Phoenix Contact

Analog Splitter divides transmitter signal.
Controls & Controllers

Analog Splitter divides transmitter signal.

MCR splitter takes signal from transmitter and sends two identical or different signals to receiving devices for monitoring, recording, or control. Input and two output ranges can be selected via DIP switches. Selectable analog signal ranges include 4 to 20 mA, 0 to 20 mA, 0 to l0 mA, 0 to l0 V, 0 to 5 V and 1 to 5 V. All analog range options are pre-configured and stored, eliminating need for...

Read More »
Plug-In Connectors have screw-type lock.
Construction Equipment and Supplies

Plug-In Connectors have screw-type lock.

Heavycon Advance rectangular plug-in connector housing is suitable for applications where connection is typically not plugged, such as feed-through holes in panels. Housings are compatible with contact inserts and panel cutouts in company's Heavycon B Series range and meet specs for IP 67. They are available in grey standard housing for automotive and machine industries, housings for corrosion...

Read More »
Industrial Ethernet Connectors meet IP67 watertight rating.
Construction Equipment and Supplies

Industrial Ethernet Connectors meet IP67 watertight rating.

Variosub RJ-45 connectors are suitable for fast Ethernet transmissions at 100 Mbps in accordance with Class D or Category 5 of EN 50173. Protects against dirt and moisture, withstands adverse conditions associated with use on machinery and industrial installations, and protects RJ-45 contact insert. Connector is protected against forces pulling mounting and hood sides apart, pulling cables out of...

Read More »
Controls & Controllers

Ethernet Switch connects five segments.

Stand alone FL Switch 5 TX Ethernet/Fast Ethernet unmanaged switch permits connection of up to five twisted pair Ethernet segments, supports both 10 Mbs and 100 Mbs transmission rates through autonegotiation, and supports either 1:1 or cross-over Ethernet cabling. Its alarm output can be used to externally monitor redundant power source. DIN-rail mountable module has industrialized housing.

Read More »
Fieldbus Coupler fits CANopen systems.
Communication Systems & Equipment

Fieldbus Coupler fits CANopen systems.

IL CAN BK bus coupler operates at any position in CANopen network. It uses diagnostics element to send detailed failure cause and location data to master, where they can be evaluated by appropriate software. Diagnostics and status displays enable exact module fault location and on-site determination of cause. Coupler supports analog and digital I/O, special function I/O, Category 4 Safety relay...

Read More »
Interface Boards connect to Galil motion controls.
Agricultural & Farming Products

Interface Boards connect to Galil motion controls.

VARIOFACE interconnect for Galil OPTIMA and ECONO series digital motion controllers can be used directly with Galil's 100, 80, and 36-pin cables. The 100-pin version comes with additional amplifier driver circuit and discrete screw connection to all conductors of Galil cable. Specific marking of each connection allows for quick, space-saving installation. Module is available as DIN-Rail or...

Read More »
Surge Suppressor handles three phase power.
Electrical Equipment & Systems

Surge Suppressor handles three phase power.

BRICKTRAB modular DIN-rail mountable transient voltage surge suppressor provides power installations with more than 40,000 A of surge current handling capacity and low voltage protection levels. It protects against normal mode (line-to-line) and common mode (line-to-ground) transients, and has diagnostic monitoring of protection status with local and remote failure indication. Meets UL 1449 2nd...

Read More »
Wireless I/O handles analog and digital signals.
Communication Systems & Equipment

Wireless I/O handles analog and digital signals.

MCR-RAD integrated radio and I/O module eliminates cable and conduit for analog and digital signals in harsh industrial environments. Modules are available as transmitter/receiver pair and come factory programmed, calibrated, and tested as set, capable of carrying one 4 to 20 mA current loop and two digital status signals. Typical in-plant range is 600 to 1,000 ft, farther in outdoor...

Read More »
Connectors complement sensor/actuator distribution boxes.
Construction Equipment and Supplies

Connectors complement sensor/actuator distribution boxes.

M8 and M12 connectors feature gold-plated contacts, mechanical safeguard against vibration, and IP67 protection. They come in straight and angled versions, each with male and female contacts in 3, 4, or 5 positions. M8 connectors are available in 3 and 4 positions. Female connectors are available with or without LEDs. Union nuts made of plastic or stainless steel provide corrosion resistance.

Read More »

All Topics