New Switches Products

Industrial Ethernet Switch has 5- port design.

Designed for use in applications with limited space, such as automation systems, Skorpion-5 is EISK5-100T switch that occupies only 1 in. of DIN rail. Product requires no operator intervention and operates over 0 to +60Ã-

Gigabit Ethernet Switch PMC Card is conduction-cooled.

Unmanaged ruggedized mezzanine module PGR8 adds Gigabit Ethernet switched networks to VMEbus and CompactPCI-based embedded applications. Compliant with IEEE 802.3 Ethernet standard, it provides integrated 8-port Layer-2 switching and delivers full wire-speed performance over each port. Card supports jumbo packets up to 9,728 bytes and operates in PCI-X and 64-bit/66 MHz PCI modes with 10/100/1000...

Remote Control Switches handle loads up to 250 V, 16 A.

Suited for use in domestic and utility buildings, Series 5TT features actuating voltage of 8-230 V, and is available with 1 or 2 NO contacts or with combination of NO and NC contacts. L and N terminals of several remote control switches can be connected via busbars. Operating state can be quickly ascertained and manually corrected with help of contact position indicator. Switches are suitable for...

Point Level Switches suit all liquid applications.

Based on vibrating short fork technology, Models 2110 and 2120 are virtually unaffected by flow, turbulence, bubbles, foam, vibration, or product variations. Fast Drip fork design means that remaining liquid is drawn away from fork tips, allowing reliable detection in high-density liquids. Operating in temperatures to 302Ã-

EMI Filters 101: Everything You Need To Know

In this eBook, we'll discuss everything you need to know about EMI filters, including their importance, regulatory requirements, and different types.

KVM A/B Switch can be operated remotely.

Enclosed in all-aluminum case, Model 4875 allows access to 2 computer/servers from single set of KVM devices. Switch is actuated by depressing front-panel pushbutton or through rear-panel remote control port. Keyboard ports are transparent to all data, and mouse port connections support PS/2 mouse emulation as required to non-connected computer/server. Monitor/video port signals are regenerated...

Fiber Channel Switch aids in enterprise server applications.

Able to integrate into core or edge SAN configurations, QLogic 4Gb 10 and 20 Port FC Switches for BladeCenter enable end-to-end SAN solutions. McDATA 4Gb 10 and 20 Port FC Switches for BladeCenter offer same functionality, but integrate McDATA fabric into BladeCenter architecture. Also available, QLogic 4GB FC Expansion Cards for BladeCenter increase bandwidth connection between BladeCenter...

Push Button Operators provide safe interruption of circuits.

Intended for emergency stop applications, IEC 22 mm Push-Twist Release push buttons feature heavy-duty polyester construction, corrosion resistance, and electrical insulation. Direct-drive contacts have mechanical linkage from operator to moveable contacts to ensure contact separation when actuated. Offered in NO, NC, NO-Early Make, and NC-Delayed Break configurations, contact blocks include...

Safety Switch carries IP67 protection rating.

Incorporating slim, plastic-bodied design, Series FW has 3 conduit entries in either M16 or M20, double bridge contacts, and aluminum coated screws to prevent oxidation. Option is available for increasing actuator holding force to 30 N. Switch comes with actuator key and is suited for use in severe conditions.

Pushbutton Switches feature RGB LED technology.

Suited for A/V and broadcast markets, Series KP01 enables designers to create customized control panels with project-specific colors. Offered in 12, 15, and 17.4 mm sizes with height of 23 mm off PC board, they feature sculptured square caps that facilitate installation of film inserts. Single-pole, single throw switches are rated 100 mA max at 12 Vdc and offer option of tactile and non-tactile...

Fiber Optic Switch conducts Ethernet in Zone 1 areas.

Certified by KEMA, Single Port Fiber Optic Switch limits energy in fiber optic cable so it can be run without additional protective sheathing in flammable plant areas. DIN rail mounted unit uses 24 Vdc power and comes with four 10/100 MB TX Ethernet connections. Single fiber optic port can be used with DeltaV Zone1 I/O scanner as well as independently of DeltaV system to route Ethernet safely...

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.