Phoenix Contact
Middletown, PA 17057
Controller suits thermal cutoff and forming applications.
IB IL TEMPCON Module can be configured as PID 2-position controller, 3-position controller, or motor step controller for closed-loop applications. DIN-rail-mounted unit, for thermocouples or RTDs, includes machine preheat, auto tune, and bumpless hand/automatic switching. All functions are parameterized with Windows-based engineering tool or via device-level network. Integrated monitoring and...
Read More »
Digital Displays offer simple programming.
Designed for analog and temperature inputs, products feature 5-digit LED display and are offered in 2 sizes: 48 x 24 mm with supply voltages of 10-30 Vdc, and 96 x 48 mm with supply voltages of 10-30 Vdc and 90-260 Vac. Both versions offer electrical isolation of circuits rated at 2.3 kV and programmable scaling function. Analog-input models incorporate signal-totalizer mode, while...
Read More »
Positioning Controller provides quick machine changeover.
Model IB IL POS 200 Multi-Axis Positioning Controller Module offers intermediate solution between manual changeover and total servo control. It allows user to do automatic machine set up using existing controls. Communication of parameters and motion commands is done over device level network. Up to 10 axes of motion can be controlled in modular system. Additional function modules can be added.
Read More »
Double Level Terminal Block has angled wire entrance.
Measuring 5.2 mm wide, STTBS 2.5 spring cage terminal block handles applications up to 300 V, 20 A with wire range of No. 26-12 AWG. Each level has two bridge channels that accommodate push-in style jumpers. Dual-channel system bridges as many blocks as needed, while labeling area in center allows for identification. Styles include: double level feed-through and interconnected blocks, ground...
Read More »
Terminal Blocks accept three types of fuses.
Three styles of ST 4 fuse terminal blocks include: compact 6.2 mm wide that accepts 5 x 20 mm fuses; 8.2 mm wide that accepts 6.3 x 32 mm fuses; and versatile 8.2 mm wide that accepts pluggable auto fuses or pluggable TCP thermal miniature circuit breaker. Blocks come with or without light indication that is displayed when fuse blows or circuit breaker is tripped. Fuse blocks have universal ST...
Read More »
Fiber-Optic Converters isolate DeviceNet networks.
Modular, DIN-rail-mounted PSI-MOS-DNET system consists of fiber-optic converters that allow complete isolation of DeviceNet networks as well as full redundant operation of fiber communication lines and power supply. Immune to EMI, RFI, and transient surges, system allows use of base module for point-to-point configurations for line structures and extended bus drops. Offered with fiber-optic line...
Read More »
PCB Terminal Blocks suit building automation industry.
Combicon Compact family consists of 3 series with 5.0 and 3.5 mm pin spacing. Series PT modular, wire-protector style, screw terminal block utilizes combination +/- screw head. Utilizing spring technology, Series CPT 1 provides 2 termination points per circuit and accommodates 20-16 AWG solid/stranded wires. Offered in 2-24 positions on 3.5 mm pin spacing, Series PTSA spring-force terminal block,...
Read More »
Amplifier conditions strain gages and load cell sensors.
MCR-Strain Gage amplifier module includes 1,000 V 3-way galvanic isolation between power supply, input, and output circuits. It supports strain gages/load cells with resistances from 120 to 20,000 ohms. Module filters and conditions signals to eliminate unwanted signal noise with DIP switch selectable cutoff frequencies of 30 Hz or 5,000 Hz. Outputs are provided for voltage (0-10, -±10, 0-5, or...
Read More »
I/O Module simplifies network and wiring connections.
With IP67 environmental rating, Fieldline I/O module can be implemented on fieldbus protocols such as DeviceNet, CANopen, INTERBUS, and Profibus DP. Offered with several mounting options, module includes integrated diagnostics that provide local indication of bus error states and I/O device status. Bus specific parameters are set external to module with screwdriver. Sensor/Actuator devices and...
Read More »
Terminal Blocks have spring cage design.
ST mini spring cage terminal blocks include knife disconnects available in 2-, 3- and 4-wire terminals. Measuring 5 x 20 mm, they provide test sockets for 2.3 mm test plugs on both sides of isolation point. Multi-level terminals are available in 3- and 4-level versions and use dual bridge system. Rated at 20 A and 300 V, ST-Combi plug system makes rated line current of 2.5 mmÃ-² wire...
Read More »