Andrew Roberts, Inc.
Natick, MA 01760
Jun 30, 2009 FDA-compliant ANROB 254-MDT features PTFE-glass fabric with aluminum foil backing and silicone adhesive to provide non-stick surface to heat seal against, or a slippery cover for chutes that transport foods or drugs. Available in ¼-39 in. W x 36 yd rolls, tape is 9 mils thick and operates at 500°F continuous. Providing protection against worn tape falling into polybag or package and going undetected, this foil-backed PTFE tape can be identified by metal detector.

Amerimax Building Products, Inc.
Plano, TX 75024
Jun 30, 2009 Available in 6 colors, Aluma-Shield(TM) low-maintenance aluminum patio cover system features Teflon® additive and will repel oil, dirt, dust, and stains. It provides real wood appearance with combination of matte finish and semi-gloss cleaning characteristics. Offering protection against UV, salt, pollution, and weathering, customizable paint system makes surface resistant to chalking, fading, cracks, peels, warps, and termites.

NuSil Technology
Carpinteria, CA 93013
Jun 10, 2009 Available with refractive index of 1.54 and viscosities from 3,500-8,000 cP, LS-3354, LS2-3354, and LS3-3354 are designed for potting, encapsulating, backfilling, and dampening applications requiring soft gel with optical clarity. Cure can be achieved at ambient temperatures with humidity or accelerated with heat, and gels can be removed for rework if needed. Available in 1:1 mix ratio, products are suited for protecting electronic components from dust, debris, and moisture.

NuSil Technology
Carpinteria, CA 93013
Jun 04, 2009 Providing protection from mechanical shock, optically clear LS-3140 is suited for use as encapsulating, embedding, or potting compound for environmental protection of electronic assemblies. Low outgassing gel handles stress during thermal cycling without cracking or delamination. To meet multitude of processing requirements, LS-3140 cures at room temperature, or cure can be accelerated with heat. It is best suited for applications requiring operating temperature of -94 to 392°F.

DuPont
Research Triangle Park, NC 27709-4425
May 20, 2009 DuPont(TM) PV5300 Series and DuPont(TM) PV5200 Series can protect solar cells. DuPont(TM) PV5300 Series sheets can be used for new module designs like building-integrated photovoltaic tiles for installation on building roofs. Based on polyvinyl butyral polymer technology, DuPont(TM) PV5200 Series sheets suit needs of thin-film solar power generation.

DuPont
Research Triangle Park, NC 27709-4425
May 12, 2009 Offered in thicknesses from 35-60 mil, DuPont(TM) PV5300 Series encapsulant sheets are made of clear ionomer and designed to enhance impact resistance, durability, and cost-per-watt efficiency of building-integrated photovoltaic (BIPV) tiles. Properties at 23°C include refractive index value of 1.49, tensile strength of 34.5 MPa, and specific gravity of 0.95. Dielectric constant is 2.9 @ 25°C, while surface and volume resistivity values are, respectively, 1 x 10¹⁶ W and 2.5 x 10¹⁶ W-cm.

DuPont Co., Packaging & Industrial Polymers
Wilmington, DE 19898
May 11, 2009 Designed to meet needs of thin-film solar power generation, DuPont(TM) PV5200 Series assures glass adhesion with optimal visible light transmission. Clear, pliable material is available in thicknesses from 15-45 mils, and is suited for module encapsulation using nip-roll/autoclave and vacuum laminating.

Tape-Rite Co., Inc.
New Hyde Park, NY 11040
May 08, 2009 Available in Teflon®, Mylar, Kapton®, polyethylene, and foil materials, Printed Tapes come in anti-skid versions with grid and textured surfaces, and reflective styles in standard and retro dot approved patterns. Tapes are also available for security and tamper-evident applications. Some security tapes are self-destructive upon removal, while others change color or are printed with logo that cannot be reproduced. All can be custom converted to user requirements.

Henkel Loctite Corporation
Rocky Hill, CT 06067
May 04, 2009 Designed to rapidly bond dissimilar substrates, Loctite® Ultra-Clear Two-Part Silicones maintain flexibility at temperatures from -60 to 450°F. Non-corrosive products cure through large gaps and enclosed bond lines, require no primers, and offer low-odor dispensing. With elongations up to 240%, materials withstand extreme vibration, flexing, and thermal shock. Products cure to handling strength in 15 min and offer shelf lives in excess of 12 months at room temperature.

Cliplight Manufacturing Company
Toronto M3J2J1  Canada
Apr 24, 2009 Ultra Pack features 3 oz, vacuum-packed can of Dry-R, which chemically changes H₂O to low-viscosity, non-oily, and residue-free liquid. It chemically reacts with H₂O to form liquids soluble with AB, mineral, POE, and PAG oils used in refrigeration systems. Super Seal HVACR, designed for 1.5-5 ton AC/R systems, seals undetectable or inaccessible leaks, 300 microns or smaller, in condensers, evaporators, and line sets from inside out. Package also includes charging hose.

