Acoustical Solutions, Inc.
Richmond, VA 23228
Jan 06, 2005 Sound Sealant achieves and maintains specific STC (Sound Transmission Class) value of wall partition systems. Non-flammable, latex-base product is permanently flexible and adheres to wood or metal studs, concrete, gypsum board, AudioSeal Sound Barrier, and other building substrates. Formulation is non-drying, non-hardening, non-staining, and non-migrating. It comes in 29 oz cartridge that covers ~40 linear feet with 3/8 in. bead.

Master Bond, Inc.
Hackensack, NJ 07601
Dec 09, 2004 Featuring thermal stability, 2-component EP21ARHT-1 is 100% reactive and does not contain any solvents or diluents. It has 2:1 mix ratio by weight and cures at room temperature. Exhibiting minimal shrinkage upon cure, product does not sag or drip on vertical surfaces. Designed to withstand thermal shock and abrasion, it adheres to metals, glass, ceramics, cements, woods, vulcanized rubbers, and plastics. Operating temperature range is -60 to +350°F.

Dow Corning Corp.
Midland, MI 48686 0994
Nov 18, 2004 Combined with pre-qualified, turnkey dispensing process, DOW CORNING® SE 4451 is designed to meet heat-management needs of electronic power devices. It exhibits thermal conductivity of 3W/mk @ 25°C and viscosity of 32,000 cps, which facilitate dispense and cure times.

NYLOK Corp.
Macomb, MI 48042 4007
Nov 01, 2004 Permanently fused on bearing surface of fastener, NYSEAL® self-sealing coating compresses slightly and fills void under bearing surface of head and countersink or bore. It covers 2–3 thread pitches down shank and requires no additional curing or heating after installation. NYSEAL prevents galvanic corrosion between dissimilar materials and is suited for sealing applications involving hydraulic fluids, oil, gasoline, petroleum fluids, water, and gaseous vapors.

Cotronics Corp.
Brooklyn, NY 11232
Oct 18, 2004 Applied by caulking cartridge, 7030 sealer forms gas tight seals with no objectionable odors or harmful fibers. Free flowing formulations are available for rapid or automatic dispensing applications. Room temperature-cure product bonds to metals, ceramics, door gaskets, tadpole gaskets, and ceramic cloths with no special surface treatment required. Corrosion and erosion resistant coatings are formed after a quick post cure at 600°F.

Master Bond, Inc.
Hackensack, NJ 07601
Oct 04, 2004 Type EP34AN room temperature cure, 2-component epoxy adhesive/sealant, with thermal conductivity of 22–24 BTU/in/ft²/hr/°F, maintains physical properties after prolonged exposure to temperatures from 400–450°F. It exhibits dimensional stability and electrical insulation properties and can be applied without sagging or dripping. Able to bond to various substrates, 100% reactive epoxy has Shore D hardness of greater than 85 and tensile strength of 5,500 psi.

Tyco Adhesives
Norwood, MA 02062
Sep 10, 2004 Suited for building trade, Polyken® Stucco 888 Enhanced Masking Material remains attached on jobsite for periods up to 30 days in temperatures to 150°F. Multi-purpose, polyethylene-coated, cloth duct tape withstands UV radiation from sunlight and employs natural, rubber-based adhesive that sticks to rough surfaces. Bright red in color, single-coated, self-wound tape has total thickness of 11.5 mils and tensile strength of 40 lb/in.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Aug 27, 2004 Medium-viscosity, UV- and moisture-curing Loctite® 5252 is designed for post-assembly use on electronic module enclosures. Based on polyether rubber technology, thixotropic sealant withstands temperatures from -40 to +125°C and offers controlled flow. It seals seams without seepage or dripping and allows users to tack material within seconds. Sealant-incorporated fluorescent dye enables online inspection for accurate, complete application.

Hernon Mfg., Inc.
Sanford, FL 32771
Aug 25, 2004 HPS(TM) 1000 and 1100 seal microscopic voids in leaking porous metals such as powdered-metal castings and sintered-metal parts through vacuum application process. Both feature resistance to degradation by hydrocarbon solvents, and lubricity that lowers tool wear. Surfactant-free products facilitate washing of impregnated parts and eliminate need for pretreatment of disposed waste rinse water.

Henkel Consumer Adhesives, Inc.
Avon, OH 44011-1355
Aug 20, 2004 Duck® Tape combines high sheer strength with adhesive power on both sides to create tool suited for temporary mounting, seaming, hanging, and repair applications. Do-it-yourselfers can temporarily hang posters and project instructions, secure outdoor drop cloths, and hold plastic sheeting in place. Duck® tape releases and tears from roll with little effort.

