SoC Imaging Solution suits professional CCTV applications.
Designed to meet sensitivity demands of security market, OV7960 is based on 6 x 6 Ã-µm OmniPixel3-HS(TM) front side illumination pixel architecture and provides full functionality of single-chip digital/analog NTSC/PAL sensor. Low light sensitivity of 12 V/lux-sec aids with vivid image capture in challenging lighting conditions, and various image processing functions are programmable via...
Read More »
Confocal Chromatic Sensor has expanded external diameter.
Offered in 4 versions with measuring ranges between 0.4 and 10 mm, optoNCDT has 8 mm external diameter as well as digital aperture optimized for receiving reflected light. Ancillary lens is positioned in light path before thin gradient index lens with its exactly adapted refractive index profile. Due to divergence, relay lens optimizes level of reflected light detected from target, suited for if...
Read More »Sensor provides 9 megapixel photography/1080p HD video.
Featuring 1.75 micron OmniPixel3-HS(TM) architecture, OV9810 delivers low-light sensitivity at 960 mV/lux-sec. With 10 x 10 mm footprint package, unit can operate at 8.9 fps in full 9 megapixel resolution and offers HD quality video at 30 fps. It can also provide various output formats over digital video parallel or MIPI port, controlled by SCCB interface through which all image processing...
Read More »New Video Instructions for Popular Label Sensor
St. Paul, MN USA, February 11, 2009 The very popular LRD6110 label sensor from Lion Precision now offers video setup instructions. Unlike photo-eyes (optical sensors), the LRD6110 does not use changes in contrast for operation. The sensor works equally well with standard labels and clear-on-clear labels without the need for eye-marks. The setup procedure is slightly different than a photo-eye. To...
Read More »
MITIGATING OPTICAL SUPPLY CHAIN RISKS
This white paper provides an overview into mitigating the optic supply chain, common issues and proposed solutions.
Read More »
SharpEye 40/40 Series Receive FM Approval for Use in Hazardous Locations
Cedar Grove, NJ (February 6, 2009) - The new explosion-proof SharpEye 40/40 Optical Flame Detector series have been tested by FM Approvals (project ID 3029553) and received the official approval for use in hazardous (classified) locations in the US and Canada. The entire line of optical flame detectors will be listed in the Factory Mutual Approval Guide on their Online Publication of FM...
Read More »
Color Sensor Module targets backlighting applications.
Featuring integrated signal processing and 4 programmable amplifier channels, low-profile True Color Sensor TIAM3 is suited for implementing RGB-LED backlighting control in flat screens. Spectral characteristics of filter curves are optimally tuned for eye-accurate LED color control requirements. Applications include displays for photograph and image editing, visual medical diagnostics, or...
Read More »
Image Sensors extend depth of field in phone cameras.
Featuring Ã-¼ in. optical format, 3.15-megapixel Models VD6853 and VD6803 provide integrated Extended-Depth-of-Field capabilities ranging from 15 cm to infinity. Units include image enhancement filters and 4-channel anti-vignette to balance uneven illumination. Model VD6803 is available with 10-bit parallel legacy interface, while Model VD6853 features CCP2 interface. Enabling camera modules...
Read More »
Multiple Color Sensor is semiconductor-based.
Analyzing color on radiometric level, MMCS6 Multiple Color Sensor integrates interference filters and combines them with seven overlapping spectral bands ranging from 380-780 nm. It filters out metamerism effects during capturing and analysis and is not affected by quality of light source. Sensor comes with software library for accurate and fast color measurement using hand-held or in-line...
Read More »Camera Chips facilitate mobile phone design.
Measuring 2.5 x 2.9 x 2.5 mm, CameraCube(TM) 400 x 400 Model OVM6680 and VGA Model OVM7690 combine functionality of single-chip image sensor, embedded image processor, and wafer-level optics in one package. Three-dimensional reflowable devices can be directly soldered to PCB with no socket or insertion required, eliminating need for additional components. With thermal tolerance to 260Ã-
Read More »
Optical Angle Sensor
TR Electronic North America - February 5, 2009 Troy, Michigan & London, ON, Canada TR Electronic has introduced a new sensor solution to the North American market. Manufactured by di-soric GmbH, the new OGL 55/54 sensor provides an alternative to proximity sensors for demanding applications such as stamping, automotive and industrial machine design. ABOUT ANGLED FORK SENSORS For presence and part...
Read More »
SEALTITE® Fittings and Cord Grips Offer Longer Lasting Protection
Anamet Electrical's 316 Stainless steel SEALTITE® fittings and UL-listed cord grips protect sensitive wiring components from fluids, corrosive contaminations, bumps, and abrasions with a steel core and liquid tight conduit jacket. Check out this video to learn more.
Read More »