Master Bond, Inc.
Hackensack, NJ 07601
Apr 15, 2009 Storage-stable, one component, low viscosity system, EP19HT adhesive/sealant, impregnant, and liner features viscosity of 500-600 cps at 75°F and cures readily at elevated temperatures to tough, chemically resistant thermoset plastic. Recommended cure is 1 h at 250°F, while shorter cures can be achieved at temperatures between 325-350°F. Exhibiting minimal shrinkage upon cure, product has service operating temperature range of -60 to 400°F and tensile strength greater than 10,000 psi.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Apr 03, 2009 Loctite® line of halogen-free adhesives and sealants are formulated to contain less than 900 ppm bromine and chlorine as well as 1,500 ppm total halogens. Product range includes cyanoacrylates, light cure cyanoacrylates, epoxies, urethanes, UV acrylics, silicones, hot melts, two-part acrylics, and anaerobics used for bonding, sealing, gasketing, and mounting range of components. All meet IPC IEC No. 61249-2-21 requirements.

May National Corp.
Lakewood, NJ 08701
Mar 17, 2009 One-component Bondaflex® Silfast(TM) 501 is suited for window fabrication, production of curtainwall and skylights, and impact security glazing systems in shop or field. Offering fast assembly solution, 2-component Bondaflex® Silfast(TM) 502 combines structural glazing and weatherseal applications into one product. Both neutral-cure, non-sag products bond to most substrates without priming, including vinyl, glass, aluminum, tile, fiberglass, and many plastic and painted surfaces.

Michelman Inc.
Cincinnati, OH 45236
Mar 13, 2009 Self-priming Flex HS-100 can be applied directly to variety of stock and untreated films using only corona, plasma, or flame pre-treatment. Product has ability to seal to itself from low temperature of 60°C to above melting point of polypropylene. Requiring just 1-2 dry microns of coating, Flex HS-100 produces clear and transparent finish and is food contact compliant. It has been tested on BOPP, BOPET, BOPA, Cellulose, and PLA films.

Emseal Joint Systems, Ltd.
Westborough, MA 01581
Mar 13, 2009 CHEMSEAL+5 is pre-compressed, primary seal for expansion and construction joints where contact with chemicals and chemical dilutions is expected. It is composed of nonstaining, microsphere-modified-acrylic-impregnated foam backing, which is precoated with chemical-resistant polysulfide sealant. Able to resist water pressure of up to 5 ft without product deflection or leakage, sealant is suited for submerged or intermittent-contact applications.

Meadows, W.R., Inc.
Hampshire, IL 60140 0338
Mar 05, 2009 Composed of 100% recycled synthetic rubber, ECO-JOINT is flexible, chemical-resistant, and UV-stable. It is compatible with most hot and cold joint sealants and will not deform, twist, or break with normal handling. Suited for both interior and exterior environments, ECO-JOINT acts as bond breaker and contains no asphalt. Applications include roadways, airport runways, sidewalks, pavement patch repair, driveways, flooring, parking lots, flatwork, patios, and curbs.

Todol Products
Natick, MA 01760
Feb 26, 2009 Designed for plugging and sealing applications to quickly stop flowing water, Todol Duo-Fill 400 Two-Part Urethane Foam Sealant mixes directly in actuator head of 9 in. long dispensing tube, which permits visual quality control. It provides chemical cure in one minute, unaffected by weather, and adheres well to most construction materials and offers multiple starts and closures. Supplied with 15 cans and 30 actuator-dispensers per case, 13 oz can expands to 3.5 gal of foam sealant.

Chemline Inc.
St. Louis, MO 63103
Feb 25, 2009 With ability to cure to touch in 60 sec, CHEMTHANE 8190 two-part polyurea elastomer is suited for repairing spalled joints, as well as filling random cracks and patching gouges, holes, and surface defects. It cures in applications ranging from freezing conditions to 130°F, and becomes ready trimming flush within 20 min. Non-brittle product allows floor to move, and prevents contaminants from pooling in joint areas.

Emseal Joint Systems, Ltd.
Westborough, MA 01581
Feb 18, 2009 Comprised of hybrid silicone and impregnated precompressed foam sealant system, UL/ULC-Certified EMSHIELD DFR2 is suited for use in new/retrofit construction and infrastructure applications for containment of fire at structural expansion joints. It can withstand vehicular and other traffic; handle thermal-, traffic-, wind-, and seismic-induced movements; and provide waterproofing protection of adjacent building materials, all while providing life-safety protection of 2 hr fire rating.

Delta Chemicals Inc.
Smithtown, NY 11787
Feb 10, 2009 Featuring deep-penetrating formula for concrete as well as wood, metal, and steel surfaces, epoxy floor sealer and coating No. 7300 is designed for use in industrial applications such as warehouses, production floors, as well as shop and garage floors. Heavy-duty product cures, seals, hardens, and dust-proofs floors and may also be specially formulated as non-slip surface coating. In addition to clear, complete range of color options are available.