Terminal Blocks

Terminal Blocks

DIN Rail Terminal Block supports Type J and K thermocouples.

Measuring 10.7 mm in width,Â- DIN Rail Terminal Block features built-in miniature female thermocouple connector that enables fast auditing and troubleshooting. Fully enclosed unit mounts to 32 or 35 mm DIN rail and requires no end plates. Terminal block connects directly to handheld meter for data collection, quality compliance, troubleshooting, and calibration.

Read More »
Power Distribution Units have 38 mm depth, 1.47 in. profile.
Terminal Blocks

Power Distribution Units have 38 mm depth, 1.47 in. profile.

Routing power supplies to PLCs, I/O, and associated components within space-restricted panels, DIN-rail mount Power Distribution Blocks include 4 models rated up to 30 A and one model up to 65 A. There are 2 poles for connecting both sides of power supply output and daisy-chainingÂ- offered on 30 A block, and connection configurations range from 2 x 8 to 2 x 24; 65 A unit is...

Read More »
Compact Distribution Blocks feed current to multiple circuits.
Terminal Blocks

Compact Distribution Blocks feed current to multiple circuits.

At 27.5 mm wide and 46.5 mm high, GDBD16 and GDBD35 offer connection possibilitiesÂ- which include 10–2 AWG incoming and 14–4 AWG outgoing. Typical applications include distribution of single-phase supply with high current to various load circuits with lower current requirements, and 3 distribution blocks can be used in 3-phase applications. Shell is made of Polyamide 6.6 Class V2...

Read More »
Power Distribution Blocks carry UL, CSA approvals.
Terminal Blocks

Power Distribution Blocks carry UL, CSA approvals.

Intended for use with listed crimp-type lugs and suited for use with flexible conductor, PDS Power Stud Blocks are approved up to 840 A and 10,000 symmetrical amps. Select sizes have hinged cover to prevent accidental contact. Also available, PDM Power Stud Blocks are approved up to 760 A and 10,000 symmetrical amps.Â- Most sizes come with hinged cover. PDS and PDM units are both...

Read More »
Camdenboss to Launch New Enclosure and Interconnection Products at Electronica 2012
Terminal Blocks

Camdenboss to Launch New Enclosure and Interconnection Products at Electronica 2012

CamdenBoss, Europe's number one E-Mech Partner, is launching a number of new products across its enclosure, interconnection and industrial control ranges at the forthcoming Electronica 2012 exhibition, November 13 to 16, Messe Munich, Germany. New enclosures being launched at Electronica include the 71 and 72 series flanged IP66 cases. The 71 series offers a large, robust enclosure with IP66...

Read More »
Collector Ground Block
Terminal Blocks

Collector Ground Block

The DIN rail mounted collector ground block offers a central location for 8 or 16 termination points for connecting multiple grounding wires.Â-  The block has 1 main lug up to 4AWG and 8 or 16 clamps up to 10AWG.  These blocks are UL listed and are made up of a corrosion resistant brass body with stainless steel screws and clamps.  Copper rail is also available.

Read More »
Terminal Blocks

Thermocouple Terminal Block has DIN rail mount design.

Supplied in plastic housing of gray polyamide 6.6 thermoplastic resin with UL 94 V0 rating for up to 85°C operation, fully enclosed TCB Series has built-in female connectorÂ- for connection to handheld meter. Unit supports thermocouple Type K and J calibrations and does not require any end plates. Mounted on 35 mm DIN rails or 32 mm G-type rails, product features zinc plated steel...

Read More »
Two-Pole Pushbutton SMD Terminal Block carries 600 V/9 A rating.
Terminal Blocks

Two-Pole Pushbutton SMD Terminal Block carries 600 V/9 A rating.

With integrated spacer, 2060 Series 2-pole pushbutton SMD terminal block simplifies design and expedites manufacturing for developers of high-output LED devices. Pushbuttons eliminate PCB lead hand-soldering, and product accommodates solid/stranded conductors (AWG 24-18) -Â- even tinned, top-coated, or pre-bonded ones - within one unit. Solid conductors are pushed-in,...

Read More »
SMT Screw Terminal Blocks support PCB I/O interconnects.
Terminal Blocks

SMT Screw Terminal Blocks support PCB I/O interconnects.

Featuring 5.0 mm pitch and rectangular flat leads, SMarTconn® 974-D-SMD-DS Series supports 0.20 mm co-planarity specification. Units have fixed terminal bodies and 45° inclined tower for wire entry and screwdriver access. Available in 2-6 poles, terminal blocks are constructed for reflow processes used in automated manufacturing systems. Series enables printed circuit board designers...

Read More »
Surface Mount Terminal Blocks feature 3.5 mm pitch.
Terminal Blocks

Surface Mount Terminal Blocks feature 3.5 mm pitch.

Available in 2-12 poles, SMarTconn 930-D-SMD Series is constructed for reflow processes used in automated pick and place assembly systems. Floating pin design ensures total co-planarity adaptation to PCB surface and fully eliminates coefficient of thermal expansion mismatch effect. Suited for high-volume production systems, 930-D-SMD Series enables PCB designers to migrate interconnect components...

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics