Servo Motor Controllers and Drives

Servo Motor Controllers and Drives

Servo Controller integrates programmable limit switch.

Delivering servo control of NEMA 17 and 23 frame microstep motors, SilverDust(TM) controller/driver features Programmable Limit Switch (PLS) output that can be configured to use any of the available 23 I/O to change states at over 150 pre-defined trigger points. A modulo may be selected to repeat cycle. Output triggering, trigger point values, and number of trigger points can be changed even...

Read More »
Servo Motor Controllers and Drives

Digital Vector Drive combines 4 motor functionalities.

SECO FX4000 Fusion(TM) drive combines functionality of ac flux vector drive, servo drive, programmable motion controller, and PLC. Drive architecture enables Fusion drives to control ac induction, ac synchronous, or brushless dc motors with power range from 1-350 hp. Available in enclosed NEMA 4/12 (up to 40 hp/460 V), NEMA 1 (50 hp and above), or open chassis configurations, modular drives offer...

Read More »
Servo Motor Controllers and Drives

Digital Servo Drive features matchbox-sized design.

Measuring 2 x 1.8 x 0.6 in., Whistle delivers up to Â-½ kW of continuous power at up to 99% efficiency. Unit is small enough to be mounted to motor housing or close to motor. Seven models are available ranging from 1 A, 60 V to 5 A, 100 V continuous. Designed for any type of sinusoidal or trapezoidal current control, Whistle interfaces to brush DC, brushless PM, linear, and/or voice coil...

Read More »
Servo Drives communicate in real-time via Ethernet.
Servo Motor Controllers and Drives

Servo Drives communicate in real-time via Ethernet.

Suited for machine manufacturing in power range from 400 W to 64 kW, bus-capable ACOPOS Servo Drives support operation of all standard motor types. With Ethernet Powerlink network connection, it is possible to operate up to 240 axes on one line using same network. When controlling axes using multiplex operation, transfer speeds of 200 Â-µs are achieved. Extensive diagnostics functions are...

Read More »
Servo Controller/Driver works with microstep motors.
Servo Motor Controllers and Drives

Servo Controller/Driver works with microstep motors.

Featuring sixteen 5-24 Vdc, isolated, bi-directional I/O and 4 analog inputs, SilverDust IGB provides closed loop control for NEMA 17 and NEMA 23 frame I-Grade motor/encoders. Single-axis unit accepts 12-48 Vdc input power and has voltage clamp circuit that dissipates excess power regenerated during rapid decelerations. Along with breakouts for power, communications, and I/O, product has 32K...

Read More »
AC Servo Systems provide 0.08-26.4 lb-ft of peak torque.
Servo Motor Controllers and Drives

AC Servo Systems provide 0.08-26.4 lb-ft of peak torque.

SureServo(TM) digital brushless servo systems include 8 servo motors, in brake and non-brake models, that can be operated with 1 of 3 servo drives. Systems range from 100 W to 3 kW continuous power, and can be controlled in position, velocity, or torque mode. Utilizing 8 programmable inputs and 5 programmable outputs, real-time connectivity with any control system is assured. Configuration and...

Read More »
Servo Motor Controllers and Drives

Digital Servo Drive controls resolver-based ac motors.

Used with brushless rotary servomotors, MicroFlex resolver input model utilizes DSP technology and resolver-to-digital-converter IC. Performance is optimized via software-configurable anti-resonance filters, and space vector modulation techniques control IGBT power devices. Able to operate in torque or velocity control mode, drive uses sinusoidal, resolver-based commutation and features simulated...

Read More »
Servo Motor Controllers and Drives

Servo Control comes in 80 x 50 x 17 mm package.

Based on MotionChip(TM) DSP Control Technology, ISCM4805 Intelligent Servo Control Module is designed to embed motion control, drive, and PLC functionalities in one open frame unit. Software-configurable product, offered in stand alone or multi-axis configurations, drives brushless, DC brush, or step motors up to 200 W. Torque, speed, position, contouring, profiling, e-cams, and step motor...

Read More »
Digital Servo Drive outputs up to 10.0 kW @ 20 A/460 V.
Servo Motor Controllers and Drives

Digital Servo Drive outputs up to 10.0 kW @ 20 A/460 V.

With output power ratings starting at 3.32 kW @ 12 A/230 V, SimplIQ Tuba is offered in six 9.7 x 7.4 x 3.6 in. models. Each features built-in power supply that provides direct ac input from 115-460 Vac @ 50/60 Hz. Operating network functionalities include CANopen DS301, and binary interpreter enables simultaneous CANopen and serial RS232 communications. Intelligent drives come with programmable...

Read More »
Control measures nip force on paper machine winders.
Servo Motor Controllers and Drives

Control measures nip force on paper machine winders.

RCS-microPOS digital servo control reeling system is used to adjust primary arms relief cylinders to correct linear nip force on paper machine winders. Utilizing load cells to measure and control force, unit operates cylinders with full control of position, speed, and acceleration. Operation is carried out via digital inputs from PLC or directly from operators console, while force set value is...

Read More »

All Topics