Company News

Phoenix Contact

586 Fulling Mill Rd., Middletown, PA, 17057, USA

  • 800-888-7388

Latest New Product News from
Phoenix Contact

Electrical Equipment & Systems, Mounting & Attaching Products

SDDC 1.5 Connectors feature SKEDD plug-in technology.

March 15, 2017

Enabling direct connections to PCB via through-contacted bore holes, SDDC 1.5 Connector System eliminates header and soldering process. Featuring orange spring lever for easy removal, units have 3.5-mm centerline and accommodate wires in 24 to 16 AWG range. Designed for currents up to 8 A at 300 V UL, connectors can house 4 to 32 conductors.

Read More

Electrical Equipment & Systems

CBMC Circuit Breaker features electronic adjustable channels.

February 27, 2017

Meeting NEC Class 2 standards, CBMC Circuit Breaker is designed with four channels for protection against overload and short circuit. Unit limits total output power to less than 100 W per channel when it is connected to 24 V DC applications. Measuring 36 mm wide, unit’s channels can be adjusted from 1 A to 4 A. CBMC are also available with four-channel configuration with 1 to 10 A adjustable... Read More

Electronic Components & Devices

SPTAF 1 PCB Terminal Blocks feature low profile connector body.

January 13, 2017

Designed with 8- and 11-mm high terminal blocks, SPTAF 1 PCB Terminal Blocks feature IL, EL and LL series spring lever options. Ensuring 8 mm overall connector height, IL series comes with internal lever. Rated to 300V UL compatible and 8 A current with 16 to 24 AWG wires, units are available in 3.5mm and 5 mm pitch with 16 positions for each connector. EL series and LL series terminals are 10... Read More

Sensors Monitors & Transducers

MACX MCR-VDC DC Voltage Transducers are UL/cUL Listed.

December 16, 2016

Suitable for DC power supplies, battery banks, solar arrays and combiner boxes, MACX MCR-VDC transducer includes programming interface and optional push-in connection technology. With selectable analog outputs of 2 to 10 V/4-20 mA (unipolar) or ±10 V/0 to ±20 mA (bipolar), device offers optional teach-in function to simplify zero/span adjustments. Operating between -25 and 60 °C, unit... Read More

Electrical Equipment & Systems

DC/DC Power Converter are designed for photovoltaic applications.

October 24, 2016

Certified to UL 1741, UNO Solar connects directly to solar array and thereby eliminates need for trenching for combiner, re-combiner, and inverter control for anti-islanding applications. Unit accepts 300–1,000 Vdc input generated by array and converts it to electrically isolated, 24 V DC/2.5 A output voltage. For higher currents, parallel wiring via decoupling diode is supported.... Read More

Computer Hardware & Peripherals

Portable Card Printer is designed for industrial use.

October 11, 2016

Used for on-site and stationary identification in and around industrial control cabinet, Thermomark Prime prints on UCT cards and US sheet materials. Integrated marking software allows direct input of data, drop-in ink cartridge facilitates loading, and automatic material detection accelerates project initiation. Powered by rechargeable NiMH battery that provides several hours of operation per... Read More

Computer Hardware & Peripherals, Display & Presentation Equipment

Widescreen Industrial Monitors support multi-touch operation.

October 4, 2016

Built for operation in rough industrial environments with -10 to +60°C ambient range, Basicline flat panel monitors (BL FPM) come in 15.6, 18.5, and 21.5 in. screen sizes and provide VGA, DVI-I, and DisplayPort interfaces to facilitate integration into new or existing systems. Projective-capacitive, 10-point touchscreen supports operation based on gesture control. Along with scratch-resistant... Read More

Electronic Components & Devices

PCB Connector eliminates need for additional header, soldering.

September 26, 2016

Available in 1–16 positions and with 5 mm centerline, SDC 2.5 connectors plug directly into PCB via through-contacted bore holes. SKEDD plug-in technology facilitates PCB mounting without tools; each contact pin is made up of 2 flexible halves that adjust to plated through-holes on PCB; and integrated body-bound rivets lock connectors into place and form vibration-resistant... Read More

Electrical Equipment & Systems

DIN Rail Mount Power Supplies feature real-time monitoring.

September 16, 2016

QUINT POWER power supplies provide control engineers with configuration and diagnostics to ensure reliable power to control system. With secured NFC, power supplies can be configured while still in box. User-definable settings allow monitoring of real-time DC current, power, or voltage using 4–20 mA analog output. Operating hours, DC input voltage, overvoltage, and temperature derating can be... Read More

Electronic Components & Devices

Terminal Blocks feature push-in connection technology.

August 25, 2016

Occupying same amount of space as 2-position models, 4-position PT 2,5/S-QUATTRO Terminal Blocks allow for high wiring density without sacrificing space across DIN rail. Up to four 12 AWG conductors can be connected in one feed-through terminal block. Push-in connection technology enables quick, tool-free wiring of pre-assembled conductors. Multi-conductor terminal blocks also have double... Read More

Electrical Equipment & Systems, Electronic Components & Devices, Test & Measuring Instruments

Signal Conditioners feature SIL 3 certification.

