Henkel Corporation    Rocky Hill, CT 06067
Nov 17, 2010 Designed to meet UL-674 requirements for explosion-proof motors, Loctite® E-40EXP(TM) maintains more than 85% of its compression strength following exposure to 13 harsh chemicals. Two-component compound is used to pot and seal wire conduits, isolating electric motor from hazardous vapors and chemicals that could cause explosion. Curing in approximately 2 hours at room temperature, material will not expand and experiences very little shrinkage, facilitating accurate dispensing.

Master Bond, Inc.    Hackensack, NJ 07601
Nov 12, 2010 Formulated for applications subject to temperature cycling, vibration, and mechanical shock, EP21TDCHT-LO withstands cryogenic temperatures and meets NASA low outgassing specifications. It offers 1:1 mix ratio by weight or volume and cures at room temperature or more rapidly at elevated temperatures. Properties include 4K to +350ºF service temperature range, shear strength exceeding 2,500 psi, peel strength of greater than 20 pli, and Shore D hardness of greater than 60.

Carboline Co.    St. Louis, MO 63144
Oct 14, 2010 Suited for galvanized steel and other non-ferrous metals, water-based Galoseal WB creates tenacious bond, which optimizes topcoat adhesion to galvanized metal surfaces. Low VOC formula accepts 2-component solvent-containing finishes such as epoxies and urethanes. Product contains no heavy metals or mineral acids and provides dry film thickness of 0.5-1.0 mils.

Daimer Industries Inc    Woburn, MA 01801
Sep 17, 2010 Employing compounds composed of bio-based ingredients, Eco-Green® Grout Sealers impart durable protective coat to grout lines common in indoor and outdoor tile surfaces. Soy-based products are chemically tested and engineered for biodegradability, often in less than 1 month. Formulas can be applied to grout lines on floors, ceilings, counters, walls, and backsplashes without fear of toxicity.

Daimer Industries Inc    Woburn, MA 01801
Sep 07, 2010 Using ingredients composed of soy-based compounds, Eco-Green® Grout Sealers preserve grout joints and repel stains and dirt in heavy traffic environments. Products add hard, protective coating to sanded grout lines found in exterior or interior tiling. Scientifically tested and designed to biodegrade rapidly and completely, often in 1 month's time, sealers are suitable for tiled ceiling, floors, walls, and counters in restaurant, janitorial, and food processing industries.

3M Co., Electronic Products Div.    Austin, TX 78726
Aug 16, 2010 General Use and Cold Weather Wireless Weatherproofing Kits, WK-100 and WK-101 respectively, help cellular operators protect connections at new or existing cellular site stations. Using self-fusing butyl mastic in conjunction with vinyl tapes, installers and line technicians can create weatherproof seal for resistance to environmental factors such as water, condensation, UV, and sunlight. Suited for temperatures down to 0°F, WK-101 also includes Scotch Super 33+ Vinyl Electrical Tape.

Solutia, Inc.    Saint Louis, MO 63166
Aug 11, 2010 IEC-certified, RoHS-approved, and UL-recognized, Saflex® PS41 PVB prevents corrosion in solar cells while also inhibiting discoloration. Product is specifically suited for protecting against metal migration and maintaining original aesthetics of solar modules in building integrated photovoltaics (BIPV) applications. Formula prevents electromigration when in contact with metals such as silver, nickel, and vanadium, which typically lead to discoloration.

Anti-Seize Technology Industries, Inc.    Franklin Park, IL 60131
Aug 03, 2010 Suited for straight metal threads up to 1 in. diameter, AST-SEAL HYD withstands hydraulic system pressures and exhibits resistance to water and non-polar solvents. AST-SEAL PH, designed to resist all hydraulic fluids and seal pneumatic/hydraulic systems, consists of thicker, non-running version of AST-SEAL HYD for overhead or inside machinery applications. Both are non-shredding and non-contaminating with temperature resistance of -60 to +350°F.

Hilti Inc.    Tulsa, OK 74121
Jul 26, 2010 Engineered for structural design and installation communities, Construction Grouts include Multipurpose and Precision Grouts, which meet ASTM C-1107 and CRD-C621 non-shrink standards, and 3-component Epoxy Grout, which is both VOC- and butyl glycidyl ether-free. Products are suitable for baseplate filling, bridge repair, doweling/rebar, machine pad formation, railings, and posts.

Dana Corp.    Toledo, OH 43697
May 18, 2010 Featuring water-based chemistry, eco-friendly Victor Reinz® ThermoGlide 1000(TM) coating provides high-temperature sealing of gasoline and diesel engines. Coating is engineered with blend of high-temperature lubricants and adhesive, offering micro-sealing of metal substrates, preventing escape of gas between exhaust manifold and cylinder head.

Henkel Corporation    Rocky Hill, CT 06067
May 13, 2010 Formulated to increase mold release capacity, Frekote® Aqualine® RS-100(TM) is liquid sealer designed to seal micro-porosity in steel and chrome-plated molds. Applied at temperatures between 199-401°F, it is able to withstand temperatures up to 698°F and cures in 15-20 min. Product is available in 1 and 5 gal containers and is applied through low-pressure spray system.

DuPont    Research Triangle Park, NC 27709-4425
May 04, 2010 DuPont(TM) PV5223 is white reflective encapsulant that is placed on backside of Oerlikon Solar's thin film coatings. It reflects sunlight back through module's active layer, allowing for 94% reflectivity of module. Measuring 0.45 mm thick, sheet offers optimal durability and, by eliminating need for reflective paint, simplifies manufacturing process.

DuPont Co., Packaging & Industrial Polymers    Wilmington, DE 19898
Apr 29, 2010 Designed to seal building envelope, DuPont(TM) Tyvek® Fluid Applied Weather Barrier System allows for sustainable structural design through optimized energy efficiency and water protection. Vapor permeable product features elasticity and low shrinkage, which enable it to move with buildings, unlike other fluid applied materials that can shrink during curing and form pinholes or cracks over time. Clean up is accomplished using mineral spirits or common citrus-based cleaners.

Master Bond, Inc.    Hackensack, NJ 07601
Mar 22, 2010 Offering optical clarity and chemical resistance, UV10TKLO-2 is not oxygen inhibited and cures rapidly at room temperature when exposed to UV light. Maximum UV absorption takes place in 320-365 nm range. One component, modified epoxy system has volume resistivity of greater than 10¹⁴ W cm, dielectric constant of 3.6 at 60 Hz, and service temperature of -60 to 300°F. Product is suited for optical, electro-optical, and vacuum applications.

LIFE Industries Corp.    Charleston, SC 29415
Mar 11, 2010 Designed to bond to fiberglass, wood, metal, glass, and concrete, Fix Repair Putty is impervious to oil, gasoline, alcohol, caustic detergent, and salt water oxidation. Product is heat tolerant to 300°F and cures in 24 hours. Once cured, putty can be sanded, drilled, tapped, screwed, and painted.

Solutia, Inc.    Saint Louis, MO 63166
Mar 02, 2010 Thin gauge encapsulant Saflex® PG41 is designed to enhance solar panel throughput for solar module manufacturers that use vacuum encapsulation process. Embossing technology creates micro channels on surface of encapsulant, which facilitate quick removal of air during vacuum encapsulation process, while also reducing visual defects due to air bubbles trapped in encapsulant. Product is less moisture sensitive at edges, even with fluctuating humidity.

W. R. MEADOWS, INC.    Hampshire, IL 60140-0338
Feb 04, 2010 Non-Ferrous, hydraulic-cement-based Type 588-10K is formulated to transfer load effectively and safely, ensuring long service life of grouted item. Non-corrosive, non-metallic, mineral-based precision grout, developed to have high initial and ultimate flexural and compressive strengths, can be mixed quickly on jobsite and is easily placed by pouring or pumping. Product provides non-shrink performance under various conditions for both interior and exterior applications.

Epoxies Etc.    Cranston, RI 02921-3407
Feb 01, 2010 Type 20-2621 Polyurethane is crystal clear electronic grade potting and encapsulating compound that will not yellow in outdoor applications. Formulated for applications that require electrical insulation, optimum clarity, environmental resistance, and flexibility, this polyurethane system is semi-flexible (shore A85) and will not place excess stress on electronic components during thermal cycling.

Bostik Findley, Inc.    Middleton, MA 01949-2128
Jan 28, 2010 Suited for vertical and horizontal construction applications, 2-component Chem-Calk® 505 seals expansion and control joints in precast concrete construction and metal curtain walls, as well as perimeters of door and window frames and other building components. Non-sag, architectural-grade formulation is solvent-free and meets requirements of ASTM C920, Class 25, Use T, and U.S. Green Building guidelines. Available in 1.5-gal plastic pails, Chem-Calk 505 can be colored with Flex-Pak® Colorants.

Solutia, Inc.    Saint Louis, MO 63166
Jan 25, 2010 Designed for use by solar module manufacturers, Saflex® PA41 thin gauge polyvinyl butyral (PVB)-based encapsulant has undergone IEC and UL testing as well as natural and accelerated weathering tests. Properties promote encapsulating flow around bus bars and other critical components. With encapsulant thickness reduced to 0.76 mm, formulation helps minimize encapsulant usage while maintaining module durability and processing performance.