Master Bond, Inc.
Hackensack, NJ 07601
Aug 06, 2004 Dual-component EP42HT-2 epoxy adhesive, sealant, coating, and casting material withstands repeated sterilizations, including radiation, ethylene oxide, chemical sterilants, and steam. Featuring service operating temperature range of -60 to +450°F, product exhibits chemical resistance and Shore D hardness greater than 75. Properties include mixed viscosity of 3,500 cps and tensile strength greater than 12,000 psi. It is castable in thicknesses exceeding 2–3 in.

Master Bond, Inc.
Hackensack, NJ 07601
Jul 15, 2004 One-component, heat-curing, EP17 offers service operating range of -300 to +600°F and cures in 60–90 min at 300–350°F. Product bonds to metals, glass, ceramics, vulcanized rubbers, and plastics. Chemical-resistant EP17 has Shore D hardness greater than 90, compressive strength greater than 13,000 psi, and tensile strength of 8,700 psi. Flowable paste is 100% reactive, does not contain solvents, and can be applied on vertical surfaces without sagging.

Meadows, W.R., Inc.
Hampshire, IL 60140 0338
Jun 30, 2004 Non-yellowing, acrylic-based DECRA-SEAL offers resistance to water, alkalis, mild acids, and petroleum spirits. Transparent product seals and protects decorative colored concrete by producing hard, yet flexible, clear film. DECRA-SEAL meets max VOC content limits of 700 g/L for concrete sealing compounds as required by U.S. EPA Architectural Coatings Rule. It is suited for driveways, patios, swimming pool areas, and exposed aggregate surfaces.

Revere Products
Cleveland, OH 44135 0311
Jun 16, 2004 Pourable, self-leveling CON-CRAX® repairs concrete damage and remains flexible to resist cracking during seasonal weather changes. It requires no mixing or troweling and dries quickly to form watertight seal. Product's color blends with surrounding concrete, making it suited for driveways, sidewalks, parking lots, or stairs. It can be squeezed into cracks up to ½ in. wide and 1 in. deep. CON-CRAX is available in 1 qt bottles, 1 gal bottles, or 5 gal pails.

Quikrete Companies
Atlanta, GA 30329
Jun 11, 2004 QUIKRETE® Polyurethane Self-Leveling Sealant is non-staining and has virtually no shrinkage. Permanently flexible, polymeric, multi-purpose sealant is suited for horizontal joints and cracks. Offering abrasion and tear resistance, QUIKRETE® Polyurethane Non-Sag Sealant is suited for sealing vertical and overhead joints. QUIKRETE® Polyurethane Construction Adhesive is a fast-cure, permanently flexible product for pre-painted metals, plywood, glass, aluminum, steel, plastics, and composites.

Scapa North America
Windsor, CT 06095
May 27, 2004 BondSeal 0442 consists of synthetic, rubber-based sealant strip that is applied to automotive body areas prior to paint cycle for purposes of gap filling, sealing out liquids, and eliminating unwanted noises. Formulated with blowing agents and curatives, product expands within 5 min of heat exposure in paint bake cycle and fully expands after 20 min at 180°C. It is also available with heat activated film on one side.

Garon Products, Inc.
Wall, NJ 07719 1924
Apr 22, 2004 Joint Guardâ„¢ fills expansion joints with flexible epoxy seal that will not become brittle or break out as sections of floor expand and contract in response to temperature changes. With 100% solids formula, product flexes up to 50% and withstands heavy traffic and chemical contact. Pourable, self-leveling, self-priming, non-shrink sealant prevents contaminants from pooling in joint areas.

Bostik
Middleton, MA 01949-2128
Apr 16, 2004 Bostik® Liquid Rivet 1152 FS, with 300 psi tensile strength, is a one-component, moisture-curing polyurethane formulation that can eliminate need for mechanical fasteners. With minimal VOC and low HAP content, product is compliant with CARB and SCAQMD California air quality emissions standards. It is tack-free in 30–45 min and fully cures in 24 hr. Recommended for overhead and vertical bonding, Liquid Rivet is suited for fabricating and assembling transportation and transit vehicles.

Devcon
Danvers, MA 01923
Mar 24, 2004 Effective at temperatures to 250°F (dry) and 125°F (wet), 4 oz Magic Bond(TM) Epoxy Stick consists of 2-part epoxy putty designed to seal leaks and repair gouges in steel, aluminum, wood, fiberglass, concrete, and ceramics. Product mixes by hand kneading, hardening in 30-40 min to finish that can be painted, sanded, machined, tapped, or drilled. Dual-color putty stick includes resin (green) and activator (white), which blend to uniform light gray.

Garon Products, Inc.
Wall, NJ 07719 1924
Mar 23, 2004 Tigerthane 220â„¢ fills expansion joints and permits sections of concrete floor to expand and contract in response to temperature changes in surface. Material, which consists of 100% solids, 2-part, polyurea elastomer, will not become brittle or break out with movement. Joint sealant sets in applications with temperatures from freezing to 130°F and is traffic-ready within 60 min.