Rocker Switches satisfy power ratings up to 15 A at 250 Vac.

Series 2600 includes single- and double-pole models available in ON-ON, ON-OFF, and ON-OFF-ON, in both maintained and momentary configurations with 2 or 3 positions. Maximum initial contact resistance is 10 milliohms and minimum dielectric strength is 2,500 Vrms between terminals. All models have .984 x 1.259 in. bezel, project .890 in. through front panel, and snap-fit into .866 x 1.181 in....

Read More »

Power Over Ethernet Switch supplies power to 48 IP devices.

Model EPS48 has 48 Vdc input and provides 48 10/100 Ethernet ports and two 1 Gb/s fiber ports. Industry standard power over Ethernet is supplied on all copper ports, and product supports IEEE 802.3af. Able to supply power for 48 IP devices, switch is connected to any -48 V supply, which enables devices to remain powered in case of AC power failure. Product is managed and configured through...

Read More »
Industrial Ethernet Switch is dust and watertight.

Industrial Ethernet Switch is dust and watertight.

DIOSWITCH Ethernet switch, available in rugged IP67 version, is mountable directly on machine or metal housing can be snapped onto DIN rail. Power supply and 8 ports are wired up via M12 connectors. Switch works on power supplies of 19.2-30 V, and operating temperature range is -25Â-

Read More »
Pressure Switches come in low temperature version.

Pressure Switches come in low temperature version.

In addition to indoor and outdoor fluid applications that require wide operating temperature range, Series 18D LT is suited for pneumatic applications with operating pressures from 14-232 psi. Various fluid connections such as G, NPT, and flange are available. Switches can be used with neutral, gaseous, and liquid fluids that are non-combustible such as those used in mobile applications including...

Read More »
Interlock Switch/Control Unit suits Category 3 applications.

Interlock Switch/Control Unit suits Category 3 applications.

Series CM magnetically-coded, non-contact safety interlock switch and control unit features NEMA 6 encapsulated design and is tamper-resistant. Model CM-S4 control provides external device monitoring and has automatic reset button, which allows it to replace safety relay in most applications. Unit will monitor up to 4 switches to Category 3 in accordance with EN954-1. Switch and actuator come in...

Read More »
Ethernet Switches are suited for dc environments.

Ethernet Switches are suited for dc environments.

DIN rail, wall, and piggyback mount 10/100Base-T Ethernet switches accept voltages from 10-30 Vdc, with surge protection to 3,000 Vdc. ADAM 6521 lets users interconnect 4 copper (RJ-45) and 1 fiber-optic (SC) networks, while ADAM 6520 provides 5 RJ-45 Ethernet ports. Both modules automatically sense 10 or 100 Mbps speeds and provide full and half-duplex flow control. Surge protected to 3,000 Vdc,...

Read More »
Ethernet Switches include unmanaged switch functions.

Ethernet Switches include unmanaged switch functions.

Standard-Function, Industrial Ethernet Switches combine switched Ethernet connectivity for 8 or 16 ports with range of 1 or 2 multi-mode, 100 Mbps, glass-fiber port options. Unmanaged switch functions include redundant power supplies, alarm contact, auto negotiation, and cable auto crossing.

Read More »
Pushbuttons feature solid cast-brass construction.

Pushbuttons feature solid cast-brass construction.

Weatherproof pushbuttons are offered in 2 versions: TA1786CB, with threaded back plate for Â-½ in. conduit mounting, and TA1786B, designed for mounting without conduit. Pushbuttons control bells, buzzers, and other low-voltage audible signals. Standard mounting holes are suitable for replacing similar devices. Areas of use include receiving departments, limited-access retail stores, and homes.

Read More »
Switch Development Kits speed design process.

Switch Development Kits speed design process.

IS-Dev Kit-1 consists of SMARTSWITCH(TM) programmable LCD display module and 2 pcb-mounted tact switches. IS-Dev Kit-2 features 2 SMARTSWITCH(TM) LCD programmable pushbutton switches. Both come on pcb with flash memory, power, and programming connections. IS-Dev Kit-3 consists of panel display unit with 2 SMARTSWITCH(TM) LCD pushbuttons and SMARTSWITCH(TM) LCD display. Using Design Online tools,...

Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics