MEDER Electronic Co.
West Wareham, MA 02576
Share:
Threaded Reed Sensors are available in brass..
Supplied in threaded style housing, MK11/B comes with accompanying hardware that facilitates exact adjustment in limit switch, end position, and proximity sensing applications. Brass housing withstands higher torque settings and temperatures as well as moisture and compression. Also, non-ferromagnetic properties eliminate any potential magnetic switching interferences. Four metric thread sizes...
Read More »Reed Relay allows for multiple I/O options.
With package height of 0.157 in. that enables parallel board stacking, RM Series features 3 I/O options (4/2, 4/4, 4/1 in-/outputs) on rugged thermoset epoxy overmolded FR-4 substrate. Capable of switching beyond 3 GHz with less than 40 ps rise time, relay switches into range of operations. Leadless SMT design eliminates skewing and co-planarity concerns. Short BGA terminals allow short signal...
Read More »Reed Relay enables tight relay matrix mounting.
Measuring 15.2 x 3.8 x 6.6 mm, MS Series Micro SIL Reed Relay has 1 GHz flat bandwidth making it suitable for use in ATE systems, medical applications, and security systems. Device is capable of switching up to 10 W with individual maximums of 1.0 A and 200 V. Coil to switch isolation is minimum of 1,500 Vdc with minimum dielectric strength of 250 Vdc across contacts. Relays are RoHS compliant,...
Read More »
Reed Relay Module offers 3 input-output options.
Low Profile RM Series offers 4 inputs with 4, 2, and 1 output(s) on rugged thermoset epoxy overmolded FR-4 substrate. Capable of switching beyond 3 GHz with less than 40 ps rise time, relay provides billions of operations. Leadless SMT design eliminates skewing and co-planarity concerns, while short BGA terminals allow short signal path that makes series suited for RF applications and reflow up...
Read More »
MMS Reed Sensor incorporates semiconductor wafer technology.
Ultra-miniature SPST Micro Machined Reed Sensor is available in 2.8 x 2.0 mm square surface mount package. MMS sensor is offered in Tape and Reel formats for SMT processing. It features 3 Vdc max switching voltage, and 109 Ω insulation resistance across contacts. Unit draws no current while in open position and is suited for battery or other applications where available power is minimum.
Read More »
Reed Relays handle high voltage applications.
Available in high-frequency and high-power configurations for PCB-mount and free-standing applications, High Voltage Reed Relays offer switch voltages up to 10,000 Vdc and breakdown voltages to 15,000 Vdc, with 1,000 Gigaohm between coil and contact. Able to carry up to 5 A current, they are available with 1 to 2 Form-A, 1 Form-B, or 1 Form-C contacts. Reed Relays can include power switching up...
Read More »
Reed Relays are available with up to 50 W contact rating.
MS Series Micro SIL Reed Relays are capable of up to 1,000 V switching, with up to 3 A carry current. Featuring molded construction with internal magnetic shield providing 1013 Ohms typical insulation resistance, they are offered in 5 and 12 V versions with optional EMI shielding. Designed for pick-an-place assembly equipment, relays measure 15.2 x 5.0 x 7.2 mm and have 1-Form-A (SPST) contacts....
Read More »
Reed Sensors mount on any fixed surface.
MK20 Series Cylindrical Reed Sensors are magnetically operated reed proximity switches available in 3 versions with 10-15, 15-20, and 20-25 AT magnetic sensitivity. Potted inside plastic case, sensors measure 0.118 in. OD by 0.335 in. long. They have 5W contact rating, 175 Vdc or Vac peak switching voltage, 0.25 A switching current, 0.5 A carry current, and 300 mohm static contact resistance....
Read More »
Reed Relay has >10E+14 ohms insulation resistance.
Low-profile CR-Series leadless 50 Ohm reed relay switches at speeds up to 6 GHz with less than 40 ps rise times. To eliminate potential packaging stress, it is made with ceramic case that matches thermal coefficient of expansion of reed switch glass and reed lead. Capable of withstanding reflow soldering operations up to 260 deg C, it uses no internal solder, and has 1 microV typical thermal...
Read More »
Threaded Reed Sensors are available in brass..
Supplied in threaded style housing, MK11/B comes with accompanying hardware that facilitates exact adjustment in limit switch, end position, and proximity sensing applications. Brass housing withstands higher torque settings and temperatures as well as moisture and compression. Also, non-ferromagnetic properties eliminate any potential magnetic switching interferences. Four metric thread sizes...
Read More »Reed Relay allows for multiple I/O options.
With package height of 0.157 in. that enables parallel board stacking, RM Series features 3 I/O options (4/2, 4/4, 4/1 in-/outputs) on rugged thermoset epoxy overmolded FR-4 substrate. Capable of switching beyond 3 GHz with less than 40 ps rise time, relay switches into range of operations. Leadless SMT design eliminates skewing and co-planarity concerns. Short BGA terminals allow short signal...
Read More »Reed Relay enables tight relay matrix mounting.
Measuring 15.2 x 3.8 x 6.6 mm, MS Series Micro SIL Reed Relay has 1 GHz flat bandwidth making it suitable for use in ATE systems, medical applications, and security systems. Device is capable of switching up to 10 W with individual maximums of 1.0 A and 200 V. Coil to switch isolation is minimum of 1,500 Vdc with minimum dielectric strength of 250 Vdc across contacts. Relays are RoHS compliant,...
Read More »
Reed Relay Module offers 3 input-output options.
Low Profile RM Series offers 4 inputs with 4, 2, and 1 output(s) on rugged thermoset epoxy overmolded FR-4 substrate. Capable of switching beyond 3 GHz with less than 40 ps rise time, relay provides billions of operations. Leadless SMT design eliminates skewing and co-planarity concerns, while short BGA terminals allow short signal path that makes series suited for RF applications and reflow up...
Read More »MEDER Electronic, Inc. - Launches New Website
MEDER electronic, Inc. today introduced its newly redesigned company website at www.meder.com. The new site highlights MEDER's expanding line of reed solutions, while improving the information flow to customers. Developed and enhanced internally by MEDER's global marketing efforts, the revised site is more intuitive, easier to navigate and more accessible by search engines. It features a fresher...
Read More »
MMS Reed Sensor incorporates semiconductor wafer technology.
Ultra-miniature SPST Micro Machined Reed Sensor is available in 2.8 x 2.0 mm square surface mount package. MMS sensor is offered in Tape and Reel formats for SMT processing. It features 3 Vdc max switching voltage, and 109 Ω insulation resistance across contacts. Unit draws no current while in open position and is suited for battery or other applications where available power is minimum.
Read More »
Reed Relays handle high voltage applications.
Available in high-frequency and high-power configurations for PCB-mount and free-standing applications, High Voltage Reed Relays offer switch voltages up to 10,000 Vdc and breakdown voltages to 15,000 Vdc, with 1,000 Gigaohm between coil and contact. Able to carry up to 5 A current, they are available with 1 to 2 Form-A, 1 Form-B, or 1 Form-C contacts. Reed Relays can include power switching up...
Read More »
Reed Relays are available with up to 50 W contact rating.
MS Series Micro SIL Reed Relays are capable of up to 1,000 V switching, with up to 3 A carry current. Featuring molded construction with internal magnetic shield providing 1013 Ohms typical insulation resistance, they are offered in 5 and 12 V versions with optional EMI shielding. Designed for pick-an-place assembly equipment, relays measure 15.2 x 5.0 x 7.2 mm and have 1-Form-A (SPST) contacts....
Read More »
Reed Sensors mount on any fixed surface.
MK20 Series Cylindrical Reed Sensors are magnetically operated reed proximity switches available in 3 versions with 10-15, 15-20, and 20-25 AT magnetic sensitivity. Potted inside plastic case, sensors measure 0.118 in. OD by 0.335 in. long. They have 5W contact rating, 175 Vdc or Vac peak switching voltage, 0.25 A switching current, 0.5 A carry current, and 300 mohm static contact resistance....
Read More »
Reed Relay has >10E+14 ohms insulation resistance.
Low-profile CR-Series leadless 50 Ohm reed relay switches at speeds up to 6 GHz with less than 40 ps rise times. To eliminate potential packaging stress, it is made with ceramic case that matches thermal coefficient of expansion of reed switch glass and reed lead. Capable of withstanding reflow soldering operations up to 260 deg C, it uses no internal solder, and has 1 microV typical thermal...
Read More »