Servo Drive features backlash from 19 to zero arc minutes.
Available in 7 sizes from 3–8 in. center distance, Model HP features double-enveloping worm gear technology and zero backlash coupling, which maximizes overall stiffness and ensures proper fit of couplings. Drive delivers output torque up to 120,500 lb-in. and gear ratios from 5:1 to 70:1 in single reduction. Output shaft options include solid, multiple hollow bores, and shrink disc.
Read More »Plug-In Servo Drives output nearly 5 kW from small footprint.
Capable of delivering up to 60 A peak and 30 A continuous, Analog Z-Drive models AZ60A8, AZB60A8, AZ60A8DDC, AZBDC60A8, AZBH60A8, and AZBE60A8 are compatible with brushed and brushless permanent magnet servo motors. Current and velocity mode operation, as well as options for ±10 V or PWM and direction commands, are available. Mounted directly to PCB, drives enable fully integrated designs...
Read More »National Instruments to Resell Kollmorgen Motion Control Products Globally
Partnership brings complete best-in-class solutions and support to global markets and industries RADFORD, VA – Kollmorgen announces that National Instruments (NI) is now a global reseller of Kollmorgen motion control products.Â- As a result, domestic and global OEMs and end-users will benefit from unrivaled support, plus complete machine control solutions that include best-in-class...
Read More »
Analog Servo Drives feature configurable design.
Providing up to 21 kW and 35 kW respectively, Model B060A400AC outputs 60 A peak/30 A continuous, while Model B100A400AC outputs 100 A peak/50 A continuous. Built-in shunt circuit alleviates regeneration issues to maximize deceleration rate of large inertial loads.Â- Operating with 200–240 Vac and 255–373 Vdc, brushless servo drives offer 17 current loop integrator gain settings, 32...
Read More »
Polymer Protection For Optical Fiber
To learn more about the challenges your optical fibers face, and which polymers are best to protect them, download this white paper.
Read More »Servo Drives offer universal encoder interfacing capability.
Offered in 2.1 or 2.7 in. widths, Series ARS 21xx/23xx SE offers choice of 6 single- or 3-phase continuous output power ratings from 0.5–6 kVA, with peak output from 1–12 kVA. Panel/cabinet-mounting units feature compact design with integrated line and motor filters plus integrated brake chopper and braking resistor. Providing overcurrent capability of 4 x continuous output rating, drives...
Read More »11th sercos PlugFest Successfully Completed
sercos international, supplier of the sercos® automation bus, welcomed a number of technology and automation vendors on May 15 and 16 to its 11th sercos PlugFest at the Institute for Control Engineering of Machine Tools and Manufacturing (ISW) at the University of Stuttgart, Germany. During the two-day event, many new sercos products from competing vendors were intensively tested with each...
Read More »
Indexing Servo Motor Drive works with Rockwell Automation® PLCs.
Optimized for pulse duty, indexing servo applications requiringÂ- up to 300% peak torque, dynamic response, and usability, Digitax ST-X has torque range of 6–382 lb-in. (1,147 lb-in. peak) with 230 V, 1Ø and 3Ø and 460 V 3Ø line voltage capabilities. Along with Add-On Instruction (AOI) block programming and built-in EtherNet/IP™, features include EMC...
Read More »
Compact Servo Drives combines high power, compact package.
Designed and built for traction/propulsion, steering, lifting, or any other electrically driven actuation in mobile electric vehicular platforms, M/V™ series motor controllers can deliver 125 A continuous with 200 A peak for 10 sec at 80 Vdc and 100 A fixed continuous at 175 Vdc. These 4-quadrant servo drives provide power from battery supplies with multiple operating modes for either permanent...
Read More »
Compact Intelligent Drives are equipped with CAN interfaces.
Based on closed-frame intelligent drive concept, iPOS3602 BX-CAN and iPOS3604 BX-CANÂ- control rotary or linear brushless, DC brush, and step motors with rated powers up to 144 W and 36 V nominal voltage. Respectively, models can drive 2 and 4 A continuous currents as well as 3.2 and 10 A peak currents at supply voltage from 12–36 Vdc...
Read More »B&R at the 2013 Hanover Trade Show Innovative Automation for Integrated Industrial Applications
The eleven international trade fairs covering all areas of technology that are being held at the Hanover Trade Show (April 8-12, 2013) are a powerful stimulus for investments in automation and technology. BR will be presenting all of their products and services at this industrial automation trade show (Hall 9, Booth D28). One of the main focal points will be the company's latest developments....
Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.
Read More »
