FUJINON to Introduce Ergonomically Designed Servo Pack and Wireless Control System at NAB 2011
Wayne, N.J., April 1, 2011 - FUJIFILM North America Corporation, Optical Devices Division has announced it will introduce a new ergonomically designed DigiPower servo control system for its Select and Premier Series as well as a wireless control system for all of its 2D and 3D lenses during the 2011 NAB Show in Las Vegas from April 11 through April 14. FUJIFILM North America Corporation, Optical...
Read More »Compact Servo Drives enable decentralized machine concepts.
Covering 120-440 W range, 930K fluxxtorque series accommodates various options for controlling actuators and sensors via integrated digital and analog I/Os. In addition to CAN and PROFIBUS fieldbus protocols, mechatronic units can be integrated into Ethercat networks. Units can be mounted outside control cabinet, directly at process. Other features include support for feedback using single- and...
Read More »
Modular Servo Drive leverages embedded EtherNet/IP technology.
With EtherNet/IP drive support, Kinetix 6500 helps eliminate need for dedicated motion network and allows drives, I/O, smart actuators, and other EtherNet/IP-connected devices to be supported on common network. CIP motion technology combines requirements of deterministic, real-time, closed-loop motion control, offering full compliance with Ethernet standards. For safety, drive includes safe stop,...
Read More »
Smart Ethernet Drives are compatible with Powerlink standard.
Available in power ratings up to 33.5 A, MicroFlex e100 and MotiFlex e100 single- and 3-phase drives can control rotary and linear servo motors, linear motors, and closed-loop vector motors. Embedded Mint Lite capability supports basic motion programming requirements including performing relative and absolute moves, S-ramp profiles, jog and homing movements, and reacting to real-time trigger...
Read More »
Responsible Spill Remediation in the Food & Beverage Industry
There are two major areas in which food & beverage product handling will take place: processing and distribution. As with all product handling scenarios, spills are an inevitable occurrence within both of these spaces.
Read More »Brushed Servo Drives accept bus voltage from 24-180 Vdc.
Designed for use with brushed DC permanent magnet servomotors, A-Series servo drives come in 5 different continuous current output ratings of 2, 4, 8, 12, or 15 A and peak current of three times continuous. Control loops are all analog with digital drive status and fault detection, while inputs and outputs can be set for high or low response. Functioning in either velocity or current mode, drive...
Read More »
Intelligent Servo Drive reaches up to 600 W peak power.
Measuring 65 x 58 x 19 mm, Model IBL3605 embeds motion controller, drive, and PLC in one unit and can control brushless, step, DC, or linear motors up to 180 W. Unit can be used as network drive in distributed motion systems using CAN/CANopen interface, or as standalone motion controller for single-axis control. Motion programming is done from CANopen master via PC/PLC using appropriate motion...
Read More »
CANopen Module for Integrated AC Servo Motors
JVL Industri Elektronik A/S, a Danish company, now represented in Ohio, USA, announces a new expansion, CANopen, module for their MAC, Integrated AC Servo motors The CAN module offers: o Control and setup o Logic I/O for high speed start/stop o CANbus/CANopen DS 301 o CANopen DSP 402 and DeviceNet under development The module can be delivered with integrated cable with watertight connections for...
Read More »
Servo Motor Controller operates from 12-48 Vdc input power.
CiA DSP 402 CANopen servo motor controller, QCI-D2-IGK, SilverDust IGK is stand alone, single axis controller that includes serial communications (RS-232, RS-485), CANopen and 7 I/O. Features included are 32K non-volatile memory, 100:1 inertial miss-match, PVIA(TM) servo loop, electronic gearing/camming, and multiple thread programming. Product also has built-in voltage clamp, and point to point...
Read More »
Omron's Space-Saving R7D-B Series Servo Drives Deliver Advanced Functionality in an Ultra Compact Design at Low Cost
SCHAUMBURG, IL (September 2008)-Omron Electronics LLC (www.omron247.com) addresses machine builder concerns about how to reduce the complexity of applying servo drives and achieve faster start-up and more reliable operation in a smaller, lower cost package with the new R7D-B Series Servo Drives. Practical functionality featuring simple, real-time auto-tuning and adaptive vibration suppression...
Read More »
Digital Servo Drives feature PCB mount design.
Providing 10-80 Vdc operation while delivering 12 A continuous/20 A peak current, DZ Series can be configured to operate in torque, velocity, and position modes for brushed, voice coil, or brushless motors. Units deliver up to 1 kW continuous power when needed and can achieve up to 98% efficiency. Supporting CANopen and RS-232/485 up to ~1 Mbaud, drives accept variety of input commands including...
Read More »
Triad's Next-Gen Power Supplies Offer Increased Reliability and Reduced Noise Performance
Triad Magnetics, an established leader in power supply design and manufacturing, is proud to announce their next generation WAU AC and WDU DC Series of power supplies. These linear wall plug-ins offer minimum noise performance without sacrificing reliability or life. See our video to learn more.
Read More »
