Phoenix Contact

Managed Ethernet Switches support DLR redundancy mechanism.
Communication Systems & Equipment

Managed Ethernet Switches support DLR redundancy mechanism.

Supporting Common Industrial Protocol for use in EtherNet/IP networks, Series 7000 features recovery times of less than 3 ms, enabling switch-over to be performed quickly in event of failure. Switches support Device Level Ring redundancy mechanism and enable up to 6 non-DLR-capable devices to be integrated into ring. Functions such as IGMP snooping, multicast source detection, and auto-query port...

Read More »
Miniature Latching Connectors suit LED applications.
Electrical Equipment & Systems

Miniature Latching Connectors suit LED applications.

Available with secure latching mechanism, PTSM Connectors can be locked together in lighting and other space-critical applications. Locking feature, which does not require any special tools, is compatible with existing PTSM headers, enabling connectors to be combined in multiple ways, such as wire-to-board, board-to-board, wire-to-wire, and through-board. Measuring 5 mm high with 2.5 mm pitch,...

Read More »
Power Distribution Boxes eliminate voltage drop in field.
Architectural & Civil Engineering Products

Power Distribution Boxes eliminate voltage drop in field.

Designed for field-based power supply voltages of 24 V, M12 Power Distribution Boxes, in combination with standard M12 power cables of 4x10 AWG conductors, can eliminate voltage drop that occurs across long cable runs. Distributor has four T-coded M12 receptacles with current load up to 10 A/channel. Each of 8 channels is equipped with plug-in fuse, and LEDs indicate status of input and output...

Read More »
Analog Signal Conversion Transducers install in tight areas.
Controls & Controllers

Analog Signal Conversion Transducers install in tight areas.

As universally configurable limit-value switch with PDT relay output, MINI PRO set-point relay module has plug-in connection technology. Analog input switching range is adjustable from 0–24 mA and 0–12 V, and form C relay on output side is rated to 250 V AC/DC up to 6 A. OfferingÂ- adjustable input values from 0–24 mA and 0–12 V, MINI PRO analog-to-frequency transducer supports...

Read More »
SIL 3-Rated Safety Relays measure as thin as 6 mm.
Electrical Equipment & Systems

SIL 3-Rated Safety Relays measure as thin as 6 mm.

Available in 6 mm (slim) and 12 mm (compact) form factors, PSRmini allows for 6 A, force-guided safety connections. Slim variants haveÂ- 1 or 2 NO safety-rated contacts, while compact variants have up to 3. All products switch loads up to 6 A and are compatible with various signaling devices, such as emergency stop equipment, safety-door switches, and light grids. Approvals...

Read More »
Uninterruptable Power Supply (24 V DC) measures 110 x 90 x 84 mm.
Electrical Equipment & Systems

Uninterruptable Power Supply (24 V DC) measures 110 x 90 x 84 mm.

Suitable for use with compact controllers, PLCs, HMIs, and other low-power devices, UNO-UPS provides standby power upon AC mains power loss. Integrated 0.8 Ah absorbed glass mat lead-acid battery, mounted on front and released withÂ- screw, operates from -15 to +50°C and has 5-year max life expectancy. Battery runtime can be adjusted by rotary dial or remote shutdown input, and...

Read More »
Modular Test Device checks health of surge-protection plugs.
Test & Measurement

Modular Test Device checks health of surge-protection plugs.

In single test cycle, Checkmaster 2 checks protective elements such as spark gaps, gas-filled surge arresters, voltage-dependent resistors, and suppressor diodes. Test results are recorded electronically in accordance with IEC 62305 lightning protection standards and saved to internal memory with power supply failure protection. Reports from test are available via USB stick for review and...

Read More »
Feed Through Panel/Plate handles up to 37 cables.
Architectural & Civil Engineering Products

Feed Through Panel/Plate handles up to 37 cables.

Offering panel feed-through solution especially suited whereÂ- panel-mounted connectors are not preferred, Cable Entry System (CES) Multigates consist of space-saving, metal-reinforced cable entry plates. Double-membrane sealing ensures IP66/67 protection, and oil-resistant construction features UL 94 V0 flame rating and -40 to +100°C temperature rating. Products handle up to...

Read More »
Knife Disconnect Terminal Blocks offer tool-free actuation.
Architectural & Civil Engineering Products

Knife Disconnect Terminal Blocks offer tool-free actuation.

Respectively, UT 4-MTL and UT 6-MTL are available in 6.2 and 8.2 mm terminal widths and support 26–10 AWG and 24–8 AWG.Â- Finger levers, which do not require tool for finger-safe actuation, enable technicians to safely perform circuit-polarity checks and troubleshooting without disrupting service. UL Recognized for 600 V and up to 20 A, these knife disconnect terminal blocks...

Read More »
Power Supplies feature push-in connections.
Electrical Equipment & Systems

Power Supplies feature push-in connections.

Ranging from 72–480 W, with variations for single- and 3-phase applications, TRIO POWER Series includes diagnostic contact, input surge protector, up to 150% dynamic power boost output, and MTBF rating of over 1 million hours. Devices pair with CBM programmable circuit breakers, which also use push-in terminals. Together, TRIO and CBM Power Pair offers up to 20 A and protection for up to 8...

Read More »

All Topics