New Switches Products

Hall-Effect Latches come in various packaging options.

Produced with BiCMOS technology, A1210/1/2/3/4 feature Hall element geometries and low-offset amps that minimize noise and reduce residual offset voltage. Device programming, performed after packaging, ensures switchpoint accuracy by eliminating offsets that can be induced by package stress. Suited for computer/office, industrial, and automotive markets, switches are offered in 3-pin single...

Geothermal DP Indicator Switch performs low flow monitoring.

Featuring complete high to low side isolation, diaphragm type Model 522 is offered with body materials of aluminum or 316/316L stainless steel and 316 SS, ceramic, and acetal moving parts. It comes with one or 2 field-adjustable, 40-100% FS, hermetically sealed reed switches in SPST (3 A) configuration. Max static pressure is 1,000 psig, max differential over-range pressure is 200 psid, and DP...

Brass Flow Switches offer push-fit installation.

Pushed into 22 mm copper pipe, Models FS13 and FS14 do not require coupling and sealing components, compression fittings, or threaded connection. With sensor connected and mounted vertically in pipe, switches operate at liquid flow rate of 1 lpm and max pressure of 10 bar at 20Ã-

Sensor measures barometric pressure.

Measuring 9 x 9 mm, Intersema MS5534B is an SMD-hybrid device with piezoresistive pressure sensor and ADC-interface IC. With power requirement of 2.2-3.6 V, sensor measures 0-1,100 mbar with temperature range of -40 to 125Ã-

5 Common Liquid Injection Molding Mistakes (And How to Avoid Them)

This guide offers insights about steering clear of common LIM problems and maximizing your project's efficiency.

Toggle Switches are available in low and medium capacity.

With capacities from 3-25 A, electromechanical S series are available in configurations with 1-4 poles in 2 or 3 positions. Bat style toggles range from 12.0-18.0 mm in length and are brass with chrome plating. Panel sealed locking lever versions are rated to IP67 and prevent accidental actuation. Panel-mounted with 12.0 mm threaded bushings, products conform to standard panel cut outs and offer...

Layer 2 Ethernet Switch offers fullwire speed performance.

Along with auto-crossover, auto-polarity, auto-negotiation, and automatic MAC address management authentication capabilities, plug-and-play ComEth4100 provides 8-10 Ethernet ports compliant with 10/100/1000BT. Product, offered in 3U/6U form factor, provides 802.1 Q support for 4K VLANs or port based VLAN, 4K MAC addresses, and port mirroring. For flow control, non-blocking switch features...

Pushbutton Switches feature double break contacts.

With butt action contacts, 1200 Series momentary pushbutton switches operate from -20 to +55Ã-

Industrial Ethernet Switches optimize network performance.

Providing automatic switchover on detected failure, Series ET-9MS supports IGMP and VLAN as well as QoS, RSTP, and SNMP. Virtual LANs segregate network devices into functional groups, providing extra security by allowing devices to only talk to other devices within their VLAN. Internet Group Management Protocol enables managed switches to passively snoop on IGMP router queries and IGMP host...

Managed Switches utilize optical Ethernet transceivers.

TigerSwitch(TM) and TigerStack(TM) are available with six 10 Gigabit uplinks, all of which use IntelÃ-® 10 Gbps optical technology and come in XENPAK and XFP form factors. There are three 10G transceivers for XENPAK uplink: SMC10GXEN-SR, SMC10GXEN-LR, and SMC10GXEN-ER with respective transmission distances up to 300 m, 10 km, and 40 km. Each can be used with 24- and 48-port SMC TigerStack...

Emergency-Stop Switch suits space-sensitive applications.

With EN418 rating and UL-approval, Series 84 features mono-block single piece design, LED illumination, and gold-plated silver contacts. Switch has slightly domed actuator head that provides visible illumination from side view and colored ring that indicates actuated position. Rated for 50,000 operations, unit accepts supply voltages from 5-30 Vdc and can be mounted to front plate with thickness...

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.