New EE23 Series Transmitters are Offered with Corrosion Resistant Coating
The EE23 Series Humidity and Temperature Transmitters are available for wall or duct mount versions with a IP65 / NEMA 4 rated polycarbonate or metal enclosure. The units come in three part design that includes back cover with terminals for wiring, pluggable active part with electronics and probe and a front cover. They offer the measured data in two current or voltage outputs. The transmitter...
Read More »
New Simrad Active Imaging Sonar Improves Scanning Sonar Technology
Active Imaging Sonar features detailed, high-resolution imaging of structures, fish and bottom composition operating at 800kHz or 455kHz frequencies, at distances up to 300 feet from either side of the boat. Two models are available, 3-in-1 and standalone.
Read More »
Vaisala Presents HMD62 and TMD62 Transmitters with IP66/NEMA 4-Rated Metal Bodies
The HUMICAP® HMD62 Transmitter is used for monitoring humidity and temperature whereas the TMD62 for temperature measurements. The HMD62 unit calculates dew point, wet bulb, enthalpy, absolute humidity, and mixing ratio and delivers measurement accuracy of up to ±1.5 % RH and ±0.1 °C (±0.18 °F). It is resistant to chemicals and dust and can be configured using via Insight PC software.
Read More »
Latest Signet 9950 Dual Channel Transmitter Now Supports Signet 2751 pH/ORP Smart Sensor Electronics
The Gen2 Signet 9950 Dual Channel Transmitter is now compatible with Single Channel Direct Conductivity and Dual 4 to 20 mA Current Loop output modules. The unit automatically measures pH glass impedance, detects broken glass and reads stored data in Signet DryLoc pH and ORP electrodes. It is capable of reading multiple measurements that reduces the number of transmitters needed. The transmitter...
Read More »
There's More to Plating than You Zinc!
To find out more about the seven demands you should make of your zinc plater, download now.
Read More »
New AssetScan Transmitters Provide Remote Alert Notifications
ATEK Access Technologies adds AssetScan ASV (vibration) and ASM (multipurpose) transmitters to measure process variables. The ASV transmitter features dual inputs and can measure overall vibration, bearing faults and generates notification when alert levels are reached. The ASM transmitter is designed for monitoring two 4-20 mA loop powered instruments. The units enable user to continuously...
Read More »
New AcuDew Moisture Transmitter Allows Orientation Adjustment
The AcuDew Moisture Transmitter features 2-1/4 in. dial with a four-digit LED display. The unit comes with AD-LPD plug-in dew/frost point module that can be connected in to the cable connector of AcuDew. The transmitter meets ISO/IEC 17025:2005 calibration standards.
Read More »
AW-Lake Company and KEM Expand the TRICOR Line of Mass Flow Meters with the TCD 9000 Series Transmitters
AW-Lake Company and KEM Kuppers Eletromechanik GmbH’s TRICOR line of Mass Flow Meters features a graphical display, sensor checking, troubleshooting wizards and SD card connectivity. The TRICOR line has expanded to include the TCD 9000 Series Transmitters, and the standard and advanced flow meters.
Read More »
New AcuDew Moisture Transmitter Comes with Field Span Verification
AcuDew Moisture Transmitter features high capacitance aluminum oxide sensing element and 4 to 20 mA outputs corresponding to measured moisture content. Unit is configured to parameters such as dew/few point temperature, parts per million by volume or parts per billion by volume. FSV option enables user to achieve accuracy of the transmitter between annual factory recalibrations. AcuDew...
Read More »
Inovonics Launches the EN1550RP Encoder Pulse Transmitter for Mixed Use Property Without Deploying a Second System
Inovonics’ EN1550RP converts data from a Neptune E-CODER register into a pulse count, making it an ideal choice for utility billing service providers when submetering a mixed-use or light commercial property. It can be a better submetering solution for strip malls where a single tenant is using high volume of water than the other businesses at that location.
Read More »
New RF Receiver and Transmitter Provide Tuning Range from 75 MHz to 6 GHz
Richardson’s ADRV9008-1 (receiver) and ADRV9008-2 (transmitter) feature a bandwidth of 200 MHz and 450 MHz respectively. ADRV9008-1 is designed for 3G/4G/5G macrocell, frequency division duplex (FDD) and base station applications. ADRV9008-2 offers dual channel transmitters, observation path receiver and digital signal processing functions. The receiver and transmitter come with 12.288 Gbps...
Read More »
ISO-Certified Precision Machining and Contract Manufacturing Services from DFF
DFF is an industry leading contract manufacturer specializing in medium to high production precision machined components and electromechanical assemblies. Our 100 CNC machining centers and design-assist capabilities ensure our customers' needs are always met. Check out our video to learn more.
Read More »
