Phoenix Contact

Multichannel Circuit Breakers for CID2 Use
Chemicals & Gases

Multichannel Circuit Breakers for CID2 Use

Middletown, Pa. – The CBM (circuit breaker multichannel) from Phoenix Contact has received Class I, Division 2 approval. This approval makes the CBM suitable for use in hazardous locations such as oil refineries, offshore platforms, and wastewater treatment facilities. The CBM is a programmable circuit breaker that can manage multiple circuits in a single, compact device. The CBM is available...

Read More »
Safe Testing for Switchgear Applications
Test & Measurement

Safe Testing for Switchgear Applications

MIDDLETOWN, Pa. – Utility engineers and technicians can now complete complex switching operations in a single procedure with Phoenix Contact’s FAME 3 Test System (Fast and Modular Energy). The touch-safe testing system features ring-lug terminal connections, preferred by U.S. electric power companies.Â-  FAME 3 incorporates a pluggable system for testing and system maintenance for low-...

Read More »
Modular high-density Housing
Agricultural & Farming Products

Modular high-density Housing

Middletown, Pa. – With the ME-IO housing from Phoenix Contact, design engineers can create and build their own custom controllers, rather than settling for an off-the-shelf controller that doesn’t suit the application needs. A variety of widths, heights, and configurations yield a wide range of design options. The ME-IO can accommodate up to 60 connection points in an 18-mm wide package. If...

Read More »
Branch Circuit Breakers carry UL 489 listing, worldwide approvals.
Chemicals & Gases

Branch Circuit Breakers carry UL 489 listing, worldwide approvals.

Available in 1-, 2-, and 3-pole options with B-, C-, and D-trip curves, TMC 8 series provides fundamental branch circuit protection. These 17 mm DIN rail-mounted breakers, with interrupt capacity of 10 kA IC at up to 277/480 Vac and 125 Vdc, safely open circuits during overload and short-circuit events to prevent wiring from causing fires. While trip-free design increases safety against closing...

Read More »
Managed Ethernet Switches support DLR redundancy mechanism.
Communication Systems & Equipment

Managed Ethernet Switches support DLR redundancy mechanism.

Supporting Common Industrial Protocol for use in EtherNet/IP networks, Series 7000 features recovery times of less than 3 ms, enabling switch-over to be performed quickly in event of failure. Switches support Device Level Ring redundancy mechanism and enable up to 6 non-DLR-capable devices to be integrated into ring. Functions such as IGMP snooping, multicast source detection, and auto-query port...

Read More »
Miniature Latching Connectors suit LED applications.
Construction Equipment and Supplies

Miniature Latching Connectors suit LED applications.

Available with secure latching mechanism, PTSM Connectors can be locked together in lighting and other space-critical applications. Locking feature, which does not require any special tools, is compatible with existing PTSM headers, enabling connectors to be combined in multiple ways, such as wire-to-board, board-to-board, wire-to-wire, and through-board. Measuring 5 mm high with 2.5 mm pitch,...

Read More »
Power Distribution Boxes eliminate voltage drop in field.
Architectural & Civil Engineering Products

Power Distribution Boxes eliminate voltage drop in field.

Designed for field-based power supply voltages of 24 V, M12 Power Distribution Boxes, in combination with standard M12 power cables of 4x10 AWG conductors, can eliminate voltage drop that occurs across long cable runs. Distributor has four T-coded M12 receptacles with current load up to 10 A/channel. Each of 8 channels is equipped with plug-in fuse, and LEDs indicate status of input and output...

Read More »
Miniature M12 Connector is rated to 16 A and 630 V.
Construction Equipment and Supplies

Miniature M12 Connector is rated to 16 A and 630 V.

Used in industrial environments, S-coded flush-type connectors and cordsets haveÂ- 2 positions and protective earth ground. Panel-mount connectors are pre-assembled with 0.5 m long wires with conductor cross section of 16 AWG. With IP67 protection and metal M16 X 1.5 panel-mount thread, circular connector system is suitable for use asÂ- main power connector. Pin and socket versions are...

Read More »
Terminal Blocks for Hazardous Locations Meet Needs of Process Industry
Architectural & Civil Engineering Products

Terminal Blocks for Hazardous Locations Meet Needs of Process Industry

MIDDLETOWN, Pa. – Phoenix Contact's line of screw-clamp terminal blocks now includes pluggable fuse and knife disconnect terminal blocks for potentially explosive areas (Class I, Zone 2). The 6.2 mm and 8.2 mm terminals meet the requirements of ignition protection standards important for control applications throughout the process industry, particularly within oil and gas and petrochemical...

Read More »
Disconnect Terminal Blocks suit hazardous locations.
Architectural & Civil Engineering Products

Disconnect Terminal Blocks suit hazardous locations.

Featuring pluggable P-FU-EX fuse holders for 5 x 20 mm or 6.3 x 32 mm fuse inserts, Models UT 4-MT-EX, UT 4-TG-EX, and UT 6-TG-EX use screw-clamp connection technology for ferruled or stranded wires, and are rated for multiple wire connections. Fuse and knife disconnect terminal blocks have current-carrying capacity up to 16 A per UL file XCIB2.E192998. Devices' 6.2 and 8.2 mm terminals meet...

Read More »

All Topics