Shaft Collars

Hinged Shaft Collars simplify assembly in remote locations.
Shaft Collars

Hinged Shaft Collars simplify assembly in remote locations.

Featuring triple-link hinge and captive clamping screw, Hinged Shaft Collars provide same holding power as standard 2-piece collars. Units are available with square, hex, round, and threaded bores, and are suited for assembly or repair in remote access locations such as conveyor systems and other difficult-to-reach machinery and equipment. Offered in steel and 2 grades of stainless steel, collars...

Read More »
Plastic Shaft Mount Components withstand washdown environments.
Shaft Collars

Plastic Shaft Mount Components withstand washdown environments.

Supplied with stainless steel clamping screws, Stafford Plastic Shaft Mount Components are machined from PTFE, Delrin®, nylon, and other thermoplastics for FDA- and USDA-approved processing equipment and conveyors. Specific components include 1- and 2-piece shaft collars, set-screw collars, hinged shaft collars, 1- and 2-piece couplings, and flange mounts, and ID bore sizes from 1–4 in....

Read More »
Lever Actuated Shaft Collars can be moved without tools.
Shaft Collars

Lever Actuated Shaft Collars can be moved without tools.

Featuring integral hinge with conformal cam lever for clamping and knurled nut for adjusting clamping preset, Staff-Lok™ Shaft Collars can be opened, moved, and re-clamped by hand. Units are machined from steel with smooth bore and are suitable for larger, non-rotary applications. Size combinations include: 2 1/8 in. OD with ½, 5/8, ¾, 7/8, and 1 in. bores; 3 ¼ in. OD with 1 1/8, 1...

Read More »
Shaft Collars withstand corrosive washdown applications.
Shaft Collars

Shaft Collars withstand corrosive washdown applications.

Washdown shaft collars are comprised of 303 stainless steel shaft collar, male and female shrouds made from FDA-compliant materials, andÂ- 3 O-rings with FDA-compliant lubrication. Suited for applications in food processing, packaging, and medical industries, regulatory-compliant products come with zinc-coated forged alloy screw for max holding power and will not mar shaft. As only element...

Read More »
Mounting Flange Collar meets heavy-duty application needs.
Shaft Collars

Mounting Flange Collar meets heavy-duty application needs.

Manufactured to requirements, Stafford Heavy-Duty Flange Collar incorporates Accu-Clamp™ non-marring clamping feature machined into square mounting flange. Width of construction and oversize clamping screws maximize axial load capacity, and design provides flatness and perpendicularity to < 0 .001 TIR. Available in 1- and 2-piece styles machined from aluminum, steel, stainless steel, and other...

Read More »
Weldable Shaft Collars include couplings for custom solutions.
Shaft Collars

Weldable Shaft Collars include couplings for custom solutions.

Machined from ANSI 1018 steel, Stafford Weldable Shaft Collars and Couplings can be machined and welded by user for creating custom drive, motion control, and structural design solutions. Styles include one- and 2-piece collars in ¼–6 in. ID sizes and couplings in ¼–2 in. ID sizes. Specials are also available in larger sizes and can incorporate custom modifications such as threaded...

Read More »
Quick Clamping Shaft Collars come in large bore sizes.
Shaft Collars

Quick Clamping Shaft Collars come in large bore sizes.

Available in 0.2500–3 in. and 6–75 mm bore sizes, Quick Clamping Shaft Collars are designed for light duty stationary or low-rpm applications that require quick positioning adjustments or frequent set up changes where use of tools is not practical. Units slide on shaft smoothly, and when installed, handle sits flush with outside diameter, enabling use in rotating applications....

Read More »
Hinged Shaft Collar adjusts, clamps, and locks by hand.
Shaft Collars

Hinged Shaft Collar adjusts, clamps, and locks by hand.

Machined from steel and available in ½–4 in. ID sizes, Staff-Lok™ Hinged Shaft Collar can be adjusted and locked in place by lifting conformal cam lever, moving it along shaft, tube, or pipe, and then retightening by hand. Featuring knurled adjustment screw, collar never requires tools, and is suited for non-rotary applications involving frequent or temporary relocation, such as moving...

Read More »
Plastic Mounting Collars attach power strips and instruments.
Shaft Collars

Plastic Mounting Collars attach power strips and instruments.

Available in 7/8, 1, and 1 Â-¼ in. ID sizes, Plastic Hinged Mounting Collars feature integral hinge, stainless steel clamping screw, and one flat section with hole that permits it to be attached to power strip or other item, and then mounted to tube or pipe. Injection molded collars, offered in custom colors and molding, are suitable for attaching power strips to poles or...

Read More »
Shaft Collars

Misumi's Linear Motion Products Deliver High Value for Machine Builders and Automation System Manufacturers

MISUMI Configurable Components Reduce Costs, Enable Faster Design and Build Schaumburg, IL - MISUMI USA, Inc., a subsidiary of MISUMI Corporation, part of MISUMI Group, Inc. (Tokyo: 9962), now offers the industry's most comprehensive selection of Linear Motion components. The wide range of products provide one-stop shopping for designers and manufacturers of production machinery and factory...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics