Zetec, Incorporated
Snoqualmie, WA 98065
Share:
UT Data Acquisition System offers real-time compression.
Suited for use in power generation industry, Z-Scan UT features 8 ultrasound channels with linear and logarithmic amplifiers. Data processing functions, such as averaging, rectification, smoothing, data compression by n, and compression by peak detection, work in combination and perform in real-time without loss to global system performance. UltraVisionÃ-® software for setup and data...
Read More »Software manages acquisition and imaging of UT signals.
Offering real time imaging of ultrasonic (UT) signals, UltraVision(TM) acquisition software features graphic interface with user defined screen layouts and automated tools that facilitate analysis of data files generated by any data acquisition unit. Similar interface for all operations eliminates need for training when user switches between data acquisition systems. Operating under Windows...
Read More »
Software facilitates eddy-current inspection.
Eddynet Inspection Management System - Balance of Plant (EIMS-BOP) organizes, tracks, and creates reports of eddy-current inspections of heat exchangers in balance-of-plant applications. Software, with tubesheet builder, aids users in building maps of tubesheets, planning their inspection, and managing analysis results. Single relational database stores all inspection information from test plans...
Read More »
Probe Control System inspects tubes in steam generators.
By combining features of PM-3A Controller, HS MRPCÃ-® Controller, and two 10D Probe Pusher Power Supplies, modular Dual Probe Control System streamlines eddy current testing for cracks and flaws. Product supports up to 2 MRPC Motor Units at 2,400 rpm. Tubular Drive Unit System is designed to extend through square bends in steam generator tubing. Drive shaft resides within solid nylon,...
Read More »
Scanner inspects holes for aerospace applications.
Using eddy current technology, ZS-4 High-Speed Scanner detects cracks and flaws in small diameter holes. Two push buttons remotely control Hold and Balance functions on connected instrument. Red LED lamps, located on both sides of scanner, inform operator of alarm condition and internal YT trigger output allows synchronized YT display of flaw responses. Unit's 3-position toggle switch sets...
Read More »Saturation System provides tube and pipe inspection.
When combined with MIZ-27CT Component Test Instrument and Z100 Probe, SU-100 Magnetic Saturation System can detect through-wall defects to 0.028 in. Air-cooled system allows integration into existing manufacturing lines. Saturation System and Z100 Dual Differential Encircling Probe accommodate tubes and pipes from 10-100 mm diameter OD. Driven by multi-frequency, multichannel, MIZ-27CT eddy...
Read More »
Tester suits tube inspection in nuclear steam generators.
Model MIZÃ-®-70 Eddy Current Instrument supports up to 32 frequencies during data acquisition and offers sample rates up to 16,000 samples/sec. Comprised of CPU, frequency synthesizer, and analog processor, it performs all necessary testing functions, including frequency generation from 10 Hz to 10 MHz. Its 10/100BaseT network interface provides data communication between the MIZ-70 and HP...
Read More »
Handheld Instruments provide nondestructive testing.
MIZ-®-21SR Multimode Tester combines eddy current and bond testing in single unit. It detects fatigue cracking, corrosion, and heat damage. MIZ-®-21B Eddy Current Tester can store and recall up to 50 test configurations. User can choose 1 or 2 of 7 different eddy current display modes for clear analysis of inspected area. S-21R Bond Tester offers sondicator and resonance modes. Sondicator mode...
Read More »UT Data Acquisition System offers real-time compression.
Suited for use in power generation industry, Z-Scan UT features 8 ultrasound channels with linear and logarithmic amplifiers. Data processing functions, such as averaging, rectification, smoothing, data compression by n, and compression by peak detection, work in combination and perform in real-time without loss to global system performance. UltraVisionÃ-® software for setup and data...
Read More »Software manages acquisition and imaging of UT signals.
Offering real time imaging of ultrasonic (UT) signals, UltraVision(TM) acquisition software features graphic interface with user defined screen layouts and automated tools that facilitate analysis of data files generated by any data acquisition unit. Similar interface for all operations eliminates need for training when user switches between data acquisition systems. Operating under Windows...
Read More »
Software facilitates eddy-current inspection.
Eddynet Inspection Management System - Balance of Plant (EIMS-BOP) organizes, tracks, and creates reports of eddy-current inspections of heat exchangers in balance-of-plant applications. Software, with tubesheet builder, aids users in building maps of tubesheets, planning their inspection, and managing analysis results. Single relational database stores all inspection information from test plans...
Read More »
Probe Control System inspects tubes in steam generators.
By combining features of PM-3A Controller, HS MRPCÃ-® Controller, and two 10D Probe Pusher Power Supplies, modular Dual Probe Control System streamlines eddy current testing for cracks and flaws. Product supports up to 2 MRPC Motor Units at 2,400 rpm. Tubular Drive Unit System is designed to extend through square bends in steam generator tubing. Drive shaft resides within solid nylon,...
Read More »
Scanner inspects holes for aerospace applications.
Using eddy current technology, ZS-4 High-Speed Scanner detects cracks and flaws in small diameter holes. Two push buttons remotely control Hold and Balance functions on connected instrument. Red LED lamps, located on both sides of scanner, inform operator of alarm condition and internal YT trigger output allows synchronized YT display of flaw responses. Unit's 3-position toggle switch sets...
Read More »Saturation System provides tube and pipe inspection.
When combined with MIZ-27CT Component Test Instrument and Z100 Probe, SU-100 Magnetic Saturation System can detect through-wall defects to 0.028 in. Air-cooled system allows integration into existing manufacturing lines. Saturation System and Z100 Dual Differential Encircling Probe accommodate tubes and pipes from 10-100 mm diameter OD. Driven by multi-frequency, multichannel, MIZ-27CT eddy...
Read More »
Tester suits tube inspection in nuclear steam generators.
Model MIZÃ-®-70 Eddy Current Instrument supports up to 32 frequencies during data acquisition and offers sample rates up to 16,000 samples/sec. Comprised of CPU, frequency synthesizer, and analog processor, it performs all necessary testing functions, including frequency generation from 10 Hz to 10 MHz. Its 10/100BaseT network interface provides data communication between the MIZ-70 and HP...
Read More »
Handheld Instruments provide nondestructive testing.
MIZ-®-21SR Multimode Tester combines eddy current and bond testing in single unit. It detects fatigue cracking, corrosion, and heat damage. MIZ-®-21B Eddy Current Tester can store and recall up to 50 test configurations. User can choose 1 or 2 of 7 different eddy current display modes for clear analysis of inspected area. S-21R Bond Tester offers sondicator and resonance modes. Sondicator mode...
Read More »