Company News

Stockwell Elastomerics, Inc.

4749 Tolbut St., Philadelphia, PA, 19136, US

  • 215-335-3005
  • 800-523-0123

General Information:
Bill Stockwell
Phone: 215-335-3005
E-mail this person

Share Like Tweet Add Email

Latest New Product News from
Stockwell Elastomerics, Inc.

Mounting & Attaching Products

EMI Shielding Gaskets suit large enclosures.

January 8, 2015

Provided in 0.125 in. and 0.250 in. thicknesses, Combination EMI Shielding Gaskets are fabricated from closed cell silicone sponge, silicone foam, and fluorosilicone sponge with edge bonded knitted monel wires. Gaskets are thicker and softer than filled conductive rubber EMI gaskets, making them suited for large enclosures requiring environmental gaskets and EMI shielding. Pressure sensitive adhesive aids installation, while monel mesh offers corrosion resistance and ability to resist oxidation. Read More

Adhesives & Sealants

Gasket Tape is suited for NEMA enclosures and digital signage.

March 14, 2014

Available as die cut gaskets and in slit-to-width rolls, 480S Gasket Tape is made from Saint-Gobain R10480S soft, low compression set, closed cell silicone sponge that allows for weather sealing with low closure force. Material is UL JMLU2, UL 50E, and UL 508 recognized for gaskets and seals used in continuous compression and period recompression. Backed by 3M 9485 acrylic adhesive capable of bonding to diverse substrates, tape comes in thicknesses of .125, .188, and .250 in. Read More

Mounting & Attaching Products

Molded Silicone Rubber Gaskets come in low durometers.

May 23, 2013

Consisting 10 and 20 durometer Shore A molded Liquid Silicone Rubber compounds, respectively, Wacker Silicones LR3003/10TR and LR3003/20TR provide water sealing and protection for enclosures and portable devices. Products feature optimized tear resistance and surface condition as well as resistance to damaging effects of UV. Also available in 10 and 20 durometer, 12 x 12 in. injection molded liquid silicone rubber sheets come in standard thicknesses of .032, .050, .062, .093, and .125 in. Read More

Adhesives & Sealants, Chemical Processing & Waste Management

Silicone PSA has easily removable release liner.

June 29, 2010

Intended for silicone gasket and cushioning pad applications where acrylic adhesive systems cannot be used, DP-1001 polyimide film-supported silicone pressure sensitive adhesive (PSA) features 91 lb poly-coated opaque white release liner designed to facilitate separation from silicone adhesive. This cross-linked silicone adhesive has continuous service from -100 to +500°F and short-term, intermittent service to 600°F. Read More

Mounting & Attaching Products

Silicone Rubber Gaskets suit EMI shielding applications.

February 25, 2005

Nickel-graphite filled SNE555, silver-plated glass filled SGE565, and silver-plated aluminum filled SGE565 are silicone rubber gaskets supplied with conductive acrylic adhesives. Low viscosity primer allows lamination of 3M Corporations' No. 9713 conductive fabric supported acrylic adhesive and Venture Tapes' No. 1692 conductive particle-filled acrylic adhesive onto conductive silicone rubber and oriented wire filled silicone gasketing materials. Read More

Mounting & Attaching Products

Sponge Gasket Material provides ESD protection.

February 25, 2005

Semi-Conductive S4503-CON closed cell, synthetic rubber sponge is formulated to have 500,000 ohms per square maximum surface resistivity. Compression force deflection is 3-7 lb per square inch. Sheets are available in .125, .250, .375, .500, .750, and 1.0 in. thicknesses. Material is suited for gaskets and cushioning pads in aerospace ground support, powder chemical processing, and integrated circuit handling applications requiring ESD grounding. Read More

Mounting & Attaching Products

Silicone Sponge Products are used as cushions and seals.

February 24, 2005

Cohrlastic® closed cell silicone sponge gaskets and cushioning pads, supplied in custom die cut, water jet cut, and slit-to-width configurations, come in thicknesses from .032-.50 in. Formulations R10470-M (medium compressibility) and R10470-F (firm) are general-purpose silicone sponge, R10480-S (soft) and R10480-M maintain resiliency under extended compression, and R10460 adds flame-retardance. R10450 is constructed of silicone sponge with fiberglass reinforcement. Read More

Services, Mounting & Attaching Products

Liquid Injection Molding can handle large parts.

January 13, 2005

To support molded silicone rubber requirements that would typically exceed those for liquid injection molding (LIM) processing, LIM manufacturer offers shot size of 380 g and platen designs for injection molded gaskets up to 12 x 12 in. or 8 x 20 in. LIM silicone withstands temperatures from -100 to +450°F, and cure cycles range from 30-90 sec. Process targets medical diagnostic, analytical instrumentation, communications, navigation, safety, and food processing industries. Read More

Other Company News from
Stockwell Elastomerics, Inc.