Level Switch detects liquid level in shallow tanks.
Model F7-LL Low Liquid Level Switch detects levels as low as 5/8 in. from tank bottom. Device has hermetically sealed reed switch, Polysulfone stem and mounting, and Buna-N float. Applications include water, gasoline, petroleum products, and some oils and chemicals. Switch has temperature range of -40 to 180Ã-
Read More »
A/B Switch is remotely controlled.
Computer or terminal connected to control port sends commands to Model 7212 Remotely Controllable DB25 A/B Switch. Command set allows operator to change switch position and to query switch status. Switch has front-panel pushbutton for onsite switching, while LEDs display switch status. Position and continuity are maintained in event of power failure. Equipped with all aluminum enclosure, switch...
Read More »
Analog Switch replaces two SPDT switches.
Model FSA3357 single pole/triple throw CMOS analog switch features RDS(on) of 6 Ohms, resulting in minimal signal attenuation. Total harmonic distortion of 0.01% coupled with 60 dB crosstalk ensures signal integrity. Wide bandwidth of 250 MHz and rail-to-rail signal handling guarantees clip-free transfer of analog and digital signals. VCC range of 1.65-5.5 V makes device suitable for battery...
Read More »
Digital Temperature Switch has dual input and alarm.
Series TST controls cold regulation, defrost cycles, and evaporator ventilation. Available in 2 models, TST-0110 reads in Ã-
Read More »
How to Choose the Proper Vibratory Conveyor for Your Needs
At Triple/S Dynamics, our goal is to match every single client to a conveyor system that meets their unique needs. This guide aims to provide information on the different types available to help you make the best decision.
Read More »
Miniature Switches suit handheld equipment.
Washable Series G toggle and rocker switches measure .276 x .276 x .177 in., allowing for high-density mounting. Sliding Twin Crossbar contact mechanism ensures that gold-plated contacts are wiped clean with every actuation. Single- and double-pole variations are available with 5 circuit combinations. Molded-in, epoxy-sealed terminals lock out flux, solvents, and contaminants. Switches are rated...
Read More »
Push-Button Switches offer dual and quad lamp design.
Momentary Switches, Models SW44217 and SW44220 feature gold plated contacts and interchangeable lenses with clear top cover, black opaque sides, and legend plates. Designed to accommodate up to four T-1 Sub Midget Flange based lamps or LEDs, switches are rated 30 Vdc or 115 Vac, 2 A resistive, 0.5 A inductive. They measure 0.75 in. sq and require 1.6 in. behind display panel. Interconnection is...
Read More »Push Buttons and Indicators utilize LED technology.
RMQ-TitanÃ-® 22 mm Control Circuit Devices consist of push-button and indicating lights that combine ergonomic styling with LEDs that emit light non-stop for 100,000+ hr and provide low energy consumption from 0.3 W. Products are UL/CSA/CE approved and meet UL 4X, 13, IEC, IP67, and 69K requirements. Devices come in multi-range 12-264 V designs and are vibration-resistant and finger-safe per...
Read More »
Pressure/Temperature Switches suit hazardous locations.
Explosion-proof 120 Series switches provide dual-conduit wiring and cover lock. Wetted materials and pressure port configurations are available for pressure ranges from vacuum to 6,000 psi. Differential pressure models start at pressures of 0.2 in. WCD and extend to 500 psid. Temperature switches offer remote bulb and capillary sensing or local immersion stem and cover ranges from -180 to...
Read More »
Pressure Switches have safe working pressures to 10,000 psi
Pressure Switches measure differential pressure, flow rate, and liquid level. They have safe working pressures to 10,000 psi with absolute, zero-center, and split ranges. Units are 6 in. in diameter. Switch indicator is actuated by rupture-proof bellows differential pressure unit with integral temperature compensation. Single bellows units suit low-pressure air or gas applications with DP of 1...
Read More »
Pressure Switch offers 4-20 mA output signal.
N-Series electronic indicating pressure switch provides pressure indication and switch functions. Users observe values on Ã-½ in. LED display and can toggle between process pressure, setpoint, and reset point. Unit utilizes K Series thin film pressure sensor and circuit board housed in NEMA 4X/IP 66 rated, epoxy-coated, aluminum enclosure. Setpoints with adjustable deadband are available for...
Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.
Read More »
