Concentrating its cleaning capabilities toward bottom, C-Ray employs manifold system that directs water to conduits for each individual jet in order to extend water flow through pipe. Constructed of stainless steel, nozzle is effective in pipe sizes from 15-60 in. Larger pipe sizes can be accommodated depending on Trucks volume.

Laser Research, Inc.
Charlotte, NC 28217
Aug 14, 2007 LRO CO2 Laser Nozzles, compatible with mechanical or sensor heads, feature ±10 µm orifice size accuracy to optimize cutting performance. Suitable replacements for Prima®, Laserdyne®, and other CO2 lasers, they can be supplied in 1.2, 1.5, and 2.0 mm orifice sizes. Nozzles can be machined from brass, copper, aluminum, and ceramic with straight and tapered tips from 0.375-0.96 in. long and thread sizes from ¼-5/8 in. Brass nozzle lock rings are optional.

Sono-Tek Corp.
Milton, NY 12547
Jul 25, 2007 Intended for food manufacturers, Universal Food Coater features 6 independently controlled, non-clogging ultrasonic atomizing nozzles, which enable complete 360° coverage of food target. Variable width, variable speed conveyor allows flexibility for testing independently and/or in-line with other manufacturing equipment. Coater can provide anti-microbial protection of baked goods, produce, dairy, and meat products, as well as application of nutriceuticals, herbal extracts, and natural flavors.

NozzTeq, Inc.
Dunedin, FL 34698
Jul 11, 2007 The Jaws Nozzle incorporates conduit system manufactured into head that allows jet pattern to extend farther down pipe, enabling efficient movement of debris, sand, rocks, and other heavy materials. While most effective in 6-24 in. pipe sizes, product can also be used on larger diameter sewer pipes. It last upwards of 7-15 years before new sewer nozzle head is required.

NozzTeq, Inc.
Dunedin, FL 34698
Jul 11, 2007 The Paikert Cutter, SB-110, is impact and drill sewer nozzle that can drill through up to 5,000 psi concrete and reinstate back to original pipe. This hydro torque sewer cleaning nozzle combines torque, impact, and drill motion for aggressive operation. Applications include stubborn sewer pipes and water or storm water pipes with turbuculation, roots, concrete, or hardened grease.

HASCO Hasenclever GmbH + Co KG
Ludenscheid D-58513  Germany
Jun 21, 2007 Model Z3145 Valve Shot nozzles are designed for processing polyolefins and styrene in shot weight range of 5-25 g. With nozzle front sealing diameter of 10 mm, body diameter of 16.5 mm, and finely scaled nozzle lengths of 80- 140 mm, it is possible to work with small cavity centers and reach difficult gating positions. Balanced filling of all cavities is achieved by simultaneous opening of valve pins after certain amount of pressure has built up.

Bete Fog Nozzle Inc.
Greenfield, MA 01302
May 24, 2007 MicroWhirl(TM) nozzles have design that provides atomization with spray characteristics of mist at low pressure and heavy fog at high pressure. Units include 70 micron polypropylene filter and Viton® O-ring seal, and offer cone-shaped fog spray pattern and flow rates of 0.009-0.151 gpm. Suited for turbine cooling, odor and dust control, humidification, scrubbing, and coating, they are available in 303 or 316 SS, with optional safety wire hole.

Thermacut Inc. USA
Claremont, NH 03743
May 01, 2007 TungstenEX® Nozzle is designed as direct replacement nozzle consumable for HPR® plasma cutting systems in 130, 200, and 260 A operations. It incorporates pure tungsten within nozzle orifice to optimize handling of extreme heat. When matched with SilverEX® Electrodes, consumable life is extended.

AR North America, Inc.
Fridley, MN 55432
Apr 09, 2007 Multi Head Turbo Nozzle, Model AL-4F, handles functions of 0°, 15°, soap, and turbo nozzle. To operate, user pushes head of nozzle toward gun, swivels to select function, and releases head to engage nozzle function. Available in 3.0, 3.5, 4.5, and 5.0 sizes, Model AL-4F handles pressures up to 3,200 psi.

Sloan Valve Company
Franklin Park, IL 60131
Mar 14, 2007 Designed to conserve water while maintaining consistent spray, AC-11 Series Act-O-Matic® showerheads feature self-cleaning action that eliminates clogging particles, such as sand, after each use. Cone-within-a-cone spray uses pressure-compensating flow control for full flow at low pressures. Suited for commercial applications such as hotel rooms, health club locker rooms, and multi- and single- family residences, all models come with fingertip water volume control.

Guardair Corporation
Chicopee, MA 01020
Mar 05, 2007 Lazer(TM) 600 Series fits in any size hand and is suited for all types of industrial cleaning applications. Curved, overmolded actuating lever with nonslip surface disperses force, reducing pressure points on user's hand to promote operator comfort and minimize fatigue. Along with integrated hanging hook that allows for intuitive storage and retrieval, series features comfort-grip design and meets OSHA 1910.242(b) regarding output pressure for safety.

ITW Rocol North America
Glenview, IL 60025
Jan 12, 2007 Attached to 2-pump Accu-Lube® applicator system, Accu-Lube® U Nozzles split lubricant into 3 ports, applying smooth coat directly to cutting edge. Units mix lubricant and air right at nozzle, not back at applicator, so there is no lag time and no dry cutting. Nozzles can help optimize tool life and minimize fluid consumption.

Guardair Corporation
Chicopee, MA 01020
Jan 05, 2007 Suited for industrial and construction cleaning, INFORCER(TM) series features insulated ergonomic grip with built-in hand-stop for comfortable, secure handling. It is available in aluminum or steel, and latter includes hardened chisel point nozzle for loosening debris. Extension lengths are offered from 24-72 in., and dead-man safety trigger allows for palm or finger activation. Venturi nozzle provides Force Fast(TM) cleaning power.

PHD, Inc.
Fort Wayne, IN 46899
Aug 22, 2006 Designed as drop-in replacements for nozzle cylinders used in Sidel® Series2 Heat Set machines, Series BCZ2D Cylinders promote service life and minimize maintenance/downtime in stretch blow mold machines. Bodies are made of 100% machined aluminum, and heavy-duty internal urethane shock pads absorb impact energy as well as eliminate metal-to-metal contact. Units come standard with FDA-approved lubrication. Optional manifold and valve combination is available.

C-Tech Industries
Camas, WA 98607
Aug 15, 2006 Attaching to wand of most hot or cold water pressure washers, Revolution Nozzle blasts surfaces with spinning spray action. Unit is rated for up to 4,350 psi at 185°F and spins at 4,000 rpm to provide cleaning action of wide-coverage, fan-spray nozzle along with deep-cleaning impact of pencil-jet or 0° nozzle. Revolution has wear-resistant ceramic head and bearing ring and is shrouded by housing protector.