August 16, 2016

Produced according to SIL specifications for functional safety in all phases of product life cycle, 0(4)-20 mA MACX Signal Conditioners convert, isolate, filter, and amplify analog signals. Two-way, input-loop-powered isolators allow operation on active sensor technology with supply voltage of 6–30 Vdc and do not require additional power supply. Single- and 2-channel variants are available with... Read More

Electrical Equipment & Systems

Branch Circuit Breakers carry UL 489 listing, worldwide approvals.

July 5, 2016

Available in 1-, 2-, and 3-pole options with B-, C-, and D-trip curves, TMC 8 series provides fundamental branch circuit protection. These 17 mm DIN rail-mounted breakers, with interrupt capacity of 10 kA IC at up to 277/480 Vac and 125 Vdc, safely open circuits during overload and short-circuit events to prevent wiring from causing fires. While trip-free design increases safety against closing... Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems

Managed Ethernet Switches support DLR redundancy mechanism.

June 21, 2016

Supporting Common Industrial Protocol for use in EtherNet/IP networks, Series 7000 features recovery times of less than 3 ms, enabling switch-over to be performed quickly in event of failure. Switches support Device Level Ring redundancy mechanism and enable up to 6 non-DLR-capable devices to be integrated into ring. Functions such as IGMP snooping, multicast source detection, and auto-query port... Read More

Electrical Equipment & Systems, Electronic Components & Devices

Miniature Latching Connectors suit LED applications.

May 19, 2016

Available with secure latching mechanism, PTSM Connectors can be locked together in lighting and other space-critical applications. Locking feature, which does not require any special tools, is compatible with existing PTSM headers, enabling connectors to be combined in multiple ways, such as wire-to-board, board-to-board, wire-to-wire, and through-board. Measuring 5 mm high with 2.5 mm pitch,... Read More

Electrical Equipment & Systems

Power Distribution Boxes eliminate voltage drop in field.

May 9, 2016

Designed for field-based power supply voltages of 24 V, M12 Power Distribution Boxes, in combination with standard M12 power cables of 4x10 AWG conductors, can eliminate voltage drop that occurs across long cable runs. Distributor has four T-coded M12 receptacles with current load up to 10 A/channel. Each of 8 channels is equipped with plug-in fuse, and LEDs indicate status of input and output... Read More

Controls & Controllers, Electrical Equipment & Systems, Sensors Monitors & Transducers, Test & Measuring Instruments

Analog Signal Conversion Transducers install in tight areas.

March 17, 2016

As universally configurable limit-value switch with PDT relay output, MINI PRO set-point relay module has plug-in connection technology. Analog input switching range is adjustable from 0–24 mA and 0–12 V, and form C relay on output side is rated to 250 V AC/DC up to 6 A. Offering adjustable input values from 0–24 mA and 0–12 V, MINI PRO analog-to-frequency transducer supports frequency... Read More

Electrical Equipment & Systems

SIL 3-Rated Safety Relays measure as thin as 6 mm.

March 9, 2016

Available in 6 mm (slim) and 12 mm (compact) form factors, PSRmini allows for 6 A, force-guided safety connections. Slim variants have 1 or 2 NO safety-rated contacts, while compact variants have up to 3. All products switch loads up to 6 A and are compatible with various signaling devices, such as emergency stop equipment, safety-door switches, and light grids. Approvals make these relays... Read More

Electrical Equipment & Systems

Uninterruptable Power Supply (24 V DC) measures 110 x 90 x 84 mm.

January 28, 2016

Suitable for use with compact controllers, PLCs, HMIs, and other low-power devices, UNO-UPS provides standby power upon AC mains power loss. Integrated 0.8 Ah absorbed glass mat lead-acid battery, mounted on front and released with screw, operates from -15 to +50°C and has 5-year max life expectancy. Battery runtime can be adjusted by rotary dial or remote shutdown input, and external 24... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Modular Test Device checks health of surge-protection plugs.

January 19, 2016

In single test cycle, Checkmaster 2 checks protective elements such as spark gaps, gas-filled surge arresters, voltage-dependent resistors, and suppressor diodes. Test results are recorded electronically in accordance with IEC 62305 lightning protection standards and saved to internal memory with power supply failure protection. Reports from test are available via USB stick for review and... Read More

Electrical Equipment & Systems, Mechanical Power Transmission, Mounting & Attaching Products

Feed Through Panel/Plate handles up to 37 cables.

January 15, 2016

Offering panel feed-through solution especially suited where panel-mounted connectors are not preferred, Cable Entry System (CES) Multigates consist of space-saving, metal-reinforced cable entry plates. Double-membrane sealing ensures IP66/67 protection, and oil-resistant construction features UL 94 V0 flame rating and -40 to +100°C temperature rating. Products handle up to 37 cables... Read More

Other Company News from
Phoenix Contact

November 26, 2007

New 2007/2008 Catalogues